[4.1-Unstable] Bug reports

[Substring]

@kelv Most of the sd card is RO (for read only), but this never prevented kodi from working. That is UNLESS your share is mounted as read-only because of a file system error (check dmesg)

Regarding the updates, and what really surprises me, is that the new unstable we released on sunday has a very important feature : updating the recalbox.conf. We made it the good way : it retrieves your previous settings of course. So if you set to unstable, and after updating to the last unstable, it still forces stable, i'm getting veeeeeeery suspicious, as my 4.1 SDs work flawlessly

[Skazz]

@Substring I found the "bug".

In the new recalbox.conf there is a new line for dreamcast (at the end):

dreamcast.videomode=DMT 9 HDMI

When I set the videomode to DMT4 HDMI then everything works again.
For the future it could be nice to have a documentation of the changes of the recalbox.conf.
Is there a documentation about these videomodes?

[Update]
Found this one:
https://github.com/recalbox/recalbox-os/wiki/N64-:-return-to-ES-(EN)
Which videomode was before?

[Substring]

@Skazz a documentation about these video modes ? Dude, it's just common raspberry stuff ... You can have a look at https://github.com/recalbox/recalbox-os/wiki/Video-configuration-detailled-(EN) also

[badges3000]

I have problems with Dreamcast emulator too. It plays only windowed, not in fullscreen. I had to set the config to CEA 16. It there a other way to play in fullscreen? I reset the config to get a clean one, but nothing changed.

[Substring]

@badges3000 same trick as N64 : we use lower resolution for performance. You should check how your tv/monitor upscales, it's not a bug on recalbox side

[Skazz]

@Substring

Suggestion: the videomodes (especially for PSX DC N64) could be changeable via the Recalbox menu. Like the selection of the emulation in the actual releases.
It would be another great feature.

[Substring]

@Skazz such a thing could be done for ANY emulator, but this is definitely not a priority in ES. I'd rather have it in the web manager for now + it requires a little knowledge + tvservice must get the good EDIDs (which is not always the case).

[jackalpret]

Hi, i'm using in pendrive unstable version for pc 64 bits.
I burn the image twice, and i have the same problem, doesnt save the config changes, and If I connect in pc with linux the "share" partition isn't created/accesible ... I thought the first boot is not creating well the share partition.

[starmagoo]

@rockaddicted how do I activate the driver correctly?
I use controllers.xboxdrv.enabled=0 to deactivate the xboxdrv. After the upgrade to 4.1 my Xbox Controller doesn't work correct.

[rockaddicted]

You have nothing to do, just to remapp your controller in ES.

[Substring]

I'd need mappings of wired xbox360 controllers, wired xbox one controllers. For this purpose, the easiest for you is to go to http://recalbox/help then launch the script and paste here the generated link.

Thank you very much

[rockaddicted]

@substring wired xbox360 controllers with xpad, are already up to date on repo.

[styletwo-wan]

Has the "bluetooth major improvement" been integrated into the build 11402041 ? Thank you.

[paradadf]

@styletwo-wan I don't know, but just update to the latest build and you'll have it.

[peterpan123123]

@paradadf btw. update is superslow right now...

[rockaddicted]

@peterpan123123 yep bandwith issue... you will have to retry later.

[grgohr]

@Substring here it is:

sdl2-jstest -l

sh: setterm: command not found
Found 2 joystick(s)

Joystick Name: 'Xin-Mo Xin-Mo Dual Arcade'
Joystick Path: '/dev/input/event0'
Joystick GUID: 03000000c0160000e105000001010000
Joystick Number: 0
Number of Axes: 2
Number of Buttons: 10
Number of Hats: 0
Number of B***s: 0
GameController:
not a gamepad
Axis code 0: 0
Axis code 1: 1
Button code 0: 288
Button code 1: 289
Button code 2: 290
Button code 3: 291
Button code 4: 292
Button code 5: 293
Button code 6: 294
Button code 7: 295
Button code 8: 296
Button code 9: 297

Joystick Name: 'Xin-Mo Xin-Mo Dual Arcade'
Joystick Path: '/dev/input/event1'
Joystick GUID: 03000000c0160000e105000001010000
Joystick Number: 1
Number of Axes: 2
Number of Buttons: 12
Number of Hats: 0
Number of B***s: 0
GameController:
not a gamepad
Axis code 0: 0
Axis code 1: 1
Button code 0: 288
Button code 1: 289
Button code 2: 290
Button code 3: 291
Button code 4: 292
Button code 5: 293
Button code 6: 294
Button code 7: 295
Button code 8: 296
Button code 9: 297
Button code 10: 298
Button code 11: 299

[grgohr]

@Substring ok i've been able to get the last libretro core working (from lakka xu4) so i guess it should be added back (I am not sure I understand your defconfig pr thing : should I add a line like BR2_PACKAGE_LIBRETRO_SCUMMVM=y ?)
2 issues though:
_ scummvm does not launch games directly, seems to be a recent scummvm bug, related to dir scan might be fixed soon

• more critical : i cannot browse the /recalbox/xxx/ folders and add games (grayed out folders) : any idea ? i can put and browse a game folder anywhere else (with the remout -rw) but that is not the purpose. seems there is conflict with scummvm own access rights and recalbox access rights. and i can't find the relevant .ini files to force the path. any idea much appreciated (very few other posts on the same issue, grayed out folders in scummvm for sd card browsing)

[Raphael Bueno Hatencia]

wifi stopped working. Can recalbox connect to a wifi with ssid hidden?
I typed correctly the name and password, but it dosnt connect. Only via ethernet cable.

My Recalbox manager (http) is in french, how to change back to english?
I tried the brazilian and USA flag, but the language dosnt change. My system is in portuguese by the way.

Thanks

[Substring]

@grgohr to add the package, yes that's basically the idea, though doing make menuconfig, add the core then make savedefconfig and send us a pull request is the best way to do it

Regarding that grayed folder stuff, no idea