[4.1-stable] FAQ
-
@plootje Dreamcast is not supported on a RPi 2. You need at least a RPi 3. Please check the system compatibility list:
https://github.com/recalbox/recalbox-os/wiki/Board-Compatibility-(EN) -
@dh04000 I don't think 4.0.2 is still distributed over OTA. It's highly recommended to do a clean install of 4.1
-
@lackyluuk if i change the rpi2 tp rpi3 do inhave to install everyting again ?
-
@plootje Yes, because it installs a different OS version for each supported hardware, i think. You cannot just switch the SD card.
If I am wrong please correct me -
@plootje the real idea would be to use the scripts inside recalbox to save your user data on a USB key, install recalbox for Pi3 to a new SD, and then plug this key and leave it on your Recalbox.
-
-
Hello all! I've got problem after updating system. I upgraded the RecallBox 4.0.1 to 4.1 operating system and now it is very slow also on main menu. And I see 100% 4th core loading. What I did wrong? PS: I'm using CRT TV and on 4.0.1 version I've played perfect.
-
@ledrunning Hi i have the same problem. in HDMI works perfect in crt tv i have bad sound quality and bad performance. In 4.0.2 it works great. Try update and new install, the result is the same.
Pd: sorry for my english. -
@ledrunning I have the same problem
-
@ledrunning said in [4.1-stable] FAQ:
Maybe Rpi 2 doesn't support on this version?
-
Many people seem to have slowdowns with CRT, i'll have a look once I have time (but i didn't have any when I tested ...)
-
It would be great!!!
-
@ledrunning Tell me one thing : anything running on GPIO ?
-
@substring nothing...
And this is my conf...
disable_overscan=0
sdtv_mode=2
hdmi_group=1
hdmi_mode=16gpu_mem_256=128
gpu_mem_512=256
gpu_mem_1024=512
#hdmi_force_hotplug=1
temp_limit=65
kernel=zImage
disable_overscan=0
overscan_scale=1#Здесь также ничего не трогаем!
arm_freq=1050
core_freq=250
sdram_freq=450
force_turbo=0
over_voltage=6
over_voltage_sdram=0
gpu_freq=250 -
@ledrunning please provide me a support archive
-
@substring said in [4.1-stable] FAQ:
please provide me a support archive
Sorry, what do you mean? Is these some logs? Where can I find it?
-
-
@ledrunning for some people, deactivating
audio-pwm-mode=2
in/boot/config.txt
did the trick -
Hello every body!!! Congratulations for the 4.1!! You are awesome!! Thanks!!
I need you help because i want to connect my bluetooth controllers ( two gamesir G3S and a chinese controllers) but i doesn't work...
Before the 4.1, i used a dongle for connect the G3S and a cable for the chinese but now i want to use the internal bluetooth.
I have forget the connection with all my controller in the system and when i scan for connect them i have the controller but if i choose them i have "impossible to connect".... i have reset the controller but it isn't change anything... sometime it work it but it reconize the controller on keybord and i can configure just the power switch...Nobody can help me?
(I'm sorry for my bad english )Thanks.
Config : raspberry pi 3 + card SD 16Go simple boot with stockage anyexternal.
-
@caramasof have a look at https://github.com/recalbox/recalbox-os/wiki/Connect-bluetooth-controller-manually-(EN)#if-your-recalbox-version-is-41x-or-later if you're ddesperate ...
are you sure you resettted your pads ?