[4.1-stable] FAQ

[Substring]

@plootje the real idea would be to use the scripts inside recalbox to save your user data on a USB key, install recalbox for Pi3 to a new SD, and then plug this key and leave it on your Recalbox.

[rockaddicted]

@plootje https://github.com/recalbox/recalbox-os/wiki/Use-an-external-usb-storage-device-on-recalbox-(EN)#optional--sync-your-usb-key-with-your-sd

[Ledrunning]

Hello all! I've got problem after updating system. I upgraded the RecallBox 4.0.1 to 4.1 operating system and now it is very slow also on main menu. And I see 100% 4th core loading. What I did wrong? PS: I'm using CRT TV and on 4.0.1 version I've played perfect.

[jeevuz]

@ledrunning Hi i have the same problem. in HDMI works perfect in crt tv i have bad sound quality and bad performance. In 4.0.2 it works great. Try update and new install, the result is the same.
Pd: sorry for my english.

[Edvis]

@ledrunning I have the same problem

[Ledrunning]

@ledrunning said in [4.1-stable] FAQ:

Maybe Rpi 2 doesn't support on this version?

[Substring]

Many people seem to have slowdowns with CRT, i'll have a look once I have time (but i didn't have any when I tested ...)

[Ledrunning]

It would be great!!!

[Substring]

@ledrunning Tell me one thing : anything running on GPIO ?

[Ledrunning]

@substring nothing...
And this is my conf...
disable_overscan=0
sdtv_mode=2
hdmi_group=1
hdmi_mode=16

gpu_mem_256=128
gpu_mem_512=256
gpu_mem_1024=512
#hdmi_force_hotplug=1
temp_limit=65
kernel=zImage
disable_overscan=0
overscan_scale=1

#Здесь также ничего не трогаем!
arm_freq=1050
core_freq=250
sdram_freq=450
force_turbo=0
over_voltage=6
over_voltage_sdram=0
gpu_freq=250

[Substring]

@ledrunning please provide me a support archive

[Ledrunning]

@substring said in [4.1-stable] FAQ:

please provide me a support archive

Sorry, what do you mean? Is these some logs? Where can I find it?

[lackyluuk]

@Ledrunning This:
https://github.com/recalbox/recalbox-os/wiki/Recalbox-support-(EN)

[Substring]

@ledrunning for some people, deactivating audio-pwm-mode=2 in /boot/config.txt did the trick

[Caramasof]

Hello every body!!! Congratulations for the 4.1!! You are awesome!! Thanks!!

I need you help because i want to connect my bluetooth controllers ( two gamesir G3S and a chinese controllers) but i doesn't work...
Before the 4.1, i used a dongle for connect the G3S and a cable for the chinese but now i want to use the internal bluetooth.
I have forget the connection with all my controller in the system and when i scan for connect them i have the controller but if i choose them i have "impossible to connect".... i have reset the controller but it isn't change anything... sometime it work it but it reconize the controller on keybord and i can configure just the power switch...

Nobody can help me?
(I'm sorry for my bad english )

Thanks.

Config : raspberry pi 3 + card SD 16Go simple boot with stockage anyexternal.

[Substring]

@caramasof have a look at https://github.com/recalbox/recalbox-os/wiki/Connect-bluetooth-controller-manually-(EN)#if-your-recalbox-version-is-41x-or-later if you're ddesperate ...

are you sure you resettted your pads ?

[Caramasof]

@substring
Thanks for your help, yes i have reset my controller and i have test with all his configuration (mode apple, android, android + mouse and PC/PS3) but all mode have the same results....
I will test your link and i will be back if work it.
Thanks

[Ledrunning]

@substring said in [4.1-stable] FAQ:

for some people, deactivating audio-pwm-mode=2 in /boot/config.txt did the trick

Ok I will try on evening

[Caramasof]

@substring said in [4.1-stable] FAQ:

https://github.com/recalbox/recalbox-os/wiki/Connect-bluetooth-controller-manually-(EN)#if-your-recalbox-version-is-41x-or-later

So, i've test this procedure but i obtain this :

[bluetooth]# pair 85:55:06:78:6F:30
Attempting to pair with 85:55:06:78:6F:30
Failed to pair: org.bluez.Error.InProgress
[bluetooth]# connect 85:55:06:78:6F:30
Attempting to connect to 85:55:06:78:6F:30
Failed to connect: org.bluez.Error.Failed
[bluetooth]# trust 85:55:06:78:6F:30
Changing 85:55:06:78:6F:30 trust succeeded

When i boot without my USB, with lot of tests i have connect one controller but when i restart with my USB the controller don't work and i can't reconnect it...

A idea?
On Recalbox Manager/ Controllers i have change the plugin PS3 on "Original" and i think it's better but if i save, it return to "Bluez 5"...

I am sure it's possible ^^
Thanks for your help.

[Substring]

@caramasof manually edit the recalbox.conf for the PS3 driver, it works. At least it should. But for now, on every update, it will be reset to bluez.

Which controller did you try to pair with bluetoothctl ? not a PS3 i hope ?