@scavy of course the model is SNS-005 American version

@edisson02 I believe that the ideal way is to try to follow the steps that were described in the post I mentioned above, and, post here what you tried to do, as they did in the post quoted, so we can see what you did, maybe someone will give you some idea...

@globz38 I have no way to test this situation, and I haven't found any reports about it, so I recommend that you open an issue on gitlab reporting your problem (as you did here): https://gitlab.com/recalbox/recalbox/-/issues

@acris said in Gamecon SNES not working after 6.1 update:

Hello

soluce by Bkg2k : https://forum.recalbox.com/topic/18829/6-1-et-manettes-gamecon/21

Hi acris, thanks for the quick help.

I followed the instructions of that thread, and now it works as always! 😄

These are the posts that I followed (I used Google translator to help me with the French 🙂 )
@bkg2k said in 6.1 et manettes GAMECON:

For those who want / can test:

Get the recalbox_settings file here: > https://mega.nz/#!zNwXRSoQ!1y50jVuEF7rDZrRSC74zJCe7ZIaLJWiBpNPQJUjj4Oc Mount the partition in writing: mount -o remount,rw / Copy it to /usr/bin . To do this: If you are on linux: scp recalbox_settings root@recalbox.local:/usr/bin/ If you are on Windows, copy it to \\recalbox\share , then connect to SSH, and type:
cp /recalbox/share/recalbox_settings /usr/bin
Restart your recalbox, and the GPIO mapping settings will be taken into account again

@legui said in 6.1 et manettes GAMECON:

Paaarfait !!! 😃
Everything is working now!
I specify for those who will try the manipulation, that it must first:

mount your root partition in writing (attention !!!) back up your old file for security copy the new file provided by @ Bkg2k give the right to this new file reboot the recalbox

I do not specify how to do it, because that will not pose problems to those who know how to do, and will spare those who do not know to make a (big) co ** erie. For those here: be patient, the recalbox team is working hard to provide a fix as soon as possible! 😉
Thank you again @ Bkg2k , do not hesitate if you need more tests!

The right file permissions are set with this command:
chmod 755 /usr/bin/recalbox_settings

@legui merci beaucoup.
Je met a jour mon bartop en debut de semaine prochaine alors je pense que je vais en avoir besoin.

@teko whatever you expect, GPIO can't be shared or you'll face some serious malfunction. 1 GPIO pin should be used for only a single purpose : arcade button, led, reset or power. With the configurable mk_arcade, you must remove as many arcade buttons as "side use" you'd wish.if you want power + reset + led, that's 3 gpio ... 3 less arcade buttons, not sure it's a good idea

Either the update fixed it or removing the spaces helped (strange, because I got it from my old working installation).

Euh oui c'est ce que je voulais faire (métier électricien industriel )

If you want the exact mapping of the N64, you need to edit yourself the buttons and switch to a custom config. What you need is :

edit the files in /recalbox/share/configs/mupen (or mupen64 or mupen64plus, i never remember) add in the recalbox.conf and add at the bottom (or wheverever else) n64.configfile=dummy so that the files you edited won't be overwritten

This will be slightly easier in Recalbox 4.1

@subs So we close this one here with a reference: https://forum.recalbox.com/topic/4091/n64-controller-connected-gpios-4-0-0-beta5-gamecon-driver

@subs

Voici le changelog pour la 1.2 :

Version history

1.2 (27.12.2015)

Optimized PSX driver code