Ps4 Controller on Recalbox 4.1.0

[lhari84]

@dreamscape
I can recommend a clean reinstallation of whole Recalbox 4.1.0 and then try with Pi 3's just internal Bluetooth only.
On my Pi 3 it works great with the PS4 controller. - Also installed it at a friend where both PS4 and PS3 controller work perfectly.

[dreamscape]

I have tried with one upgrade install and then 2 fresh installs from the master build image

https://archive.recalbox.com/updates/v1.0/unstable/

Nothing works. It will not see it no matter what i try. PS3 controller works flawlessly, plug in USB press PS button and disconnect and it works perfectly on the bluetooth.

[Substring]

@dreamscape we'va talked on irc already, your controllers may have a firmware that doesn't work with linux yet

[acris]

You need to connect in usb port for this gamepad.

[lhari84]

@Substring

Do you have detailled info which controllers will not work?
Is it maybe the "2016" version, which has the lightbar on another place?
https://www.psu.com/feature/31122/New-PS4-Controller-vs-original-DualShock-4--what’s-the-difference

I'm thinking about buying a second controller for my Recalbox, so if the fault is by 2016 version of PS4 controller, I would try to get the "old" version.

Thanks

[Substring]

@lhari84 said in Ps4 Controller on Recalbox 4.1.0:

Do you have detailled info which controllers will not work?

None at all. But it should be the same compatibility as Lakka

[fordhamwt]

My PS4 controller worked fine, until I cleared the controllers. Now I am having your problem.

[imkeisozo]

I have 2 controllers. After all midnight trying to connect my second controller (Sony Ps4 Wireless v1) i recognized all I can try is useless. But now, connect my raspb, a usb bluetooth stick and my first controller (Sony Ps4 Wireless V2) and it works!!

Sorry for my bad English, i'm new in this forum and only wanna help.
Hope everyone can play with the v2 controller, i think that they will fix the v1 connection in the next versions.

[Substring]

@imkeisozo I don't have any PS4 controller. How do you make the difference between v1 and v2 ?

[imkeisozo]

I can tell only visual thing.
In the v2 the buttons are grey and in the v1 are totally black.
But in software i have 0 idea

The V2 is in the left.

[Substring]

@imkeisozo any model number on the sticker on the back that would differ ?

[imkeisozo]

@substring yes, sorry
V2: CUH-ZCT2E (this works)
V1: CUH-ZCT1E

[Substring]

@imkeisozo Great thank you

[Substring]

@imkeisozo Just checked with @supernature2k : his v1 pads do work using the internal BT on 4.1

[imkeisozo]

@substring Sorry if this can't be answered in this post but... How I can use the internal bluetooth?

[paradadf]

@imkeisozo you need to wait for the 4.1 release.

[imkeisozo]

@paradadf Okey, i'll wait a stable 4.1 version.
Thanks for your attention