Translators

@paradadf Sure, I will thanks

any chance to get an info for this?

Hi all,
First, thank you very much for this really fast bugfix release. So far my GPI case works flawlessly. No problems with the already reported navigation problems (D-Pad).

I came across the question if it would be possible somehow to implement a battery indicator for the GPI case or in general for battery driven recalbox devices.

To be honest I have no idea if this is a impossible idea or could it be an option (for the GPI case at least since). Or if we even miss some hardware on the PCB for this?

Thanks in advance

Hi all,
I would like to share my GPI case mod which I have finished this weekend.
All of the modding ideas came not from my side. All the credits go to this indian guy on Youtube who actually modded his GPI case(s) in a very cool way --> Just search for it on Youtube.

On my side I have decided to change the controls to match the SNES and replace the shoulder buttons to be more practical. Actually the most practical thing is the 4000 mAh LiPo battery / USB charger mod which gives it real added value

I placed the charger in a way that you still can see the charging leds (red = charging, blue = charged) when the cartridge is not plugged. Here some inpiration (Sorry for the bad mechanical work, i have two left hands sometimes ).

Hi @ian57
The command now returns the correct value.

# cut -d, -f2 /sys/class/graphics/fb0/virtual_size
600

Here you can see a "original" recalbox splash video. This one is worse than others (I use two unofficial ones, which fits a little bit better).

@ian57 thanks for the adafruit link
I have changed the config accordingly (commented also things like

 #disable_overscan=1
 #hdmi_drive=2

Now it looks much better, but still the video does not match the video (at least on the sides) exactly. But it is already almost good.

Hi @ian57
When I only add this line, the video plays but it is still too large

The command gives the following result:

cut -d, -f2 /sys/class/graphics/fb0/virtual_size
480

Here is a link to the display I have:
https://www.pi-shop.ch/hdmi-4-pi-7-display-no-touchscreen-1024x600-mit-mini-driver

hi @ian57
I have just tried your suggestions. Unfortunately if I enable all these options I only have sound but the screen stays black. And the sound is very clippering.

thanks in advance

Sorry, I forgot to mention my hardware:

• Board: RPi 3B+

Dear Team,
First of all I want to express my thanks to you for this phenomenal release.
So far, everything important works for my builds! This is not a matter of course. Thumb up, mates!

I just got one point for my 7" display (HDMI 4 Pi: 7" Display no Touchscreen 1024x600 with Mini Driver): All splash videos are displayed too big for the screen. So I always see only the middle part of the video.
After it ended, the screen is displayed correctly (Pac-Man screen, ES loading screen and so on.)
Is there a fix to also show the splash videos correctly? Do I need to adjust them or is there a setting to be changed?

Thank you
lackyluuk