ScummVM controls in GPI Case

[Juan Daniel]

Hi,

is there a way to configure ScummVM to use the GPI Case buttons as a mouse? I tested Monkey Island and seems starts fine, but the pointer doesn´t work with the pad.

Kind regards.

[paradadf]

@juan-daniel please wait for the next release. It should work then.

[Juan Daniel]

Thanks @paradadf ! I will wait

[ajeoae]

@juan-daniel Here's how I got it to work with the D-Pad. There is a hidden feature on the GPi which allows you to change the D-Pad mode. So here are the steps:

• Go into the emulationstation menu to configure your controller
• Map Up, Down, Left, Right like normal, and your regular buttons. Most importantly also map Select and Start (this will allow you to do the mode change)
• Now move up to Joystick1 using your D-Pad and hold down Start and Left for about 5-10 seconds, you'll see the power LED flash purple briefly. You can now map Joystick1 (skip Joystick2).

To change the D-Pad back to its default mode, hold down Start and Up. Also if you're on an older GPi model use Select instead of Start.

The only other thing I did was add joystick_num=0 to the scummvm.ini file but I'm not sure if that is necessary.

Hope that helps!

[krnr]

I simply replaced the controllersConfig.py from the upcoming 6.1.1 version:

https://gitlab.com/recalbox/recalbox-configgen/raw/master/configgen/controllersConfig.py?inline=false

That solved the problem for me.

[Nicolas Jacquemin]

@krnr Yes, i confirm the problem in 6.1.1 with GPI Case.
You need to replace this file at /usr/lib/python2.7/site-packages/configgen/

[fleafunk]

@krnr this file did not work for me, the game always crash, I made a modify and now it works for me in the GPi Case with Recalbox 6.1.1 and also works in Recalbox 6.0 with the SUPERPi CASE.

Here is the link: https://www.mediafire.com/folder/6rvp64hivvkc9/

just replace at /usr/lib/python2.7/site-packages/configgen/