Topics created by Genaker

Happy for you 👍

@genaker there are tutorials, even on our own youtube channel

Yeah, you should try to use RCA cable like here I guess. I think there's a problem of bandwidth : a 800*600 CRT screen have 480k pixel. A pixel use 24 bits of information.
If you want 30 images per second that is 480000 (all pixels) * 24 (bit per pixel) * 30 (images per secodns) = 345 600 000 bits per second aka 345.6 Mbps.
This is meaning you need at least a category 6a copper pair cable.

I'm making assomptions, but if it's just a cheap chineese copper pair, then you will have LOTS of white noise, because of physical stuff I don't want to bother you with.
You would have white noise in the image and in the sound (white noise in image is your classic CRT "snow", and white noise in sound is the sound from that snow screen).
In the image, it's a pixel or another that won't be displayed for 1/30 of a second, you just would notice a bad image stability/quality. But for sound you would hear that very clearly, because it's a 1D signal. This would be "either signal is ?wtf? either it's ok", instead of "just THAT pixel for a 1/30 of a second", in burst.

(sound on top is just about +1Mbps (+192Mops, but I'm really not sure here), this means 6a is still ok. 6a was made for video anyway.)

Check with a RCA (that one), or 2x 6a pair ! 😉

Oh, and honestly, I'd also try to stay with PAL instead of NTSC. It's better for signal/noise, and it seems this is your main problem there.

I checked the default controls and I can go back to the menu using "hotkey+start" in my DS3 pad.

I can do all I need with my DS3 pad.

Thanks for your support.