Hi,
As mentioned, I have. That's what is puzzling me.
Settings I have to play full video from my usb are the following in the file: /recalbox/share/system/recalbox.conf

system.splash.length=-1
system.splash.select=custom

Yet, none play. Any suggestions?

@jorgemagana pretty sure it's unintentional that stella2014 supports those games while stella don't, you should report the missing settings to the author

Double sujet https://forum.recalbox.com/topic/22733/curseur-qui-descend-automatiquement

Thanks for your response.
As said in my first post, I did use Imager v1.4

I will try again this week-end if the new image on the server is good.

@Bkg2k I have 3 MAME subfolders, and these do not show in the Arcade virtual system... Only in the MAME folder.

@Zing I'm using a RPi4 booting from a SD card, ROMs and other system stuff stored in a 32 GB USB stick, fresh install of RB 7.1.1.
When using a MAME folder without any subfolders, the Arcade virtual system shows these ROMs as expected, together with FBNeo (and NEO-GEO, if enabled) so this problem looks like an unforeseen consequence of using subfolders... There is an option to display subfoder contents when in the Arcade menu, but it didn't help.
Nevermind about the Naomi ROMs, the documentation only mentions MAME and FB in the Arcade virtual system, so it probably won't apply to other cores/emulators.

@neo207 Here:

;wifi.ip=manual ip address
;wifi.gateway=new gateway
;wifi.netmask=new netmask

The semicolon at the beginning of the line indicates that this command is not being used, to set the Ip manually you need to configure these 3 fields and remove the semicolon from the beginning of the lines.
If you don't want to test it, that's fine, it's just a test suggestion, as I said, I don't know what it can be and I'm proposing things that might be related, it's "trial and error".

@Pitch64

Perfect - worked!
Thanks

Hello @yobydnub

I thought I saw that @Zing had already answered in this thread:

https://forum.recalbox.com/topic/22516/non-official-recalbox-installation?_=1607340348175

@Pitch64 THX a lot

With rpi3 v7.1.1 it works fine with my TV, kodi has no problem, but with rpi4 there seems to be no solution to black screen in kodi.

Bonsoir,

Suite à mise à jour du GPi Case, le problème est toujours présent. Le D-Pad n’est pas fonctionnel sous Solarus.

En tous cas c’est appréciable ce système de mise à jour automatique 😊

Fixed in discord. The latest line in the list was the right thing to do (global.videomode=default), but it was not in the right file (was in recalbox.conf).

@Zing Thank you very much for the help, this is how I get on first

@acris
ce sujet est CLOS
serait il possible de le mettre SOLVED, CLOSED

@deimos https://forum.recalbox.com/topic/13840/tutorial-how-to-sync-saves-roms-to-the-cloud?_=1603900713296

@Zing

Try connecting your storage device to a computer and checking for errors.

Did you do what I suggested?

Yup, thanks for your reply. Unfortunately what you suggest is actually what I hoped to avoid: I have no extra storage for those ROMs other than the SD where they are right now.

Also I made some bootcmd customizations, and other tunings as well, so I hoped to be able not to do everything manually again.

So the only alternatives a far as I have understood are buying a new SD card and moving all the settings or sticking with Rpi3, right?

J'ai pris le temps de passer mon romset fbneo en version 1.0.0, j'ai tout recrappé et effectivement désormais le filtre est fonctionnel.
Merci @acris d'avoir pris le temps de tester.