Cheapest possible Recalbox with RPI 3
-
@Substring Maybe I shall present myself a bit, because I am not really a professional with this:
I am 30 years old and a teacher of German and English. I raised up with all kinds of new media, because my parents bought everything but the usage was heavily restricted on a per day basis. Because the stuff was so expensive back then I was not allowed to program let allone pry open the cases and see what happens :-). Furthermore doing stuff with our bare hands was also controlled by my parents because they thought it may cause us harm. (I built a wooden house with friends and never told my mom because she would have forbidden it.) However they meant no harm to me, they just wanted that I become something where I would get a good pay. Therefore sadly as it is, I never learnt programming, nor how all the stuff worked. It only happened later between the age of 20 and 30 that I went mad and wanted to know more. I am an early adopter, as my dad is, and I bought the first iPad, iPod, Android Phone, Raspberryi pi and so on. Just to see how it works, not really for anything else. Kind of trying to get my childhood going again :-).
But being a teacher and having been raised with both books and video games I figured out that a lot of colleagues consider video games a bad thing when compared to thriller books where people get seriously harmed and then killed in awfull ways. I sure have a lot of discussion when talking to my colleagues, who claim books are better than games, which is a lie because every hobby is valuable so long as you don´t forget to do your work. Therefore I am more respectful to my pupils and so are they to me. I was always too sleepy at school because I have read the lord of the rings instead of having a healthy sleep. I think that today only media has changed, not so much the pupils. If we had phones back then I bet I would have rather had a game then reading through The Lord of the Rings. I feel that books are a valuable media but if your parents haven´t been reading to you when you were a child it is to no avail to try and force them at school. I tend to work with what is already given, and they are fascinated by media more than ever.I did a bit of programming, I know how to use a terminal, I also soldered a touchscreen onto my first pi (it looks awful but it works), I built myself an Ugly Drum Smoker with my bare hands and I am having a whale of time with Pulled Porks, but all in all I am nowhere near being a professional in any of these areas. I am just trying to get them to find out, what they have a talent for and then try to move in that direction. Many of the pupils are talented in media and they never get there because they are told to be nerds or some are nerdy and never get the oppertunity to find out until they are 30 and teach German and English instead of computer-science :-).
My pupils are around 15 to 17 years old. I only know them for half a year but some of them are really talented in media. I am leading a media workshop so it is not about programming itself. Some of them will produce youtube tutorials, because they feel more like it. They should just learn that creating media is so much work and fun, that they could earn money with it, that it is important in every field of todays work. And they should see the other side, the creative one rather than just consuming. Seeing your very own product and consuming it is so much more fun that just buying yourself a ps4 or a smoker :-). I think this is something that´s total wrong with society. We only consume and don´t create and therefore Europe goes to hell because we are all so self centered and somewhat stupid in terms of what we are capable of. But don´t get to distracted:
I don´t want to solder with them because I see legal issues with the insurance. And the school doesn´t have soldering irons. 100 million for a f**king symphony in Hamburg, not a cent for schools... .
I am however interested in the pi0. I will have a look and thanks for the reichelt link.
-
Where do you by the zero? It is neither for sale at amazon, nor at reichelt. Ebay wants 20 €, I think this is not as it is intended.
-
@Seramis Hahaha we have a recalbox core team member from Hamburg
Anyway, I'm not sure to understand the aim of your workshop, but feel free to ask any question regarding recalbox
-
Hm OK:
The pi zero can be bought at pihut. What essentials should be bought to have this as easy as possible?
- pi zero
- micro sd card
- power supply
Which adapters shall I also oder? Is this a thing?
https://thepihut.com/collections/raspberry-pi/products/raspberry-pi-zero?variant=14062715972The goal is just to help them create something valuable to their own with as less help as possible and without the fear of breaking something costly. Furthermore the pi is so flexible that they can move to other projects on there own. Computer Science is so boring here in Germany. You never get to see your results, it all happens on the screen. I want to do a bit of programming first, work with raspbian, get it going via the terminal. The gaming console would happen at the end of the year, as a gift so to say.
-
@Seramis I think you mistake Computer Science for robotic, electronic or something, it's perfectly normal for result to appear on the screen in a Computer Science course, heck that's what Computer Science is all about.
-
@voljega Sorry I'm a non native speaker, I chose the wrong word. You are right. The thing is that we program robots on screen and they never see it happen. They are also incredibly afraid of dismantling hardware.
They aren't allowed to break things no more..., something incredibly wrong here in Germany. One has to see how things work in breaking them apart, this has to happen as a child. This isn't about money, there are things for children which are meant to be broken, but parents tell them to be overly cautious with everything. This drives me nuts. :-).Anyhow we got things going and I am surprised how well everyone at school liked the idea. If this goes well I will publish the concept for free.
Getting the pizero is still a thing, people are afraid of ordering elsewhere than Amazon.... Maybe I have to buy for the whole class.
I have to say that I still can't believe their reaction that they actually admire old games being 15 years old and growing up with CoD. Some girls like to do a smartphone casing with LED lights, we will fetch an Arduiono for this. But many go for the pi version, I will have a look at kano first, see if they aren't to old for this.
-
@Seramis http://www.whereismypizero.com/
adafruit is in USA, so better not order from them
pihut is in UK, pimoroni seems english too, i'm not sure. Anyway both can be trusted
A pi 0 is very cheap. Unless you fail the soldering of the GPIO (hich can happen with kids who are not used to solder), breaking the card is not a big loss but for their project.
One thing for pi0 : it uses mini hdmi and mini usb, so they'll probably need some adapters to have a display + plug something. Remember it has only 1 usb port, so they'll need to switch between a keyboard and a pad or a wifi dongle to configure recalbox -
I ordered at PiHut and got myself the mega kit with everything one needs. Unfortunately my class ends a bit sooner as planned but I am going to get a new class. So for the current we are just building a retro gaming station as easy as possible because we only have 6 lessons a 45 minutes left and I see that gpio tricks aren´t a good idea without the theoretical knowledge about them.
But: I would like to do a more ambitioned project with the next course. I am wildly fascinated about the gpio pins myself, I can solder but electritians would wildly go mad about my work, because it´s not too beautifull. Consider me a beginner with electronics (I can build a pc, I know very much about Software, but electricity is something I tried to avoid so far.)
One here had the idea to use old controllers and wire them to the gpios of the pi. I think this is exactly what we should be doing instead of buying cheap china ware (nothing against those, but I feel this is all about trying to do as much on your own as you possibly could).The thing is: I don´t want to solder at school. The group is pretty large and I don´t feel comfortable with that. Is it possible to use a breadboard instead and what do I need to buy for that? Again, this needs to be as cheap as possible!
I have made a list but I am not too sure about this. We are going to use the RPI3 and the PiZero, depending on the portemonaie of the pupils:
This is the T-Cobbler Plus (Does it work with both the RPI and the Zero? The pins look the same to me.
https://www.amazon.de/Sintron-T-Cobbler-Extension-Rainbow-Raspberry/dp/B00NWA2AS0/ref=sr_1_1?ie=UTF8&qid=1484646900&sr=8-1&keywords=gpio+to+breadboardAnd then a breadboard or rather a complete set like this here:
https://www.amazon.de/Sintron-T-Cobbler-Extension-Breadboard-Raspberry/dp/B00WSXXLZS/ref=sr_1_5?ie=UTF8&qid=1484648086&sr=8-5&keywords=gpio+to+breadboardI am not a pro with this and I am going to test this at home way before going into classrooms with this. In my eyes this could serve as testing out the gpio setup, before doing soldering right? I imagine them doing this at class, so I can see if their setup works and then I will solder their setup at home.
-
@Seramis Both look fine, yes
If you're lazy at soldering, i found that not too long ago : https://shop.pimoroni.com/collections/raspberry-pi/products/gpio-hammer-headerFor old controllers : you can use the gamecon driver, which preserves the original connectors. Beware, as we've had problem with the PSX pads, you can use only one for now.
-
This is already a part of the box, but a nice addition for others reading this! Thanks.
-
@Seramis this might be interesting for you as well (concerning roms):
https://forum.recalbox.com/topic/4560/mame-roms-for-free-download-authorized-by-original-authors
-
Today school freaked out about my project class. Parents have called my school to tell them that their kids are interested in stuff, they never would have thought they are capable of. Now I was handed a class 5, 7 in addition to my 10 starting in February - so in about two weaks from now. There is no concept but we are allowed to do soldering and much more. I was encouraged to help them realize their own project, no matter what that may be (some girls are doing a smartphone case with a pizero and lights). This came out of nowhere because normally video gaming is considered a bad thing. Thank you very much for the vectrex project, this will become in handy for the older pupils.
I think it would be nice to built some cool retro gaming consoles with serious games for the little ones. Their own ones. This is going to be fun.Oh I need something:
A really cheap hdmi monitor for the pi, large enough that you could to some programming, I am thinking about KANO here. But not too large. It should be powered in the same manner as the rpi via mini-usb. Any recommendations? Cheap it must, Yoda would say.https://kano.me/store/eu/products/kano-complete
What about this here?
https://www.amazon.de/dp/B01HPV7FMC/ref=wl_it_dp_o_pC_nS_ttl?_encoding=UTF8&colid=O4C92PJPQ1OF&coliid=IFUPPPWKOFNHM&psc=1
I see that I need the GPIOs here to get the touch function right? The other model, which costs 3 € has the option that you will have the touch function via usb. Are there any disadvantages? I would rather go for the GPIO version... . -
@ian57 any screen advice fitting OP's needs ?
Former dev - Please reply with @substring so that i am notified when you answer me
Ex dev - Merci de me répondre en utilisant @substring pour que je sois notifé -
@Substring No specific needs. We don´t need large resolutions. But on screen text shall be readable, HDMI plug and play (to make it easier), if it has touch function ok, but this is not mandatory because we will only need it as a screen. I intend to make them do their own boxes. A DIY PC for the young ones and a retro gaming console for the older ones.
LOL... I had to look up OP, now I know
-
@Seramis @Substring this one is more expensive but 7" and 1024x600 http://www.banggood.com/7-Inch-1024-x-600-HDMI-Capacitive-IPS-LCD-Display-For-Raspberry-Pi-Banana-Pi-p-1059318.html?rmmds=search
5" can be good too http://www.banggood.com/5-Inch-HDMI-TFT-LCD-Touch-Screen-For-Raspberry-PI-2-Model-B-B-A-B-p-977667.html?rmmds=search
-
@Seramis Original Poster
touch is not effective on recalbox, you should know it
Now, we are talking about a pi0 + a HDMI screen ... are we heading to the right direction still ? maybe you should consider several budgets, depending on what they want to do -
Hi there, yeah, I am considereing different budget projects and I think I have a strategy to trick the parents into buying all salami tactic style. But it is well worth the experience and the money.
I consider them buying either a PiZero or a RPi3, and I will explain them the basics (as well as the differences between the two) beforehand. Then I will make sure, that we are going to build a system on the basis of kano. We are going to add everything that we see fit or appropiate. So the system gets larger and larger but only with meaningfull parts.
We may add a screen, if desired or a small audio output system. The parents will receive the costs beforehand but they can decide what their children need and what they already have at home. If someone doesn´t want to by a screen for 30-40 €, the child may also attach the rpi to one of our screens at school. There is an adapter issue there, but we can also ssh into it, so no problem there.
Some may want to build a spycam or sensors or an internet radio. The Recalbox is my giveaway at the end of the year. We will also talk about copyright there, so that they know what to expect and what not.
At topic there:
I bought a five inch screen with touch, and I know that it doesn´t work with recalbox, but I am using raspbian too and I thought it would be nice to have as an addition. I have managed to alter the config.txt via putty and I also changed the recalbox.conf via the web interface. However I do have an issue with N64 games, wich is only minor, but there. I have also read a thread for that specific display which can be found here in the forum, but the Thread Starter doesn´t seem to use n64, so the issue is not explained there. I think it has to do with the native solution though. So here is my display:http://www.waveshare.com/wiki/5inch_HDMI_LCD
By the way it is ok. You can´t do anything wront here. The nativ resolution is said to be:
hdmi_mode=87
hdmi_cvt 800 480 60 6 0 0 0This is the tutorial I followed:
https://github.com/recalbox/recalbox-os/wiki/TFT5-Screen-HDMI-(EN)
Works like a charm, except for N64 games.I wrote this in the recalbox.conf:
n64.core=gliden64
n64.emulator=mupen64plus
n64.ratio=16/9
n64.smooth=1#n64.videomode=DMT 4 HDMI
n64.videomode=defaultThis results in the following: N64 games start in 4:3 but there is an edge right of the display where it isn´t used. It just stays blank. Altering the conf results in N64 games not starting at all or the screen turning white. I tried different DMT Modes except, resulting in either crashing or having weird formats where some parts are missing.
Is this due to the native resolution of n64 games and is there a solution to this? It is not a big issue though I could live trough this. -
@Seramis N64 is 4:3 whereas your screen is 800/480 => 5:3 so yes, black borders on the side (which should anyway happen with any emulator)
Have you set
global.videomode=defaultANDn64.videomode=defaultin your recalbox.conf ?Former dev - Please reply with @substring so that i am notified when you answer me
Ex dev - Merci de me répondre en utilisant @substring pour que je sois notifé -
@Substring I did. I thought about such a thing. Then it is ok I guess.
-
Ok here is another thing I need a display capable of displaying 1024768 or higher. It should be cheap. Unfortunately there are only 1024600 devices out there. Touch would be nice but is not Obligatory.
