[4.1-stable] FAQ

[jeevuz]

@ledrunning Hi i have the same problem. in HDMI works perfect in crt tv i have bad sound quality and bad performance. In 4.0.2 it works great. Try update and new install, the result is the same.
Pd: sorry for my english.

[Edvis]

@ledrunning I have the same problem

[Ledrunning]

@ledrunning said in [4.1-stable] FAQ:

Maybe Rpi 2 doesn't support on this version?

[Substring]

Many people seem to have slowdowns with CRT, i'll have a look once I have time (but i didn't have any when I tested ...)

[Ledrunning]

It would be great!!!

[Substring]

@ledrunning Tell me one thing : anything running on GPIO ?

[Ledrunning]

@substring nothing...
And this is my conf...
disable_overscan=0
sdtv_mode=2
hdmi_group=1
hdmi_mode=16

gpu_mem_256=128
gpu_mem_512=256
gpu_mem_1024=512
#hdmi_force_hotplug=1
temp_limit=65
kernel=zImage
disable_overscan=0
overscan_scale=1

#Здесь также ничего не трогаем!
arm_freq=1050
core_freq=250
sdram_freq=450
force_turbo=0
over_voltage=6
over_voltage_sdram=0
gpu_freq=250

[Substring]

@ledrunning please provide me a support archive

[Ledrunning]

@substring said in [4.1-stable] FAQ:

please provide me a support archive

Sorry, what do you mean? Is these some logs? Where can I find it?

[lackyluuk]

@Ledrunning This:
https://github.com/recalbox/recalbox-os/wiki/Recalbox-support-(EN)

[Substring]

@ledrunning for some people, deactivating audio-pwm-mode=2 in /boot/config.txt did the trick

[Caramasof]

Hello every body!!! Congratulations for the 4.1!! You are awesome!! Thanks!!

I need you help because i want to connect my bluetooth controllers ( two gamesir G3S and a chinese controllers) but i doesn't work...
Before the 4.1, i used a dongle for connect the G3S and a cable for the chinese but now i want to use the internal bluetooth.
I have forget the connection with all my controller in the system and when i scan for connect them i have the controller but if i choose them i have "impossible to connect".... i have reset the controller but it isn't change anything... sometime it work it but it reconize the controller on keybord and i can configure just the power switch...

Nobody can help me?
(I'm sorry for my bad english )

Thanks.

Config : raspberry pi 3 + card SD 16Go simple boot with stockage anyexternal.

[Substring]

@caramasof have a look at https://github.com/recalbox/recalbox-os/wiki/Connect-bluetooth-controller-manually-(EN)#if-your-recalbox-version-is-41x-or-later if you're ddesperate ...

are you sure you resettted your pads ?

[Caramasof]

@substring
Thanks for your help, yes i have reset my controller and i have test with all his configuration (mode apple, android, android + mouse and PC/PS3) but all mode have the same results....
I will test your link and i will be back if work it.
Thanks

[Ledrunning]

@substring said in [4.1-stable] FAQ:

for some people, deactivating audio-pwm-mode=2 in /boot/config.txt did the trick

Ok I will try on evening

[Caramasof]

@substring said in [4.1-stable] FAQ:

https://github.com/recalbox/recalbox-os/wiki/Connect-bluetooth-controller-manually-(EN)#if-your-recalbox-version-is-41x-or-later

So, i've test this procedure but i obtain this :

[bluetooth]# pair 85:55:06:78:6F:30
Attempting to pair with 85:55:06:78:6F:30
Failed to pair: org.bluez.Error.InProgress
[bluetooth]# connect 85:55:06:78:6F:30
Attempting to connect to 85:55:06:78:6F:30
Failed to connect: org.bluez.Error.Failed
[bluetooth]# trust 85:55:06:78:6F:30
Changing 85:55:06:78:6F:30 trust succeeded

When i boot without my USB, with lot of tests i have connect one controller but when i restart with my USB the controller don't work and i can't reconnect it...

A idea?
On Recalbox Manager/ Controllers i have change the plugin PS3 on "Original" and i think it's better but if i save, it return to "Bluez 5"...

I am sure it's possible ^^
Thanks for your help.

[Substring]

@caramasof manually edit the recalbox.conf for the PS3 driver, it works. At least it should. But for now, on every update, it will be reset to bluez.

Which controller did you try to pair with bluetoothctl ? not a PS3 i hope ?

[Caramasof]

@substring said in [4.1-stable] FAQ:

caramasof manually edit the recalbox.conf for the PS3 driver, it works. At least it should. But for now, on every update, it will be reset to bluez.

No i have try with a Gamesir G3S (https://www.amazon.fr/GameSir-G3s-Bluetooth-Compatible-Smartphone/dp/B019PXVCDQ/ref=sr_1_1?ie=UTF8&qid=1508243170&sr=8-1&keywords=gamesir+g3s)
She have a PS3 mode or other type of connection. Before with the dongle i use the PC mode for connect them (the recalbox call him "Xbox 360 pad").

What i edit on recalbox.conf? And i have see a second recalbox.conf with the 4.1 what it's different?

[Substring]

@caramasof I told you about the ps3 driver, and manually set it to bluez. I don't remember the exact key, probably controllers.ps3.driver.

But on which mode can your gamesir work ? PS3 ? PC ? On PS3, I'm not sure the pairing process would be like a regular PS3. Does your pad come with a dongle ?

[Caramasof]

@substring I have succeeded!!! So i think i have had a bug because i have try and try and try... and it's work!!

When i look the config, it's set on bluez so i don't change and i retry with all mode of the manette every time.
So if anybody it's interessed for Gamesir G3S pad, power it with "B" + "Home" and select the bluez mode for PS3 controllers.

Thanks for your help @Substring you are awesome!