AMIGA CD32 EMULATION - HOW TO -

[voljega]

@pillabichos I don't know if you are using Cd32 games or regular amiga one. If it is the latest, the keyboard mapping on uae4arm / amiberry is faulty : you have to configure it as an en/US one and then some games may require the enter or 1 2 3 4 keys from the numerical pad.

Although I don't remember any problems on WHDLoad with Superfrog....

[Substring]

@voljega am I reading we can't get rid of the keyboard ?

[voljega]

@Substring Really ???? I've been saying exactly that to you for the past year and a half, that you can't get rid of the keyboard unless some kind of virtual keyboard is hardcoded into the emulator. (and even that is not a good solution imho)

Amiga games just use too much keys even to just start a game. This can be anything between Enter, Returns, Space, 1, 2, 3, 4, F1, F2, F3, etc..., and sometimes S or other letter keys

And I don't really see what your issue is with that.
Amiga 500/1200 are COMPUTERS for christsake it's perfectly logical to emulate them with keyboard and mouse, and this also should be the case for Amstrad CPC for instance where crappy hardcoded shortcuts just ruin the experience for games where you really need the keyboard like adventure games.
And games requiring heavily the mouse like Populous or things like that will never be perfectly playable with a joystick emulating the mouse anyway it's not the same thing.

Besides needing a keyboad never bothered the team when it had to include DOSBox, MSX or Odyssey 2 emulators on which some or all games are unplayable without it.

[Ratte]

@Substring
There are possibilities to remap buttons inside the uae.config.

Thats one of the reasons, why i asked you for recalbox-development tutorials.
As far as i can see there is some sort of SDL-remapper inside recalbox ?!
If i understand this correctly, this is the way to unify all input devices to one universal configuration ?!
The other way should be uae.config files for every different Input-device with a big start-bash to figure out what kind of controller ist conneted top the pi.

At the moment it is hardcoded to xbox-controller (I use the speedlink torid).
The first picture in this thread is the current setup in this turtorial.

BR
André

[Ratte]

@voljega said in AMIGA CD32 EMULATION - HOW TO -:

Amiga games just use too much keys even to just start a game. This can be anything between Enter, Returns, Space, 1, 2, 3, 4, F1, F2, F3, etc..., and sometimes S or other letter keys

Thats why i choose the CD32 for this experiment.
It is not a computer .. but it can be ...

[Substring]

@voljega easy pal
The basic configuration must allow a pad to be usable in games + quit the emulator. My tries with uae4arm-rpi months ago required me to have a keyboard to press F12 to reach the GUI and then quit. That's not really what I'd like for recalbox, and that's also why i leave the community find what's the best emulator. From that point, i can have a look and help much.

Sadly there is no virtual keyboard, so of course i know you'd need a keyboard

What is also a great point is having mouse buttons on shoulders to skip intro/trainers, and eventually moving the mouse with the right stick.

But of course, emulating a computer would require a keyboard most of times. My question rather meant "is a keyboard mandatory ?"

[Substring]

@Ratte said in AMIGA CD32 EMULATION - HOW TO -:

If i understand this correctly, this is the way to unify all input devices to one universal configuration ?!

that's the point of configgen, yes. In the es-systems.cfg, you can see a %CONTROLLERS% in the command line of configgen. ES substitutes this with a load of parameters (you can see the result in the es log). Then configgen calls generators we write for each emulator to write configuration files depending on which pads are plugged.

The other way should be uae.config files for every different Input-device with a big start-bash to figure out what kind of controller ist conneted top the pi.

errrr ... no Such case would be acceptable for people who do know what they do and shouldn't be forbidden (i.e. : allow custom files). But this should not be the main way to configure the emulator

[Substring]

@voljega @ratte whichever disagreement you have regarding adf, whd or CD32, i would rather implement the 3 of them, depending on the configuration efforts it requires. We want something easy for users, and knowing their "web resource" for roms, and the recalbox "drag rom in the right folder" philosophy, i'd implement what is easy for a user.

ADF in the recalbox way will be a slight pain ... but that's my role as a dev

[voljega]

@Substring said in AMIGA CD32 EMULATION - HOW TO -:

The basic configuration must allow a pad to be usable in games + quit the emulator. My tries with uae4arm-rpi months ago required me to have a keyboard to press F12 to reach the GUI and then quit. That's not really what I'd like for recalbox, and that's also why i leave the community find what's the best emulator. From that point, i can have a look and help much.

OK well that is working with amiberry right now without too much trouble you can use the pad to enter gui and leave the emulator.
Deeper configuration requires the SDL2 version which is there but not finished and I haven't tested it at all.

I can easily add the CD32 in what I've done I already have everything I need regarding bios and conf and tested it successfully in standalone mode but I lack the courage and/or motivation for it.
It's like one hour of dev and one of testing.

[Substring]

@voljega said in AMIGA CD32 EMULATION - HOW TO -:

I lack the courage and/or motivation for it

yeah, like when i try to kick my butt to write the C64 configgen hahaha

[Ratte]

@voljega

Amiga games just use too much keys even to just start a game. This can be anything between Enter, Returns, Space, 1, 2, 3, 4, F1, F2, F3, etc..., and sometimes S or other letter keys

Commodore released a tool for the CD32 called JoyMouse (can even run on a A500 config).
JoyMouse can be used to emulated a mouse with the gamepad.
AND it can be used to remap keys to controller-buttons !!!!

I will post the documentation this evening.
(remember, also usefull for A500 !!!)

br
André

[Ratte]

joymouse v40.2
(c) Copyright 1993 Commodore-Amiga, Inc. All Rights Reserved
Usage: joymouse [XMOVE=n YMOVE=n DELAY=nframes ACCEL CREATEKEYS] OR [OFF]
Defaults: XMOVE=4 YMOVE=4 DELAY=1 and no CREATEKEYS or ACCEL
Re CREATEKEYS see lowlevel.doc SystemControl() and libraries/lowlevel.h
For CD32 game controller mouse emulation. Requires lowlevel.library

Joymouse uses lowlevel.library to read the CD32 port1 game controller
and convert directions and the lower right/left (red/blue) buttons into
mouse input events for CD32 titles which absolutely require the game
controller to emulate the Amiga mouse for Intuition.

The additional CREATEKEYS keyword tells joymouse to turn on the
SCON_AddCreateKeys feature of lowlevel.library SystemControl().
When CREATEKEYS is used, you will also receive RAWKEY events
for all gamecontroller buttons. Note that you will even receive
RAWKEY events for the directions and buttons which have been
converted to mouse events. This means that if you ask for MOUSEBUTTON
or MOUSEMOVE events you will see both those AND the created RAWKEY
events for those actions. You could ignore either (just remember
to ReplyMsg them). See libraries/lowlevel.h for the port1 RAWKEY
values you will receive.

The ACCEL option adds mouse acceleration. This should not be
used in drawing programs, and probably shouldn't be used in programs
for young children, since it makes the pointer harder to control.
But it can be good for titles with widely spaced things to click
on. For a HIRES LACE screen, try XMOVE=6 YMOVE=6 ACCEL [CREATEKEYS].

If joymouse is required, it should be used only if running under V40+,
and only in startup-sequence (since if user started you from an icon,
they would have a real mouse). Although if the user has a real game
controller you may want to use joymouse even if started from an icon.
If your application exits, be sure to do JOYMOUSE OFF.

Will return RETURN_FAIL if lowlevel.library is not available.
Will return RETURN_WARN if joymouse is already running.

standard usage:

failat 21
run >NIL: joymouse

[lulu13]

I did exactly according to the instructions, but the game does not start, the black box is for a while and then goes back to the home screen, what's wrong with it?

Raspberry Pi model: Pi 3 B
•Recalbox version (build) : "unstable" 4.1 build 42

[lesage1983]

Bonjour,
je suis français j'ai suivi le tuto j'ai réussi à installer amiga cd32 sur recalbox en suivant le tuto, j'ai lancé superfrog mais je reste bloqué au menu. Je ne peux pas lancer le jeu, j'ai branché une manette XBOX 360 filiaire mais ça ne marche pas je ne comprends pas d'où vient le problème. La manette fonctionne pour les jeux nes, supernes, mame. Donc le problème ne vient pas de la manette. Comme le tuto est en anglais j'ai peut-être loupé un truc. merci
Hello,
I am french i followed the tuto i managed to install amiga cd32 on recalbox by following the tuto, I launched superfrog but I remain blocked on the menu. I can not launch the game, I plugged in a XBOX 360 wired controller but it does not work I do not understand where the problem comes from. The controller works for nes, supernes, mame. So the problem does not come from the controller. As the tutorial is in English I may have missed something. thank you

[hubi]

@Ratte
Thank you for sharing and your tutotorial. It works (Recalbox 4.0.2).
I only tried superfrog yet. Other games will follow after I made the remaining steps.
How can I finish superfrog and get back to emulationstation? I use iBuffalo SNES Pad. Could not find a combination.

[hubi]

I have connected my keyboard. With ESC and F12 I get out of the game. But do not go back to the emulationstation. Please help.

[voljega]

You must enter into the gui (ctrl I think) and then click quit

[hubi]

@voljega I will try, thank you.
I just connected a ps3 controller. with L1 I can leave the games direct to ES.
But I miss some buttons, like Fire 2.

[Ratte]

Sorry for my late responce.
We are working on our house.
Regarding the CD32 "quit" problem.
I had to update the archiv, because "quit" must be mapped to button "8".
And in the meantime I have successfully added two player support.
BR
André

Are there any news regarding c64-support ... i like to add DTV64 in the future

[Substring]

@ratte said in AMIGA CD32 EMULATION - HOW TO -:

Are there any news regarding c64-support ... i like to add DTV64 in the future

nope