[4.1-Unstable] Bug reports

[lackyluuk]

@Substring the credits for the solution of the absence of the scrapes goes to @acris
I just added it here to the english thread

[dewen]

PCSX_REARMED can not play Zanac x Zanac --> Zanac Neo, freeze at memory card check.
It is the PCXS_REARMED version problem, old version ( recalbxo 4.0 use it ) can play it.

[treacle]

@Substring Just realized, that I still had my USB BlueTooth dongle plugged in. Removed it and rebooted to try the internal BlueTooth. Now I can't connect my PS3 controller via BlueTooth. Works with the cable though. Oh, and I pressed the little button at the bottom to reset the controller.

Is there anything I need to set in the conf?

[Substring]

@treacle you need to reset your pad as bluez5 manages pairing according to the BT dongle MAC address. So you can't switch from one dongle to another without repairing.

plus your PS3 pad knows its master mac address, so it wouldn't connect to the internal bt

[ferminote]

At the start, when the new start screen is displayed the sound is VERY HIGH, I would say 100%. Once the menu appears, it is adjusted to what we have adjusted.

Also it would be well that the volume of the background music of the menu can be regulated independently to the one of the games, since the music of the menu is higher than the one of the games.

thanks!!!!
sorry for my english

[ferminote]

@ferminote

[url=http://subefotos.com/ver/?95ab49bc1f1591a670fc660332c0b449o.png][img]http://thumbs.subefotos.com/95ab49bc1f1591a670fc660332c0b449o.jpg[/img][/url]

[Substring]

@ferminote your english is fine The fact is that the sound volume is at default at this moment and has not yet been set to what users defined it in ES

[treacle]

@Substring I did reset my pad (pressed the button at the back with a pin). And I selected Delete BlueTooth controller (or what it's called) in the menu in ES. When I then try to add BT controller in the menu, it doesn't find it...

My understanding was that PS3 controllers are automatically added as BT device after pairing via cable, right?

[acris]

Need to edit recalbox.conf to change driver

## Please enable only one of these
# -------------- D1 - PS3 Controllers ------------ #
##Enable PS3 controllers support
controllers.ps3.enabled=1
## Choose an driver between official, shanwan and gasia if you have dualshock clones (official,shanwan,gasia)
controllers.ps3.driver=bluez

[voljega]

@acris just curious but does this mean that from now on (4.1+) every ps3 pad (official, shanwan and gasia included) should use the bluez driver ?

[Substring]

@voljega
original is required for gasia, should also work with genuine
bluez works for shanwan and genuine

[Substring]

@treacle said in [4.1-Unstable] Bug reports:

My understanding was that PS3 controllers are automatically added as BT device after pairing via cable, right?

Yep, DualShock3 don't follow a regular pairing process (whereas DS4 do). You don't pair through ES with DS3

[Juan Carlos Leal Payá]

i cannot find the psp and c64 folder inside the roms folder

[Dwarf]

I wasn't able to configure psp controls, and dreamcast games don't work, i put the cd_boot.bin and dc_flash.bin files in the bios folder, is this it's place?

Also, I was at 4.1 unstable and upgrade an our ago, now the rpi3 won't start, kernel panic.

[Juan Carlos Leal Payá]

@Juan-Carlos-Leal-Payá i created it and works very well

[Substring]

@Dwarf i had no problems updating

[Mercvtio]

I'm having trouble with Dreamcast games. They launch allright and run smoothly, but I can't save (not enough blocks, whatever the game) and whenever I hit the hotkey, Reicast crashes and sends me back to EmulationStation. Can anyone save ?

I put the bios matching the OP md5 in the Bios folder, but it changes nothing.
I'm a bit lost.

[voljega]

@Mercvtio reicast doesn't seem to be a retroarch nor libretro core so what you describe is perfectly normal

[Mercvtio]

@voljega OK, so that's the normal behavior. Thanks !

Any idea about my saving issue, anyone ?

[Mercvtio]

Never mind, I just had to format the VMU by launching a game and soft resetting (A+B+X+Y+Start). Everything perfect now!