n'ayant que la MD Mini Japonaise (j'habite au Japon) je n'ai testé que la 6 boutons officielle sur recalbox et cela fonctionne. J'ai pas pu tester le modele européen, mais suis intéressé par les réponses qui suivront

@Ryga24 Bah je te cache pas que la N64 sur RPI3B+ c'est pas terrible, idem pour la DC, c'est jouable mais on a des glich et/ou des perte de frames importantes en fonction des jeux. Bref dans ce cas l'Odroid XU4 est surement préférable pour toi. Pour ce qui est du PC, j'ai un ASUS portable de 2013 avec carte NVIDIA aussi et ca fonctionne, donc t'as juste 10 ou 15 min a prendre pour essayer (telecharger l'iso, la mettre sur clé USB via Etcher ,et tenter de lancer celle-ci au démarrage sur ton PC)

@martymcfly7 Look at this: https://forum.recalbox.com/topic/18871/recalbox-6-1-pc-la-marche-a-suivre It's in french, but that Talk about boot issue sometime. To Solve it we need to rename the file S03splash in splash 2 choices : mount your hard drive on other system to rename file in /etc/init.d/ connect to your recalbox with ssh and type this command: mount -o remount, rw / mv /etc/init.d/S03splash /etc/init.d/splash` I will try Tommorow

@syfer1987 I'm not sure I understand the situation, but, let me try to help: First, install RECALBOX on a USB stick and check if your computer is compatible, some video cards are not, and if so, there is no point in continuing to try to install in dual boot. RECALBOX is based on Linux, so it is easier and more recommended for you to dual boot with Linux, I think that installing RECALBOX and then LINUX, in that order, is even easier (In the opposite order, I believe it will require that you edit the grub manually). 35Gb is a lot of space if you are not going to put the ROMS on the same HD, I can't say what the minimum space used by the system is, but I think that without any ROM, 4GB should be enough (I'm guessing). If you want to try Recalbox with Windows on Dual boot, I recommend this topic (in French, but it is the best topic on that subject): https://forum.recalbox.com/topic/17464/dualboot-recalbox-windows-sur-pcs-laptops-avec-bios-ou-uefi-27-04-19?_=1585857631180

@alex-lecao verifique as configurações de rede, se está aparecendo um IP e se o status está como conectado, faça um teste abrindo o recalbox manager no navegador (seja em windows, ou andorid, é só abrir estar conectado na mesma rede e entrar com o IP como se fosse o endereço de um site). Qual o seu hardware? Você mesmo montou o seu sistema, ou está usando uma imagem pronta da internet ou comprou tudo pronto?

@snakect Ciao, non so se sei riuscito a fare il boot di Recalbox da USB, ma non e' molto difficile, basta una piccola modifica al file cmdline.txt. Se hai gia' verificato di avere il boot da usb abilitato come dalla guida che hai linkato, scrivi l'immagine sulla chiavetta o sul disco che vuoi usare, nello stesso modo come se fosse una SD. Apri la partizione BOOT (se sei su windows puoi vedere solo quella) e editi il file cmdline.txt con il blocco note e sostituisci mmcblk0p2 con sda2 (o sda1, vedi dopo) la linea originale e': dwc_otg.fiq_fix_enable=1 sdhci-bcm2708.sync_after_dma=0 dwc_otg.lpm_enable=0 console=tty3 consoleblank=0 loglevel=3 elevator=deadline vt.global_cursor_default=0 logo.nologo root=/dev/mmcblk0p2 rootwait fastboot noswap ro e dovra' diventare: dwc_otg.fiq_fix_enable=1 sdhci-bcm2708.sync_after_dma=0 dwc_otg.lpm_enable=0 console=tty3 consoleblank=0 loglevel=3 elevator=deadline vt.global_cursor_default=0 logo.nologo root=/dev/sda2 rootwait fastboot noswap ro Se non dovesse fare Boot vuol dire che hai un Pi3b+ vecchio (prime versioni) in questo caso: dwc_otg.fiq_fix_enable=1 sdhci-bcm2708.sync_after_dma=0 dwc_otg.lpm_enable=0 console=tty3 consoleblank=0 loglevel=3 elevator=deadline vt.global_cursor_default=0 logo.nologo root=/dev/sda1 rootwait fastboot noswap ro Prova e fammi sapere... Buon divertimento

Merci pour ta réponse, je vais attendre alors! Il semblerait même que ça fonctionne aujourd'hui! J'arrive pas à avoir la main sur le message de départ pour le marquer comme résolu, dois-je le supprimer?

@xphere hi, Just remap your controller in Recalbox options.

After some testing, I've realised that there is no need for disabling hci_uart in relalbox 6.1.1 because my USB bluetooth dongle works well on default settings. There is no need for disabling RPi's 3B+ onboard bt module too (by adding dtoverlay=pi3-disable-bt in config. txt).

Intanto e' sorto un altro problema che pero' ho gia' risolto di default il sistema sovrascrive il file /recalbox/share/system/configs/daphne/dapinput.ini ad ogni riavvio del daphne (o meglio del hypseus) perdendo ogni configurazione manuale fatta per il daphne per evitare cio' va inserita questa riga nel file /recalbox/share/system/recalbox.conf ## Daphne emulator daphne.configfile=/recalbox/share/system/configs/daphne/dapinput.ini cosi' ora sono riuscito a configurare un tasto di prova e funziona, nel prossimo reply magari vediamo se riesco a postarvi altre info per una configurazione completa

Après quelques recherches il semblerait qu'il puisse y avoir un lien avec mon HDD externe de format ntfs, suite à quelques conseils je vais tenter de passer sous un format exfat. Pour information je trouve ce qui suit avec la commande dmesg en ssh : [ 23.132173] usb 3-4: device descriptor read/64, error -110 [ 23.368132] usb 4-3: new SuperSpeed USB device number 2 using xhci_hcd [ 23.388709] usb 4-3: New USB device found, idVendor=1058, idProduct=25a1 [ 23.388713] usb 4-3: New USB device strings: Mfr=2, Product=3, SerialNumber=1 [ 23.388715] usb 4-3: Product: Elements 25A1 [ 23.388717] usb 4-3: Manufacturer: Western Digital [ 23.388719] usb 4-3: SerialNumber: 575856314142373633563455 [ 23.389068] usb-storage 4-3:1.0: USB Mass Storage device detected [ 23.389304] scsi host10: usb-storage 4-3:1.0 [ 23.515732] usb 3-4: new full-speed USB device number 3 using xhci_hcd [ 24.412249] scsi 10:0:0:0: Direct-Access WD Elements 25A1 1018 PQ: 0 ANSI: 6 [ 24.412558] sd 10:0:0:0: Attached scsi generic sg2 type 0 [ 24.412711] sd 10:0:0:0: [sdc] 3906963456 512-byte logical blocks: (2.00 TB/1.82 TiB) [ 24.412924] sd 10:0:0:0: [sdc] Write Protect is off [ 24.412926] sd 10:0:0:0: [sdc] Mode Sense: 47 00 10 08 [ 24.413113] sd 10:0:0:0: [sdc] No Caching mode page found [ 24.413115] sd 10:0:0:0: [sdc] Assuming drive cache: write through [ 24.416769] sdc: sdc1 [ 24.417531] sd 10:0:0:0: [sdc] Attached SCSI disk [ 28.764171] usb 3-4: device descriptor read/64, error -110 [ 39.524358] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 39.539255] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 39.540737] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2 [ 39.540739] cfg80211: failed to load regulatory.db [ 39.578586] r8169 0000:08:00.0 eth0: link down [ 39.578587] r8169 0000:08:00.0 eth0: link down [ 39.578679] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 41.284929] EXT4-fs (sdb3): couldn't mount as ext3 due to feature incompatibilities [ 41.285213] EXT4-fs (sdb3): couldn't mount as ext2 due to feature incompatibilities [ 41.305583] EXT4-fs (sdb3): mounted filesystem with ordered data mode. Opts: (null) [ 41.423444] FAT-fs (sda2): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive! [ 43.122787] EXT4-fs (sdb2): re-mounted. Opts: data=ordered [ 43.159406] r8169 0000:08:00.0 eth0: link up [ 43.159414] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 44.380171] usb 3-4: device descriptor read/64, error -110 [ 44.487811] usb usb3-port4: attempt power cycle [ 44.518792] EXT4-fs (sdb2): re-mounted. Opts: data=ordered [ 44.876601] Bluetooth: Core ver 2.22 [ 44.876612] NET: Registered protocol family 31 [ 44.876613] Bluetooth: HCI device and connection manager initialized [ 44.876616] Bluetooth: HCI socket layer initialized [ 44.876618] Bluetooth: L2CAP socket layer initialized [ 44.876621] Bluetooth: SCO socket layer initialized [ 44.932368] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 44.932368] Bluetooth: BNEP filters: protocol multicast [ 44.932371] Bluetooth: BNEP socket layer initialized [ 45.143758] usb 3-4: new full-speed USB device number 4 using xhci_hcd [ 49.072425] snd_hda_intel 0000:01:00.1: IRQ timing workaround is activated for card #0. Suggest a bigger bdl_pos_adj. [ 50.395767] xhci_hcd 0000:09:00.3: Timeout while waiting for setup device command [ 55.771772] xhci_hcd 0000:09:00.3: Timeout while waiting for setup device command [ 55.979746] usb 3-4: device not accepting address 4, error -62 [ 56.107743] usb 3-4: new full-speed USB device number 5 using xhci_hcd [ 61.150370] xhci_hcd 0000:09:00.3: Timeout while waiting for setup device command [ 66.519695] xhci_hcd 0000:09:00.3: Timeout while waiting for setup device command [ 66.727565] usb 3-4: device not accepting address 5, error -62 [ 66.727616] usb usb3-port4: unable to enumerate USB device

@Eptdqcn41700 Oui, il a été une fille aussi je sais plus dans quel post...

@acris svp aide moi comment on configure le dpd 2

@sw7783 Hi, please install Recalbox 6.1.1

@Christophe-Vermand-0 çà ressemble à une mauvaise configuration pour le hdmi_mode dans le fichier de config du raspberry, si tu fais une recherche sur le forum tu devrais tomber sur des topics qui en parlent.