I'm wrong, does not happen quitting game or reloading ES after updating game list for example, but only after the boot process.
It happend even if i have unplugged the microswitch UP
// Simple arcade stick example that demonstrates how to read twelve
// Arduino Pro Micro digital pins and map them to the
// Arduino Joystick library.
//
// The digital pins 2 - 20 are grounded when they are pressed.
// Pin 10, A10, Red = UP
// Pin 15, D15, Yellow = RIGHT
// Pin 16, D16, Orange = DOWN
// Pin 14, D14, Green = LEFT
// Pin 9, A9 = Button 1
// Pin 8, A8 = Button 2
// Pin 7, D7 = Button 3
// Pin 3, D3 = Button 4
// Pin 2, D2 = Button 5
// Pin 4, A6 = Button 6
// Pin 20, A2 = Select Button 1
// Pin 19, A1 = Start Button 2
// Pin 5, D5 = Other Button
// Pin 6, A7 = Other Button
// Pin 18, A0 = Other Button
// Pin 21, A3 = Other Button
// NOTE: This sketch file is for use with Arduino Pro Micro only.
//
// Original gamepad example by Matthew Heironimus
// 2016-11-24
// Adapted for arcade machine setup by Ben Parmeter
// 2019-05-20
//--------------------------------------------------------------------
#include <Joystick.h>
Joystick_ Joystick(JOYSTICK_DEFAULT_REPORT_ID,JOYSTICK_TYPE_GAMEPAD,
8, 0, // Button Count, Hat Switch Count
true, true, false, // X and Y, but no Z Axis
false, false, false, // No Rx, Ry, or Rz
false, false, // No rudder or throttle
false, false, false); // No accelerator, brake, or steering
void setup() {
// Initialize Button Pins
pinMode(4, INPUT_PULLUP);
pinMode(5, INPUT_PULLUP);
pinMode(6, INPUT_PULLUP);
pinMode(7, INPUT_PULLUP);
pinMode(8, INPUT_PULLUP);
pinMode(9, INPUT_PULLUP);
pinMode(10, INPUT_PULLUP);
pinMode(14, INPUT_PULLUP);
pinMode(15, INPUT_PULLUP);
pinMode(16, INPUT_PULLUP);
pinMode(18, INPUT_PULLUP);
pinMode(19, INPUT_PULLUP);
// Initialize Joystick Library
Joystick.begin();
Joystick.setXAxisRange(-1, 1);
Joystick.setYAxisRange(-1, 1);
}
// Last state of the buttons
int lastButtonState[12] = {0,0,0,0,0,0,0,0,0,0,0,0};
//int buttonMap[16] = {10,15,16,14,9,8,7,6,5,4,20,19,2,3,18,21};
int buttonMap[12] = {10,15,16,14,9,8,7,6,5,4,18,19};
// ButtonMap = 0, Pin 10 = UP
// ButtonMap = 1, Pin 15 = RIGHT
// ButtonMap = 2, Pin 16 = DOWN
// ButtonMap = 3, Pin 14 = LEFT
// ButtonMap = 4, Pin 9 = Button 1
// ButtonMap = 5, Pin 8 = Button 2
// ButtonMap = 6, Pin 7 = Button 3
// ButtonMap = 7, Pin 6 = Button 4
// ButtonMap = 8, Pin 5 = Button 5
// ButtonMap = 9, Pin 4 = Button 6
// ButtonMap = 10, Pin 18 = Select Button 1
// ButtonMap = 11, Pin 19 = Start Button 2
void loop() {
// Read pin values
for (int index = 0; index < 12; index++)
{
int currentButtonState = !digitalRead(buttonMap[index]);
if (currentButtonState != lastButtonState[index])
{
switch (index) {
case 0: // UP
if (currentButtonState == 1) {
Joystick.setYAxis(-1);
} else {
Joystick.setYAxis(0);
}
break;
case 1: // RIGHT
if (currentButtonState == 1) {
Joystick.setXAxis(1);
} else {
Joystick.setXAxis(0);
}
break;
case 2: // DOWN
if (currentButtonState == 1) {
Joystick.setYAxis(1);
} else {
Joystick.setYAxis(0);
}
break;
case 3: // LEFT
if (currentButtonState == 1) {
Joystick.setXAxis(-1);
} else {
Joystick.setXAxis(0);
}
break;
case 4: // Black Button 1
Joystick.setButton(0, currentButtonState);
break;
case 5: // Black Button 2
Joystick.setButton(1, currentButtonState);
break;
case 6: // Black Button 3
Joystick.setButton(2, currentButtonState);
break;
case 7: // Black Button 4
Joystick.setButton(3, currentButtonState);
break;
case 8: // Black Button 5
Joystick.setButton(4, currentButtonState);
break;
case 9: // Black Button 6
Joystick.setButton(5, currentButtonState);
break;
case 10: // Select Button
Joystick.setButton(6, currentButtonState);
break;
case 11: // Start Button
Joystick.setButton(7, currentButtonState);
break;
}
lastButtonState[index] = currentButtonState;
}
}
delay(10);
}
