[4.1-stable] FAQ

[dh04000]

I installed 4.0.0 a couple of months ago while the update server was done. Is it possible to upgrade to 4.0.1 or 4.0.2. so I can then update to 4.1.0?

Also, on the Drastic topic, the author recently said that he's considering releasing an opensource-ish licensed version for use on only the raspberry pi. Even if he doesn't, would it be possible for some sort of script to download, install, and setup Drastic, and thus push the legal responsibility of disturbing Drastic away from Recalbox onto the user?

[lackyluuk]

@plootje Dreamcast is not supported on a RPi 2. You need at least a RPi 3. Please check the system compatibility list:
https://github.com/recalbox/recalbox-os/wiki/Board-Compatibility-(EN)

[lackyluuk]

@dh04000 I don't think 4.0.2 is still distributed over OTA. It's highly recommended to do a clean install of 4.1

[plootje]

@lackyluuk if i change the rpi2 tp rpi3 do inhave to install everyting again ?

[lackyluuk]

@plootje Yes, because it installs a different OS version for each supported hardware, i think. You cannot just switch the SD card.
If I am wrong please correct me

[Substring]

@plootje the real idea would be to use the scripts inside recalbox to save your user data on a USB key, install recalbox for Pi3 to a new SD, and then plug this key and leave it on your Recalbox.

[rockaddicted]

@plootje https://github.com/recalbox/recalbox-os/wiki/Use-an-external-usb-storage-device-on-recalbox-(EN)#optional--sync-your-usb-key-with-your-sd

[Ledrunning]

Hello all! I've got problem after updating system. I upgraded the RecallBox 4.0.1 to 4.1 operating system and now it is very slow also on main menu. And I see 100% 4th core loading. What I did wrong? PS: I'm using CRT TV and on 4.0.1 version I've played perfect.

[jeevuz]

@ledrunning Hi i have the same problem. in HDMI works perfect in crt tv i have bad sound quality and bad performance. In 4.0.2 it works great. Try update and new install, the result is the same.
Pd: sorry for my english.

[Edvis]

@ledrunning I have the same problem

[Ledrunning]

@ledrunning said in [4.1-stable] FAQ:

Maybe Rpi 2 doesn't support on this version?

[Substring]

Many people seem to have slowdowns with CRT, i'll have a look once I have time (but i didn't have any when I tested ...)

[Ledrunning]

It would be great!!!

[Substring]

@ledrunning Tell me one thing : anything running on GPIO ?

[Ledrunning]

@substring nothing...
And this is my conf...
disable_overscan=0
sdtv_mode=2
hdmi_group=1
hdmi_mode=16

gpu_mem_256=128
gpu_mem_512=256
gpu_mem_1024=512
#hdmi_force_hotplug=1
temp_limit=65
kernel=zImage
disable_overscan=0
overscan_scale=1

#Здесь также ничего не трогаем!
arm_freq=1050
core_freq=250
sdram_freq=450
force_turbo=0
over_voltage=6
over_voltage_sdram=0
gpu_freq=250

[Substring]

@ledrunning please provide me a support archive

[Ledrunning]

@substring said in [4.1-stable] FAQ:

please provide me a support archive

Sorry, what do you mean? Is these some logs? Where can I find it?

[lackyluuk]

@Ledrunning This:
https://github.com/recalbox/recalbox-os/wiki/Recalbox-support-(EN)

[Substring]

@ledrunning for some people, deactivating audio-pwm-mode=2 in /boot/config.txt did the trick

[Caramasof]

Hello every body!!! Congratulations for the 4.1!! You are awesome!! Thanks!!

I need you help because i want to connect my bluetooth controllers ( two gamesir G3S and a chinese controllers) but i doesn't work...
Before the 4.1, i used a dongle for connect the G3S and a cable for the chinese but now i want to use the internal bluetooth.
I have forget the connection with all my controller in the system and when i scan for connect them i have the controller but if i choose them i have "impossible to connect".... i have reset the controller but it isn't change anything... sometime it work it but it reconize the controller on keybord and i can configure just the power switch...

Nobody can help me?
(I'm sorry for my bad english )

Thanks.

Config : raspberry pi 3 + card SD 16Go simple boot with stockage anyexternal.