No more sound after installing v. 4.1 in recalbox
-
merci!
mais je n'ai toujours pas de son... -
@benj008 donne moi la ref exacte de ton hifiberry stp + archive de support en allant sur http://recalbox/help
-
c'est un hifiberry DAC+ standard RCA (n° modele 4260439550057)
voici pour le lien:
https://file.ac/H7idCNRf1ZE/ -
@benj008 @Substring
I will test it tonight since I didn't have the chance yet to try 4.1.
I'll give a feedback then -
@lackyluuk ok thank you very much ! hope i don't bother you too much...
-
@benj008 Not at all. Actually I cannot wait any longer to try it out because I was away the whole weekend and couldnt install it. Lol
-
@substring je ne sais pas si mon dernier message est passé desolé...le voici
c'est un hifiberry DAC+ standard RCA (n° modele 4260439550057)
voici pour le lien:
https://file.ac/H7idCNRf1ZE/ -
I have also the issue with my hifiberry DAC+ not working with 4.1 stable.
Just for history, I was having the same problem with 4.1 unstable from april and switched back to 4.1 unstable from march, where the sound was working. Issue that I didnt followed. So it seems to me that something important changed between this 2 versions that was important for the DAC story.
What I changed so far on 4.1 stable (just today jumped in )/boot/config.sys comment out #dtparam=audio=on and put missing section # uncomment for hifiberry dtoverlay=hifiberry-dacplus /etc/asound.conf create pcm.!default { type hw card 0 } ctl.!default { type hw card 0 } etc/modules.conf comment out # snd_bcm2835 uinput usbhid
for the moment, silence is golden.....
-
There is a very simple way to find out if the hifiberry-dacplus card is adressed.
On the board is a green led, when the card is in contact with a driver, it is lit. When it has no connection with software, is dark.
I changed again the cards and on 4.1 stable, led is not on. With my unstable from march, led and sound. -
@dragu so is it possible to get back and reinstall 4.1 from march? maybe it's one of the solutions for my issue
-
@benj008
I think, they should have a chance to look into this.
I have the system on another card, so easy for me to change, till they find a solution.
But if you have no image anymore from build 11603320, I have no idea. -
@dragu thanks, i was careless, i didn't have a backup of previous 4.0.1
-
@benj008
build 11603320 is an 4.1 unstable version, that I use (for me very stable, never had a problem).
I have still the image, but if I link it here, I will be in death row. -
I have just installed 4.1 and my HifiBerry DAC+ is not working at all. In the settings I can only choose between AUTO, JACK and HDMI.
The dtoverlay in /boot/conig.txt is still dtoverlay=hifiberry-dacplus and the green LED on the card is on.
But somehow in alsamixer the card is not showing up. The only soundcard is the internal.With
cat /proc/asound/cards
i get the following:0 [ALSA ]: bcm2835 - bcm2835 ALSA bcm2835 ALSA
If I remove this driver I cannot access
alsa
oramixer anymore
Still try to figure out some other ways to check the soundcard implementation...
-
same for me..
-
In build 15156473 the problem was appearing for me.
-
@benj008 @lackyluuk @Dragu The only things that changed regarding sound are how the volumes are set/forced at boot, so I have an idea where to look BUT as I can't test by myself, I need you guyz.
So first remount / as read-write :mount -o remount, rw /
then edit/recalbox/scripts/recalbox-configure.sh
and comment line 409 by adding a#
at the start of it and report back If it worked, remove the#
, and set the volume to 100% in ES, reboot and report back. -
@substring salut
Tipping /recalbox/scripts/recalbox-configure.sh path in putty seems to bring me to an empty file -
@Substring I will test it tonight when I am home. Thanks for the approach!
-
@Substring
You sleep sometimes ?
The file name is in my installation recalbox-config.sh, I think you mean the same.
I made the comment out, it had no effect. I also changed in ES the sound to 100%. But the animal put it back directly to 0%, no way.I have some other issues with 4.1s, dont want to kill you.