@bkg2k ah ah ah lol

@rob1 le rapport Lxh d'origine est préservé, le but n'est pas d'étendre l'image et la déformer

@cheungbx Note: the last two lines in the recalbox.conf appeared as two lines on this forum but is actually one single line.

Please read the wiki before asking https://github.com/recalbox/recalbox-os/wiki/TFT5-Screen-HDMI-(EN) just adapt the resolution to your 7" screen to 1024 600.

@dinovore it's hardly possible and kind of complicated to set up as it would work with HDMI TV's you've manually setp inside Recalbox

As tu testé ceci ? @dinovore https://github.com/recalbox/recalbox-os/wiki/TFT-Screen-SPI-Bus-(EN)

@psykoknarf Hi, You cannot use both TFT and HDMI screens.

@Substring C'est une batterie LG 3Ah utilisée dans un tutoriel de GBZ (amazon)

@voljega Thank you (again) for your help finding one of the files that I needed to!!

@voljega said in Resizing text for TFT Screen in 4.1: @matra so you mean you can't fing the recalbox theme in 4.1 ? Did you look in both share and share_init paths ? Found it [main.xml] in the share_init path, knew it would be something simple that I was missing! Thanks!

@fs You're right! But the /boot/overlays folder is on a FAT32 partition, so I can't change the permissions. But r-x should be enough, right?

you need to get the dtbo file, take a look a the page https://github.com/recalbox/recalbox-os/wiki/Utility---Use-of-fbcp-for-small-TFT-screen-%28EN%29 and https://github.com/recalbox/recalbox-os/wiki/TFT-Screen-SPI-Bus-(EN) if you do not use the 4.1 release

take a look at https://github.com/recalbox/recalbox-os/wiki/TFT-Screen-SPI-Bus-(EN) (SPI) or at https://github.com/recalbox/recalbox-os/wiki/TFT-Screen-DPI-Bus-(EN) (DPI)

https://github.com/recalbox/recalbox-os/wiki/Make-a-partition-writable-(EN)

Sorry for reviving this topic, but I think the information about this is few, and some more wouldn´t hurt. So, first of all, I am using Putty, notepad++ and FileZilla. I am following the steps shown on: https://github.com/recalbox/recalbox-os/wiki/TFT-Screen-SPI-Bus-(EN) in order to get a 2.8" tft display from waveshare to work. Why am I following the steps to the 3.2" tft if mine is a diferent version? Well, waveshare says "2.8inch RPi LCD (A) and 3.2inch RPi LCD (B) are compatible with each other (the only differences are screen size and keys count), and can be mutually substituted in most cases." (the website: https://www.waveshare.com/product/2.8inch-rpi-lcd-a.htm) So, I want to verify it by managing my 2.8" display to work with recalbox as well, but I am running into some problems, back to the github guide, (sorry for the newbie language and questions) what does " after getting the binary" means? Should I wait for something after making the change to the file? Well, that´s not the question I want to make. What should I do if the comand (chmod 755 fbcp) shows up as "No such file or directory"? I tried and moved the file from my computer to the directory that was ahead of that comand, that was supposed to run. Then, after that, I tried the command again and guess what, it gave me answer! I was like, ok, it was the wrong order, but then, I tried to run fbcp by writing on Putty: fbcp. No such file... Bla bla. So, the screen as well didn´t change from white. I don´t know what to do. I am a student and wanted to use it as a " console" for a project. I guess I will try again tomorrow but I would apreciatte as much help as possible, so that, after I am sucessful I can post on every forum this in order to people as me don´t have so much work and I can test if the 2.8" works as the 3.2". Thanks again, I will post this on other forums too.

Also besseren Bildschirm kaufen Trotzdem Danke!

thanks for all!! i'll buy this one

C'est surtout toi Pour le wiki, je suis pas sur de savoir quoi mettre dedans mais je vais essayer de m'y pencher dans quelque temps. Avec les vacances qui approche, faudra pas être pressé mais ça pourrait servir à quelqu'un

Hi Moris! You .conf is almost good, but leave the blanks out! It's not: fba.shaders = / recalbox / share / shaders / shaders_glsl / crt-pi.glsl but # ------------ I - EMULATORS CHOICES ----------- # ## You can override the global configuration here ## Here is the snes example ;snes.videomode=CEA 4 HDMI snes.core=snes9x_next ;snes.shaders=/recalbox/share/shaders/shaders_glsl/mysnesshader.gplsp ;snes.ratio=16/9 snes.smooth=1 ;snes.rewind=1 ;snes.autosave=0 snes.emulator=default ## If you do not want recalboxOS to generate the configuration for the emulator : ;snes.configfile=/path/to/my/configfile.cfg ## Default Shader for MAME mame.shaders=/recalbox/share_init/shaders/crt-pi.glslp ## Default Shader for FBA and FBA_LIBRETRO fbalibretro.shaders=/recalbox/share_init/shaders/crt-pi.glslp fba.shaders=/recalbox/share_init/shaders/crt-pi.glslp This configuration is for recalbox v4 and the unzipped folder structure should be /recalbox/share_init/shaders/crt-pi.glslp /recalbox/share_init/shaders/crt-pi-barrel.glslp /recalbox/share_init/shaders/crt-pi-mask.glslp and /recalbox/share_init/shaders/shaders/crt-pi.glsl /recalbox/share_init/shaders/shaders/crt-pi-barrel.glsl /recalbox/share_init/shaders/shaders/crt-pi-mask.glsl