Hi,

I can't play any Daphne game in GPI Case. The game loads until the "insert coin" screen, but after that I only hear sounds and the screen is frozen.

Is it a performance limitation in RP0? The same games in RP3 work fine.

Kind regards.

Thanks @paradadf ! I will wait

Hi,

I have the same problem. The first time I could start the PSX game a few seconds. It worked a bit slow, but it was expected because is a RP0.

After that the game crashed, and I can´t start it again. Recalbox is blocked as @Articanos shows.

Kind regards.

Hi,

is there a way to configure ScummVM to use the GPI Case buttons as a mouse? I tested Monkey Island and seems starts fine, but the pointer doesn´t work with the pad.

Kind regards.

@substring No, I downloaded the ISO from Recalbox website a long time ago (before than version 4.0), and I have been updated until now.

If it will take you a lot of time, I can download a clean version from the website and set the games and savegames, it´s not a problem.

Thank you and kind regards.

@substring Yes, of course. Thanks!

Support file

Hi @substring,

upgrade.out.log

Tue Jan 1 01:00:02 UTC 1980
Upgrading /boot
Tue Jan 1 01:00:03 UTC 1980
Tue Jan 1 01:00:03 UTC 1980
Upgrading /

upgrade.err.log

mount: mounting /dev/root on / failed: Invalid argument

Good afternoon,

I can´t update either. When the download ends, Recalbox starts to reboot, the progress bar appears only for a second. After that Recablox reboots again and it starts normally. A popup appears again to say me that there is an update available.

I see this in the log:

[ 421.35] ------------ Will process to the recalbox upgrade from https://lb-archive-prod.recalbox.com ------------
[ 421.37] Need 261432375
[ 421.40] Needed size for upgrade : 255305kb
[ 421.42] Will download 255305kb of files in /recalbox/share/system/upgrade where 18608772kb is available. Free disk space after operation : 18353467kb
[ 421.44] https://lb-archive-prod.recalbox.com/v1/upgrade/rpi3/boot.tar.xz downloaded
[ 421.47] https://lb-archive-prod.recalbox.com/v1/upgrade/rpi3/root.tar.xz downloaded
[ 421.50] https://lb-archive-prod.recalbox.com/v1/upgrade/rpi3/boot.tar.xz.sha1 downloaded
[ 421.52] https://lb-archive-prod.recalbox.com/v1/upgrade/rpi3/root.tar.xz.sha1 downloaded
[ 421.55] https://lb-archive-prod.recalbox.com/v1/upgrade/rpi3/root.list downloaded
[ 421.58] boot.tar.xz checksum verified
[ 421.60] root.tar.xz checksum verified
[ 421.63] All files downloaded and checked, ready for upgrade on next reboot
[ 425.72] Stopping S94manager
[ 426.04] Stopping S92switch
[ 426.06] script /recalbox/scripts/powerswitch.sh already stopped !
[ 426.98] Stopping Emulationstation
[ 427.06] Saving ALSA mixers configuration
[ 427.38] Stopping S13fbcp
[ 428.03] recalbox.conf saved to /boot partition
[ 1.63] Let's play the video for 20 seconds
[ 3.21] /boot/recalbox-backup.conf not found
[ 5.07] Restoring sound config before reboot
[ 5.13] Upgrading RA Core names
[ 12.83] Stopping S94manager
[ 13.06] Stopping S92switch
[ 13.07] script /recalbox/scripts/powerswitch.sh already stopped !
[ 13.70] Stopping Emulationstation
[ 13.77] Saving ALSA mixers configuration
[ 14.05] Stopping S13fbcp
[ 14.59] recalbox.conf saved to /boot partition
[ 1.63] Let's play the video for 20 seconds
[ 3.07] /boot/recalbox-backup.conf not found
[ 3.84] No need to upgrade configuration files
[ 4.23] Will not start S13fbcp : system.fbcp.enabled is set to 0
[ 4.58] starting new log
[ 4.60] converting dos to unix carriage return characters
[ 4.99] setting hostname to RECALBOX
[ 5.13] setting audio volume to 26
[ 5.14] setting timezone to Europe/Madrid
[ 5.17] updated wifi settings : ssid=
[ 5.27] ---- recalbox-config.sh ----
[ 5.32] setting audio volume : 26
[ 5.33] setting keyboard layout to es
[ 5.34] updated wifi settings : ssid=
[ 5.49] Simple mixer control 'PCM',0
[ 5.50] Capabilities: pvolume pvolume-joined pswitch pswitch-joined
[ 5.50] updated wifi settings : ssid=Mi~FibraC04B
[ 5.51] Setting volume for numid=3
[ 5.52] Playback channels: Mono
[ 5.53] Limits: Playback -10239 - 400
[ 5.54] Setting volume for numid=2
[ 5.55] Mono: Playback 0 [96%] [0.00dB] [on]
[ 5.57] Setting volume for numid=1
[ 5.59] Setting volume for numid=5
[ 5.62] amixer: Control default element write error: Operation not permitted
[ 5.62] Setting volume for numid=4
[ 5.63]
[ 5.65] Restoring ALSA mixers configuration
[ 5.81] setting audio to hdmi
[ 5.84] ---- recalbox-config.sh ----
[ 5.87] setting audio output mode : hdmi
[ 5.89] numid=3,iface=MIXER,name='PCM Playback Route'
[ 5.90] ; type=INTEGER,access=rw------,values=1,min=0,max=2,step=0
[ 5.92] : values=2
[ 6.33] starting emulationstation with lang = es_ES
[ 7.27] ---- recalbox-config.sh ----
[ 10.51] Starting S92switch
[ 10.54] script /recalbox/scripts/powerswitch.sh [ STARTED ]
[ 11.66] Starting S94manager
[ 11.82] ... Starting manager v2
[ 12.07] Will not start pm2 : system.api.enabled is set to 0
[ 14.22] starting xarcade2jstick
[ 14.57] xarcade2jstick : no official stick found, looking for keyboard encoder now ...

Kind regards and thanks for Recalbox.