ROMNI - My 3D Printed New tiny RecalboxArcade :)

[ian57]

I love it. Great job

[Marcelo Souza]

@voljega said in ROMNI - My 3D Printed New tiny RecalboxArcade :

le for the joystick would be better ? It seems to stick out a little too much compare to the size of the bartop

Yes. Certainly !
I ´ve mentioned that the shaft will be replaced by a shorter one. This one was used just because it´s the only one i had at the time i´ve built it. It´s 7cm long, but i don´t have all this space inside the case, so, i rebuild all the internal parts of the original sanwa with 3D Print, to reduce the size, and leverage the shaft by 1cm (this red ring on it´s base)... Using a shorter shaft, like 6cm i will be able to remove that red ring, so the shaft will be lower.
But anyway, it´s working perfectly and not getting in the way of the screen. So it works for now.

[Marcelo Souza]

@ian57

@ian57 said in ROMNI - My 3D Printed New tiny RecalboxArcade :

I love it. Great job

Thks Ian ! I love it too. Lol. Playing it everyday !

[Marcelo Souza]

@acris said in ROMNI - My 3D Printed New tiny RecalboxArcade :

Hello

good projet , screen too small for me,
recalbox 4.1 https://archive.recalbox.com/updates/v1.0/unstable/

Thx Acris !
I am waiting for the stable one. But but maybe i will test the unstable for curiosity sake. lol.

I agree that  the screen is not for everyone. But it´s a design/cost option. It´s very hard to find bigger screens, not SO big to have to change the entire design/power scheme, that has composite input and it´s cheap. That screen i am using is around $25... And i live in Brazil, so it´s not easy to get anything i want to + the import taxes can be like 100% the price + shipping... So, the decition has a lot of constraints. But it´s a nice screen for it´s price, and it´s bigger than my dingoo a320 screen. If i am able to find a good Cost Vs enefit on a 5 inch screen that would be perfect. And as it´s a 3D printed case designed by me it´s just a matter of modifying the 3D model and printing the top part again. 


 BTW...Any clue about my Composite/HDMI question ? Is it possible to auto-switch to hdmi output when a HDMI cable is present ? (Even if i need to reboot it) ? 
 BTW 2 : I don´t know why my posts here are being showed on a black box... :(

[Marcelo Souza]

More Pics ! BTW this project is not 100% finished on it´s design. It´s the Prototype #6 (6 case printed until now). So there´s some minor updates/differences between some pics.
This is the prototype #6 :

---

Some shots of the new Back with removable plate, so, i can use any different board, and have a more futureproof design. I just need to reprint the red plate to fit a new configuration for the board ports.

---

A shot of the front control pannel. With Power ON/Off button, Hotkey, Select and Start buttons.

[acris]

Hello @Marcelo-Souza

I have the same problem to buy products.

for your question hdmi :

try these :

mount -o remount,rw /boot
edit this filenano /boot/config.txt
add this line : hdmi_force_hotplug=1

when you start without hdmi cable, normally it's ok
et when you plug hdmi cable, normally it's boot to TV screen

[Marcelo Souza]

Thanks for the Tip. I will try it now !

@acris said in ROMNI - My 3D Printed New tiny RecalboxArcade :

Hello @Marcelo-Souza

I have the same problem to buy products.

for your question hdmi :

try these :

mount -o remount,rw /boot
edit this filenano /boot/config.txt
add this line : hdmi_force_hotplug=1

when you start without hdmi cable, normally it's ok
et when you plug hdmi cable, normally it's boot to TV screen

[Substring]

Hi ! Nice game&watch arcade cab ^^

For your question regarding composite/hdmi auto select ... Hard to tell, i'm not sure anyobe ever succeeded here

[Marcelo Souza]

I am back to this posts. Just to post a possible "solution" for my obvious question... A way to Auto-Switch between HDMI<>AV... It seems that this guy made a script that Detects the hdmi plug and switch the config settings...

Hope it works ...

https://github.com/superjamie/lazyweb/wiki/Raspberry-Pi-Display-Auto-Switching

@acris Hey.

I´ve changed the lines with hdmi_Force_hotplug=1 and then it worked, the recabox and games apearead over hdmi (video and audio) but now , even after unplugin the hdmi and turning off and on the system again, it´s sticked with hdmi output... The monitor i am using only turns on if some signal enters over the composite in... so it seems that pi isn´t sending composite signal anymore after i unplugged the hdmi cable. I will reverse the config edition to check...

[azvarel]

A W E S O M E

I love it all very much

[Marcelo Souza]

Finally reach the beta stage with my project. Hope you guys like it.
Now i need to build a custom theme, since the latest recalbox has "SMALL SCREEN" themes, but the gamelist font stills VERY tiny... Unreadable.

image url)

[Dragu]

@Marcelo-Souza
You can edit the themes and increase the font size very easy.
By the way, I also find it very nice, and having some 4.1" compo spare screens, I think about it.

[protoplasta]

It looks just amazing.

[Gaetan]

Much better than the neogeo mini !
And you can have all the neogeo games collection in it

[voljega]

@marcelo-souza beautiful !

how are the buttons ? I've always wondered of those kind of mini buttons were and felt as good as the standard ones

[ian57]

@voljega if it is small "service buttons"... they are very hard; and it is difficult to play with.