@oyyodams

Thanks! Any idea when the finished product will be ready?

@oyyodams said in Trouble with Recalbox installation:

@chasem nope, you have to download the beta version for 3b+

I have removed the files from the bezel tutorial bu still all my roms no longer work other than N64, can anyone please help?
here is the support script:
https://file.ac/b2hYy7Z2M7U/
thanks, Ben

@oyyodams Hello, désolé pas trop le temps de tester en ce moment, je suis sur le retest des roms fba_libretro

@anonpebbles you should have 3 partitions, at least. What you mebtiin is the 1st partition used for boot. If you ever reach es, try to make a support archive. Otherwise you may have to laje an img of your sd, upload it si that i can check some logs. But insee no reason why it would reboot

@redcomet hi
What brand is your sd ? We strongly recommend using sandisk

Hey,

there is little bug in the current version. You will have to override the automatic config OR you will have to configure at least this buttons on your controller (maybe the buttons do not exist, but you must set them, don't skip them in the config dialog):

"start" "y" "x" "pageup" "up" "right"

It is the mupenConfig.py that fails, if you missed one button. It takes you back to ES frontend then...

Greetings,
Dominik

hello friend, I've also had this problem with Mayflash .
Try to change my 's makeup , I think that resembles the original N64 touch pad

[HuiJia USB GamePad]
plugged = True
plugin = 2
AnalogDeadzone = 2096,2096
AnalogPeak = 21283,21283
Mempak switch =
Rumblepak switch =
mouse = False
A Button = button(1)
B Button = button(2)
C Button R = axis(3-)
C Button L = axis(3+)
C Button D = axis(2+)
C Button U = axis(2-)
DPad D = hat(0 Down)
DPad L = hat(0 Left)
DPad R = hat(0 Right)
DPad U = hat(0 Up)
L Trig = button(6)
R Trig = button(7)
Start = button(9)
X Axis = axis(0-,0+)
Y Axis = axis(1-,1+)
Z Trig = button(8)

Hello Added rpi3 support (without bluetooth) rpi3 needs a bluetooth dongle.

Did you updated your controllers with the last firmware and used the start mode of the https://github.com/recalbox/recalbox-os/wiki/8bitdo-on-recalbox-(EN) ?

Hi! maybe bit outdated but... i also had problems with the "standard" copy method via smb. To slow and unstable (maybe because of my router? Don´t know yet ...). My solution for copying big, full Rom Collections to the recalbox QUICK is the following: 1. Copy your roms to a blank USB-stick (Fat32) 2. Plug your stick to your pi 3. Connect to your pi via putty ......... lots of tutorials on the web, maybe  https://github.com/digitalLumberjack/recalbox-os/wiki/Root-access-on-terminal-(EN)   4. Then you are ready to copy the roms directly from the stick to a rom folder on your sd card/Recalbox system: On the Terminal (putty) type "mount" for the list of mounted devices. At the end you will find a line like this: "/dev/sda1 on /media/usb0 type vfat .... etc etc". In this case "/media/usb0 is the adress of your usb-stick. ------- look here for help: https://github.com/digitalLumberjack/recalbox-os/wiki/Auto-mount-of-usb-in-place-of-share-partition-(EN) ----------- Now you copy all files from the stick to your sd-card with the CP (copy) command: cp [OPTIONS] SOURCE TARGET For example (copying all files to the roms/snes folder) it would be: cp -rv /media/usb0/* /recalbox/share/roms/snes   Thats it. Copying a full collection of 10 GB took about 15-20 minutes on my pi. Sorry for my bad english, but I hope this helps someone! bye jan