Hello,

I´ve been trying to make recalbox work, but for whatever reason, system loose the information of the SSD. I´ve also tryied connecting ssd to pc in order to move (bios/rom7saves/music) folders to another folder a delete recalbox folder content on the SSD in order that at the next reboot recalbox recreate the recalbox folder again on the SSD.

But after a while (maybe 2-3 restarts/shutdown later -not mentioning that recalbox doesn´t seems to shutdown properly the nespi4 case.) the system doesn´t seems to fine the ssd again....

Sometimes it losses after a restart when i add a wifi password sometimes after i do a long scrap procedure...

I also made fresh reinstalls of the recalbox at least 10 times but the issues seems to be always present.

Didn´t try if issues is also present on pi3 or pc version. (will give feedback).

Is there something that can be done over a script or so that would get the ssd to get better initiated or recongnized ?

Best regards.

Hello,

would it be possible to re-add builds 18.07.13 for x86 x64 again.

Dragonblaze works very bad on certains pc models.

Thanx in advance.

Hello, first of all Recalbox is one of the finest thing out there.Thx for all the good work.
Is there some new informations about x86 x64_84 installation/startup issues. I used to have 18.7.13 which was great.
But I never got any update for dragonblaze, which from what I found out on this forum doesn t work. You need to install a fresh copy.
So I made a backup, at least stuff is secured. Used Balenea to install the dragonbalze on my Ssd. Installation stars at least screens shows booting recalbox. After a while the ES interface appears shows which music is playing then goes back to the black screen with booting recalbox. I waited at least 30 min but nothing happend.I am able to acces web interface from the recalbox, from there I restart ES the interface shows up a then dissapears after 5 sec again. This is the issue with x86. On the 64 version interface seems to work a bit better but when I try to pair a bluetooth controller, it also crahes the interface and I m again on the booting recalbox screen. From the webinterface I can also restart Es interface but pairing seems not to work well.
I decided to install the beta version from santa claus and febuary from the forum. The issues is exactly the same.
Cloud it be that the 6 builds version have some hardware compatibility issues?

My config is the following.
Intel Core 2 Duo E8400
Intel Gma4500
Ssd 500G Adata Spx900.

Is there a way to download the 18.7.13 x86 again ?

Best regards.