[4.1-Unstable] Bug reports

[kelv]

On Screen messages during the game are showing squares instead of letters, it seems that the character set is not latin. Another fellow from the forum reports is fixed if you install it from the scratch instead of updating.

[Substring]

So much enthusiasm for bug reports

So, a quick round-up :

• retroarch squares : there is a workaround : just remove ~/configs/retroarch/retroarchcustom.cfg Recalbox will regenerate it with the proper values. People using custom configfiles should add the value manually. Might be solved with a retroarch b*mp, no idea
• can't update with a USB key : yeah, that's a major problem, we're investigating on that
• dreamcast : i've had no problems with it so far, here are the bios hashes i was using :

e10c53c2f8b90bab96ead2d368858623  dc_boot.bin
0a93f7940c455905bea6e392dfde92a4  dc_flash.bin

• manager (and even anything related to the upgrade of the recalbox.conf) : the upgrade process of that file says no update is necessary, which is totally wrong. Should fix that very soon
• no scrape visible : i had the same issue yesterday, couldn't find the origin of the problem, thanks for the workaround @lackyluuk
• C64 : need to b*mp to a SDL2 version rather than this SDL1 version. For people who REALLY want to play: you'd need to kill the vice process, through SSH, then all other launches should work ok. I still haven't figured out how to configure controllers for that emulator yet, help would be appreciated

Thank you for reporting all this, keep hunting bugs

[kelv]

@Substring THX the square issue is gone with the workaround provided

[Substring]

I'll update the 1st post with known issues

[lackyluuk]

@Substring the credits for the solution of the absence of the scrapes goes to @acris
I just added it here to the english thread

[dewen]

PCSX_REARMED can not play Zanac x Zanac --> Zanac Neo, freeze at memory card check.
It is the PCXS_REARMED version problem, old version ( recalbxo 4.0 use it ) can play it.

[treacle]

@Substring Just realized, that I still had my USB BlueTooth dongle plugged in. Removed it and rebooted to try the internal BlueTooth. Now I can't connect my PS3 controller via BlueTooth. Works with the cable though. Oh, and I pressed the little button at the bottom to reset the controller.

Is there anything I need to set in the conf?

[Substring]

@treacle you need to reset your pad as bluez5 manages pairing according to the BT dongle MAC address. So you can't switch from one dongle to another without repairing.

plus your PS3 pad knows its master mac address, so it wouldn't connect to the internal bt

[ferminote]

At the start, when the new start screen is displayed the sound is VERY HIGH, I would say 100%. Once the menu appears, it is adjusted to what we have adjusted.

Also it would be well that the volume of the background music of the menu can be regulated independently to the one of the games, since the music of the menu is higher than the one of the games.

thanks!!!!
sorry for my english

[ferminote]

@ferminote

[url=http://subefotos.com/ver/?95ab49bc1f1591a670fc660332c0b449o.png][img]http://thumbs.subefotos.com/95ab49bc1f1591a670fc660332c0b449o.jpg[/img][/url]

[Substring]

@ferminote your english is fine The fact is that the sound volume is at default at this moment and has not yet been set to what users defined it in ES

[treacle]

@Substring I did reset my pad (pressed the button at the back with a pin). And I selected Delete BlueTooth controller (or what it's called) in the menu in ES. When I then try to add BT controller in the menu, it doesn't find it...

My understanding was that PS3 controllers are automatically added as BT device after pairing via cable, right?

[acris]

Need to edit recalbox.conf to change driver

## Please enable only one of these
# -------------- D1 - PS3 Controllers ------------ #
##Enable PS3 controllers support
controllers.ps3.enabled=1
## Choose an driver between official, shanwan and gasia if you have dualshock clones (official,shanwan,gasia)
controllers.ps3.driver=bluez

[voljega]

@acris just curious but does this mean that from now on (4.1+) every ps3 pad (official, shanwan and gasia included) should use the bluez driver ?

[Substring]

@voljega
original is required for gasia, should also work with genuine
bluez works for shanwan and genuine

[Substring]

@treacle said in [4.1-Unstable] Bug reports:

My understanding was that PS3 controllers are automatically added as BT device after pairing via cable, right?

Yep, DualShock3 don't follow a regular pairing process (whereas DS4 do). You don't pair through ES with DS3

[Juan Carlos Leal Payá]

i cannot find the psp and c64 folder inside the roms folder

[Dwarf]

I wasn't able to configure psp controls, and dreamcast games don't work, i put the cd_boot.bin and dc_flash.bin files in the bios folder, is this it's place?

Also, I was at 4.1 unstable and upgrade an our ago, now the rpi3 won't start, kernel panic.

[Juan Carlos Leal Payá]

@Juan-Carlos-Leal-Payá i created it and works very well

[Substring]

@Dwarf i had no problems updating