@acris said in Gamecon SNES not working after 6.1 update:

Hello

soluce by Bkg2k : https://forum.recalbox.com/topic/18829/6-1-et-manettes-gamecon/21

Hi acris, thanks for the quick help.

I followed the instructions of that thread, and now it works as always! 😄

These are the posts that I followed (I used Google translator to help me with the French 🙂 )
@bkg2k said in 6.1 et manettes GAMECON:

For those who want / can test:

Get the recalbox_settings file here: > https://mega.nz/#!zNwXRSoQ!1y50jVuEF7rDZrRSC74zJCe7ZIaLJWiBpNPQJUjj4Oc Mount the partition in writing: mount -o remount,rw / Copy it to /usr/bin . To do this: If you are on linux: scp recalbox_settings root@recalbox.local:/usr/bin/ If you are on Windows, copy it to \\recalbox\share , then connect to SSH, and type:
cp /recalbox/share/recalbox_settings /usr/bin
Restart your recalbox, and the GPIO mapping settings will be taken into account again

@legui said in 6.1 et manettes GAMECON:

Paaarfait !!! 😃
Everything is working now!
I specify for those who will try the manipulation, that it must first:

mount your root partition in writing (attention !!!) back up your old file for security copy the new file provided by @ Bkg2k give the right to this new file reboot the recalbox

I do not specify how to do it, because that will not pose problems to those who know how to do, and will spare those who do not know to make a (big) co ** erie. For those here: be patient, the recalbox team is working hard to provide a fix as soon as possible! 😉
Thank you again @ Bkg2k , do not hesitate if you need more tests!

The right file permissions are set with this command:
chmod 755 /usr/bin/recalbox_settings

I I forgot to ask if you followed the tutorial ! 😄

If someone with the same problem passes here here here is the link:
https://recalbox.gitbook.io/documentation/getting-started/manual-recalbox-6.0-dragonblaze/controller-configuration#ps3-controllers

I found a solution!!!

For anyone who also wants to use a 3 button Sega controller, there is an option in the Retroarch menu under Settings—>Input—>Menu Toggle Gamepad Combo. You can set it to Hold Start for 2 seconds to bring up the Retroarch menu.

I’m still waiting on my controllers to be delivered, but I would imagine that I’ll also need to edit the Recalbox controller config file to remove the Hotkey from my 3 button Sega controller.

Edit: I just tested this on another controller and it works perfectly! I set the “Hold Start for 2 Seconds” to return to menu option. I then edited the Emulation Station input config file and set the “Hotkey” button to a number higher than my controller had. I found that if I removed the Hotkey completely, Recalbox would then ask me to reconfigure the controller.

I hope this helps someone!

@giantcoucou just a precision : if I don't touch the USB plugs, the Pi will stay on for a random time before shutting down (usually it stay alived around an hour), then it will stay off for another random delay before waking up some hours later...

@gshoemaker3 did you configure buttons and everything in EmulationStation ?

@smashdde, good to know!

From my experience, the troubles with the encoders have always been due to tiny, f***ing, missed details, from taking wrong shortcuts, and so on... 8-P

Regards

jonas

Holy sh...! It's alive again! I cannot pin the reason down though, but I'm certain it was something I made wrong again and again. Maybe sth. to do with the windows ssh shell (didn't want to set putty up because I find that confusing). Anyway, thanks so much for guiding me through. 🙂

@bkg2k said in Retroarch Mame Conserve paramétrage (shader et vidéo) pour certains jeux.:

Le mieux est encore d'attendre la 6.1 qui ne devrait pas tarder.

Retroarch semble avoir quelques soucis avec les shaders sur Pi entre autre, mais Recalbox 6.1 dispose d'un nouveau systeme de settings qui se loge avec les roms et qui permet de modifier les reglages retroarch.

Merci, finalement j'ai réussi à faire ce que je voulais en associant le shader 'de type miroring c**ktail cabinet' à certains jeux uniquement et pour les autres ils héritent du paramétrage global de mame2003.cfg . Ca fonctionne bien. Il est vrai que les paths pour les .cfg et les .glsl sont un peu "sioux" .. et qu'il ne faut pas oublier de passer en rw le filesystem quand on bricole les configs.

@ranpar1 @Bernie-ran thanks to both of you guys 🙂

@fmo said in 2 MICE TO USE WITH ARKANOID (MAME):

Hello,

How to map 2 mice on Recalbox (Player1=Mouse0, Player2=Mouse1). I built arcade c**ktail table so players can not share same mouse . I've looked previous post about update retroarch.cfg file without sucess.

Thanks,

FM

I add few logs/parameters files about my settings. To get MOUSE_IDX , i looked to /dev/input/by-path folder.
So I guess IDX for mice are 2 and 5.

ls -ltr

total 0
lrwxrwxrwx 1 root root 9 Jan 1 1980 usb-_USB_Keyboard-event-kbd -> ../event1
lrwxrwxrwx 1 root root 9 Jan 1 1980 usb-_USB_Keyboard-event-if01 -> ../event3
lrwxrwxrwx 1 root root 9 Jan 1 1980 usb-PixArt_USB_Optical_Mouse-mouse -> ../mouse1
lrwxrwxrwx 1 root root 9 Jan 1 1980 usb-PixArt_USB_Optical_Mouse-event-mouse -> ../event5
lrwxrwxrwx 1 root root 6 Jan 1 1980 usb-Microntek_USB_Joystick-joystick -> ../js1
lrwxrwxrwx 1 root root 9 Jan 1 1980 usb-Microntek_USB_Joystick-event-joystick -> ../event4

pwd

/dev/input/by-id

cd .. cd by-path ls -ltr

total 0
lrwxrwxrwx 1 root root 6 Jan 1 1980 platform-3f980000.usb-usb-0:1.1.2:1.0-joystick -> ../js0
lrwxrwxrwx 1 root root 9 Jan 1 1980 platform-3f980000.usb-usb-0:1.3:1.1-event -> ../event3
lrwxrwxrwx 1 root root 9 Jan 1 1980 platform-3f980000.usb-usb-0:1.3:1.0-event-kbd -> ../event1
lrwxrwxrwx 1 root root 9 Jan 1 1980 platform-3f980000.usb-usb-0:1.2.3:1.0-mouse -> ../mouse1
lrwxrwxrwx 1 root root 9 Jan 1 1980 platform-3f980000.usb-usb-0:1.2.3:1.0-event-mouse -> ../event5
lrwxrwxrwx 1 root root 9 Jan 1 1980 platform-3f980000.usb-usb-0:1.2.1:1.0-mouse -> ../mouse0
lrwxrwxrwx 1 root root 9 Jan 1 1980 platform-3f980000.usb-usb-0:1.2.1:1.0-event-mouse -> ../event2
lrwxrwxrwx 1 root root 6 Jan 1 1980 platform-3f980000.usb-usb-0:1.1.3:1.0-joystick -> ../js1
lrwxrwxrwx 1 root root 9 Jan 1 1980 platform-3f980000.usb-usb-0:1.1.3:1.0-event-joystick -> ../event4
lrwxrwxrwx 1 root root 9 Jan 1 1980 platform-3f980000.usb-usb-0:1.1.2:1.0-event-joystick -> ../event0

Parameters about mouse in retroarch-core-options.cfg :

/recalbox/share/system/configs/retroarch/cores# grep mouse retroarch-core-options.cfg

input_grab_mouse_toggle = "f11"
input_grab_mouse_toggle_axis = "nul"
input_grab_mouse_toggle_btn = "nul"
input_grab_mouse_toggle_mbtn = "nul"
input_player10_mouse_index = "0"
input_player11_mouse_index = "0"
input_player12_mouse_index = "0"
input_player13_mouse_index = "0"
input_player14_mouse_index = "0"
input_player15_mouse_index = "0"
input_player16_mouse_index = "0"
input_player1_mouse_index = "2"
input_player2_mouse_index = "5"
input_player3_mouse_index = "0"
input_player4_mouse_index = "0"
input_player5_mouse_index = "0"
input_player6_mouse_index = "0"
input_player7_mouse_index = "0"
input_player8_mouse_index = "0"
input_player9_mouse_index = "0"
mame2003_mouse_device = "mouse"
menu_mouse_enable = "true"
prboom-mouse_on = "disabled"
sgx_mouse_sensitivity = "1.25"

Do you see any mistake ?

Thanks.

@raketenmann I hope to :), but Pi0 is very close to Pi1 of first gen... so it shoulb be 😉

@voljega ... issue solved .. I made 2 actions : Plug-out from RPI3 , the Mayflash adapter for my Atari 2600 Paddle (not working with Recalbox) , and switch USB order of the 2 EG STARTS USB Encoder to assign RETROPAD1 to Player1 and RETROPAD2 to Player2 ... and know HotKey works !

FM

@fmo well obviously you can't use a one button paddle in a system which requires at least 4 to work (I mean Recalbox here)

@zing as Zing said, a dongle maybve necessary to reduce input lag.

also be aware that pairing the ps3 controllers is a little différent than other controllers, you'll find ps3 pairing process on the wiki.

other than that, those are perfect controllers on recalbox.

@Zing I made it!!! 😄
I had to change to FAT32 (it was in NTFS and didn't recognize it) and also create the share folder and now everything is perfect.
Thank you so much for your help and your patience!!

@nickofthedead
https://forum.recalbox.com/topic/9016/a-lire-manettes-n64