@Voytex86 Thank you 😉

@airdream Hmmm... Thanks, I think i understood... I really would like to play Ocarina of Time again... : /

@Nicola-Silveri I don't know what it could be, if I were you, I would try to rule out the possibilities:

I see that there is a yellow ray being displayed, this indicates that you have a problem with the power source, it needs to be 5V3A (https://www.raspberrypi.org/documentation/configuration/warning-icons.md) Do you have enough space on your SD card? Is your SD card not corrupted? (test with another SD card) I didn’t understand exactly what options you’re changing, I have the impression that you’re creating a new configuration file, and you’re saving to it, but when you exit the game, the emulator is accessing the default configuration file (not the new file), you need to indicate that it is this new file that you want to be used (https://recalbox.gitbook.io/tutorials/configuring-custom-buttons/create-a-custom-configuration-by-emulator), OR, do not save a new configuration file: enter the game, just activate the save option when exiting, exit, open the game again, modify what you want, exit without saving, check.

@Zing Thank You, worked great.

Site full of attitude. DELETED. Moved on to something else.

Regards.

@amirking said in Settings on monitor Sony PVM 14M2U CRT!!!!:

Hello,
I can't find the right setting with my Sony PVM 14M2U monitor.
I have tried various configurations, but the screen is never aligned correctly.

Currently used:

Raspberry Pi 3b
Recalbox 18.07.13
Gert-VGA VGA666 Adapter Board
VGA Male to BNC Male Adapter (5 BNC. 3 RGB + 2 sync H / V)
This is the configuration in the "config.txt" file:

disable_splash=1
disable_overscan=1
gpu_mem_256=128
gpu_mem_512=256
gpu_mem_1024=512
avoid_safe_mode=1
kernel=zImage
overscan_scale=0
disable_audio_dither=1
dtparam=audio=on
dtoverlay=vga666
enable_dpi_lcd=1
display_default_lcd=1
dpi_group=2
dpi_mode=87
hdmi_timings=320 1 16 30 34 240 1 2 3 22 0 0 0 60 0 6400000 1
hdmi_group=2
hdmi_mode=87
I believe that the problem is of the "hdmi_timings" line, in fact even with other values taken from the web, I always get unsatisfactory results. But isn't there any way to put the correct values based on my monitor?

@amirking said in Settings on monitor Sony PVM 14M2U CRT!!!!:

Hello,
I can't find the right setting with my Sony PVM 14M2U monitor.
I have tried various configurations, but the screen is never aligned correctly.

Currently used:

Raspberry Pi 3b
Recalbox 18.07.13
Gert-VGA VGA666 Adapter Board
VGA Male to BNC Male Adapter (5 BNC. 3 RGB + 2 sync H / V)
This is the configuration in the "config.txt" file:

disable_splash=1
disable_overscan=1
gpu_mem_256=128
gpu_mem_512=256
gpu_mem_1024=512
avoid_safe_mode=1
kernel=zImage
overscan_scale=0
disable_audio_dither=1
dtparam=audio=on
dtoverlay=vga666
enable_dpi_lcd=1
display_default_lcd=1
dpi_group=2
dpi_mode=87
hdmi_timings=320 1 16 30 34 240 1 2 3 22 0 0 0 60 0 6400000 1 https://check-distance.com/route/atlanta-ga/macon-ga
hdmi_group=2
hdmi_mode=87
I believe that the problem is of the "hdmi_timings" line, in fact even with other values taken from the web, I always get unsatisfactory results. But isn't there any way to put the correct values based on my monitor?

There is no "perfect" setting as they all need to be adjusted on a case by case basis depending on what the monitor needs. So in short, someone elses values could completely screw you up if they varied drastically from your original values.

Can anyone help me?

@lucinda Je suis toujours dessus actuellement je fais avec, j'ai testé sur mon PC et je n'ai aucun des soucis mentionnés dans mon premier post pourtant... j'ai testé une réinstallation de recalbox tout en essayant d'autres bios dont ceux cités sur le wiki recalbox mais rien ne fait, ça ram quand il y a beaucoup de PNJ 3D à l'écran

@barbudreadmon Je joue sur raspberry pi 3 et je n'ai rien touché concernant l'émulateur en question de la PS1, je joue avec 0 options graphiques si ce n'est le mode lissage de recalbox (j'ai même essayé sans aucuns shaders mais le problème persiste)
Je fais le jeu comme ça, mais j'ai remarqué que le framerate chute (pas injouable, mais perceptible) quand il y a beaucoup de personnages à l'écran, donc je me suis dit que les éléments 3D posaient problèmes

@antonia

Hallo,

redest du von dem hier?
https://github.com/recalbox/recalbox-os/wiki/Retroarch-setup-overlays-%28EN%29

@dav19e this is a functionnality you made / adaptes by yourself so I don't see how we could do support for it.

Also there is no support at all for unofficial images

@agaengster yeah : topic options -> ask a question, do it again to mark it as solved

@alexander-tolstykh the best would be to properly describe your problem, i haven't understood anything

For me, it makes no difference what settings it is in. It always behaves like "default". Where might I have to look to track this down?

Ok I think I have it figured out but I also messed something up. I'll try to post a tutorial for how to do controls for a specific game, if there isn't one already.

In the meantime, I messed something up where with one of the games I was messing with I no longer have access to my hotkey. I also no longer have access to mames config menu (pressing tab while in a game).

The hotkey and the mame config menu all work in other games.

So what did I do and how do I fix this?

When I load the problem rom there isn't any indication that a configuration file was loaded or overridden. So how can I delete any config files that might have been created for this game?