No more sound after installing v. 4.1 in recalbox

[Substring]

@benj008 oui oui
Donc : hifiberry, il faut editer /boot/config.txt

[benj008]

@substring j'ai fait, j'ai vu que l'overlay etait deja dedans qd je scroll vers le bas je l'avais fait dans ma config initiale je pense
apres je fais la manip avec /etc/asound.conf et la j'ai ca
pcm.!default {^M
type hw card 0^M
}^M
ctl.!default {^M
type hw card 0^M
}

Les ^M c'est normal?

[Substring]

@benj008 non, ca sent le fichier édité sous windows ca, pas beau. Tu as vu où cette manip ? aucune raison de la faire ...

[benj008]

dans le forum paragraphe Device tree and config apres l'overlay

[Substring]

@benj008 vire moi ce fichier pour commencer

[benj008]

tu fais comment? j'ai pas trop l'habitude sorry

[Substring]

@benj008 ah ok

mount -o remount, rw /
rm /etc/asound.conf

Ensuite tu rebootes et tu me dis

[benj008]

merci!
mais je n'ai toujours pas de son...

[Substring]

@benj008 donne moi la ref exacte de ton hifiberry stp + archive de support en allant sur http://recalbox/help

[benj008]

c'est un hifiberry DAC+ standard RCA (n° modele 4260439550057)

voici pour le lien:
https://file.ac/H7idCNRf1ZE/

[lackyluuk]

@benj008 @Substring
I will test it tonight since I didn't have the chance yet to try 4.1.
I'll give a feedback then

[benj008]

@lackyluuk ok thank you very much ! hope i don't bother you too much...

[lackyluuk]

@benj008 Not at all. Actually I cannot wait any longer to try it out because I was away the whole weekend and couldnt install it. Lol

[benj008]

@substring je ne sais pas si mon dernier message est passé desolé...le voici

c'est un hifiberry DAC+ standard RCA (n° modele 4260439550057)

voici pour le lien:
https://file.ac/H7idCNRf1ZE/

[Dragu]

@benj008
@lackyluuk

I have also the issue with my hifiberry DAC+ not working with 4.1 stable.
Just for history, I was having the same problem with 4.1 unstable from april and switched back to 4.1 unstable from march, where the sound was working. Issue that I didnt followed. So it seems to me that something important changed between this 2 versions that was important for the DAC story.
What I changed so far on 4.1 stable (just today jumped in )

/boot/config.sys
comment out
#dtparam=audio=on

and put missing section

# uncomment for hifiberry
dtoverlay=hifiberry-dacplus

/etc/asound.conf create

pcm.!default {
type hw card 0
}
ctl.!default {
type hw card 0
}

etc/modules.conf
comment out

# snd_bcm2835
uinput
usbhid

for the moment, silence is golden.....

[Dragu]

There is a very simple way to find out if the hifiberry-dacplus card is adressed.
On the board is a green led, when the card is in contact with a driver, it is lit. When it has no connection with software, is dark.
I changed again the cards and on 4.1 stable, led is not on. With my unstable from march, led and sound.

[benj008]

@dragu so is it possible to get back and reinstall 4.1 from march? maybe it's one of the solutions for my issue

[Dragu]

@benj008
I think, they should have a chance to look into this.
I have the system on another card, so easy for me to change, till they find a solution.
But if you have no image anymore from build 11603320, I have no idea.

[benj008]

@dragu thanks, i was careless, i didn't have a backup of previous 4.0.1

[Dragu]

@benj008
build 11603320 is an 4.1 unstable version, that I use (for me very stable, never had a problem).
I have still the image, but if I link it here, I will be in death row.