Raspberry Pi 3B+ (Plus) - Compatible?

[voljega]

@noktambule ben le problème est résolu car l'encadré ne s'affiche plus sur mon smartphone :))

[Ratte]

@gkralicek2
I made some testruns with your settings:
arm_freq=1600
gpu_freq=500
core_freq=500
sdram_freq=500
sdram_schmoo=0x02000020
over_voltage=4
sdram_over_voltage=2

I can NOT confirm a stable system with the settings.
Allways kernelpanic or sometimes just ---- nothing --- .

With 1550 Mhz the system ran stable, at boot there was occasionally a kernelpanic if it had been running for some time, but if the system where up and running it was stable. I suspect that a better heat sink could help here. The enclosed is a bit small. With 1500 MHz, the system runs unobtrusively, no problems.
My AmigaCD32 and DTV64 add-ons also work, with the PSP emulator still has something to fight.

[gkralicek2]

@ratte You might try without the GPU, core and SDRAM overclock. Just keep the ARM oveclock @1600 and see if you can boot and get something stable. If it is, then start adding one by one the other overclock parameters and check stability. If it's not stable just with the ARM oveclock, then try to b*mp the over_voltage to 6 and check again. If still not stable, then you have no choice and the ARM frequency has indeed to be decreased
Ability of Pi to max out frequency dépends on manufacturing quality. Some batches are really good, some average and some other really bad for overclocking but still within the range of the standard quality specs from the manufacturer.

[Ratte]

@gkralicek2
Hi, thanks for the hint. I know the selection process of the CPU dies. Years ago, I had contacts with AMD and ATI (then still separate) for a computer retailer. Among other things, I have configured test systems for magazines.
http://www.pcgameshardware.de/PC-Spezialist-Supernova-Hardware-64840/Tests/Ultimative-Spielepower-171721/
The game with voltage and cooling is also fun, only the original heat sink of the PiPlus is a joke.

[gkralicek2]

@ratte yeah but what could we expect more out from a 30 euros board ?
They add more stuff with each new release and keep the same low price so they have to be on the cheap side in order to cut costs...hence the cheapo heatsink but hey it's better than nothing

[TeKnOoLoGiK]

Hello Everyone,

If that can help, you can overwrite le boot partition (the fat one) with boot partition from "kali-linux-2018.1a-rpi3b+-re4son"

It is the Unofficial Kali Linux 2018.1 Images with Re4son-Kernel.

First, download the image from here :

https://whitedome.com.au/re4son/download/kali-linux-3bplus-re4son/

After extrat with 7zip the img file and after extrat the 0.fat file tou your recalbox boot partition with overwriting the file...

Enjoy

I hope that help ...

Regards

[Gaetan]

@teknoologik so what ? Recalbox will work on B+ ??

[cazeysan]

@teknoologik said in Raspberry Pi 3B+ (Plus) - Compatible?:

Hello Everyone,

If that can help, you can overwrite le boot partition (the fat one) with boot partition from "kali-linux-2018.1a-rpi3b+-re4son"

It is the Unofficial Kali Linux 2018.1 Images with Re4son-Kernel.

First, download the image from here :

https://whitedome.com.au/re4son/download/kali-linux-3bplus-re4son/

After extrat with 7zip the img file and after extrat the 0.fat file tou your recalbox boot partition with overwriting the file...

Enjoy

I hope that help ...

Regards

It's not just a boot problem ...

[TeKnOoLoGiK]

Sorry, a little correction on my previous post because I tryed with a fresh sd card with original recalbox and I tryed to put directly the files on the boot partition an I had a black screen... ...

I do againt my first try and that was okay ...

My friend clone his sd card with previous version of RECALBOX with all his ROM.
On this card, 1st I tryed to boot but I had the yellow Lightning.
After i copy on my boot partition the files from the boot partition of "retropie-4.4-rpi2_rpi3".
I started the PI3b+, and I had 4 Raspberry at screen.
After I copy the files from the boot partition of Unofficial Kali Linux 2018.1 Images with Re4son-Kernel.
I started the PI3b+, and that boot ...

I don't know why that work .. but that work ....

[TeKnOoLoGiK]

En français, pour être plus clair sur la manipulation :

Mon collègue m'a cloné sa carte SD avec l'avant dernière version de la RECALBOX sur une nouvelle carte avec toutes ses ROMs
J'ai la partition de boot, la partition du système et la partition share où il y a les ROMS.

Je met la carde microSD dans le PI3B+

Je démarre le PI3B+ : j'obtient un eclair jaune en haut a droite
Je copie sur la partition de boot les fichier de la partition de boot de RETROPIE en écrasant les fichier

Je démarre le PI3B+ et j'obtient 4 framboises en haut a gauche.

Je prend l'image de Unofficial Kali Linux 2018.1 Images with Re4son-Kernel
J'ouvre l'archive de kali linux avec 7zip
puis dans 7zip j'ouvre el fichier 0.fat.
Je copie les fichier de 7Zip vers la partition de boot de ma SD

Je met ma SD dans le PI3B+, et là j'arrive à booter...

[voljega]

@teknoologik et ça sert à quoi ?

[TeKnOoLoGiK]

@voljega a faire fonctionner la RECALBOX sur un PI3B+ car la version actuelle officielle ne fonctionne pas dessus... c'est une manipulation que j'ai trouvé et faisant des bidouilles pour que ça fonctionne

[Substring]

@teknoologik tu bootes sans wifi et sans BT. Et je ne suis pas convaincu du bon fonctionnement du pi derrière

[gkralicek2]

@substring J'ai fait ce genre d' "opération Frankeinstein" il y a quelques temps déjà pour pouvoir amorcer Recalbox sur Pi 3 B+. Au final même si les émulateurs se lancent et que les jeux fonctionnent normalement, on a régulièrement de gros lags bizarres (sous emulation station notamment) qui indiquent tout de même que quelquechose ne tourne pas bien rond :)). Sans parler de l'absence de support réseau qui enlève tout intérêt au système. Ce n'est franchement pas une méthode que je conseillerais d'appliquer sauf aux bricoleurs du dimanche :=))

[maxmoro77]

@gkralicek2
To follow this discussion I'm learning French !!
“Les bricoleurs du dimanche” is FANTASTIC !!!

[Substring]

@gkralicek2 ouf je sers encore à qqc hahaha

[gkralicek2]

@substring Ohh que oui ! ;=)

[WillemNorias]

@Substring, est-ce que la prochaine release embarquera la compatibilité RPI3B+ ? Si je ne me trompe pas, une version est prévue pour avril.

Merci pour le travail abattu

[English spoken area : on]

Will the next release contain the RPI3B+ compatibility ?
If don't say mistakes, a version is planed current april ?

Thanks for your nice work

[English spoken area : off]

[acris]

https://gitlab.com/recalbox/recalbox/blob/master/CHANGELOG.md

[cyrilweb]

@acris said in Raspberry Pi 3B+ (Plus) - Compatible?:

https://gitlab.com/recalbox/recalbox/blob/master/CHANGELOG.md

Bonsoir C'est quoi en faite.. J'ai peur de pas être certain.. c'est le changelog d'une version qui sortira le 20/04 et compatible 3B+ ?