I can't hardly say what the issue was. We lost power for about an hour and when it came back I was able to boot and connect like there never was an issue.
I'd suggest rebooting your router if you have a similar issue and if that doesn't work reboot your PC.
I didn't get access to a wired connection yet, but I was able to get on another PC, also Windows 7. I had no problems connecting through either method. The new screen is cool too!
Clearly this is my problem not Recalbox's but if y'all like I could continue to update the thread as I tinker just in case someone else down the line has the same issue.
I don't know yet. All the wired ports on our router are being used at the moment but whenever I get an opportunity to plug it in I'll do that and tell y'all what happens.
Hey buds, I just grabbed the newest recalbox because I haven't updated in over a year. I decided to flash the new recal to a new card and just tinker with it from the ground up rather than upgrading my current build.
Amazing, love the new intros, the new layout, new menus, the free music, and the little games ain't bad. I connect to the internet no problem then I hop onto my browser and try to transfer games. Can't connect using http://recalbox or the IP, I launched WinSCP and gave it go and got the same thing. Just timing out and not getting a response from the Pi.
I never had any problems with connecting in either fashion before and I'm just a dummy following your instructions so I can't offer any insight into what's up beyond telling you guys about it.
It's no real bother for me as I was just seeing what is new, my current build suits me just fine, but someone else may have the issue and I didn't see it when I searched the forum so I figured I'd report it to y'all.
Have a good one and thanks a bunch for all your hard work lad, youse guys are amazing.
Howdy folks, I was just wondering where I'd go for a list of SBCs that work with Recalbox and the sort of information that would go with. I'm sure there's a list or chart or some such similar somewhere but I couldn't find it very easily and would appreciate a link.
Thanks buds, and thanks for the amazing OS. it's great.
Firstly I should brag on y'all and show you much love. I do love recalbox, it's the best media center in my house and also the cheapest. Thank y'all very very much for all your hard work and whatever it is you lot get out of doing this I wish loads on you.
Next thing ought to be me recognizing my question has probably been answered. I did look and actually got answers to most of my questions I just have this one left and I'm not getting results in English and I am too ignorant for French or German, sorry.
When you update through recalbox do you lose your theme? I've read you'll keep your roms and saves but I would like explicit confirmation that I'll keep my theme before I update.
Thanks a bunch for your time. Thanks again to everyone who works on Recalbox. Have a great day y'all and if any of youse got answers thank you as well champ.
No one else ever experienced a problem trying to configure any controller's right trigger?
If I update might that fix it? If so will I lose my games and theme?
What emulators support this? I have a dolphin bar and wiimote I connected to my PC about a year ago. As a mouse doing normal PC functions I'd say it works better than expected, but once you load an emulator and set the emu to have your mouse be your lightgun it goes all sorts of funky. Mine was super shaky and acted like it was magnetically drawn to the edge of the screen. I never tried on the Pi because I figured if it's not sorted on PC it's not sorted on Pi.
Have you gotten a bar and mote to work with any emu outside of dolphin emu? I don't think it'll work even if you got the rpi and sensor bar working together because the emus themselves bug it out. In my experience anyway.
Best of luck bud, I'm rooting for you.
I've not changed a single thing on my recalbox in a year or so. I use the same controller, haven't touched to files, and my updates are off. Just seemingly randomly a year into playing and my right trigger goes. I figured must be the controller so I plugged up another, both are xbox 360 wired controllers, and go to configure the controller and when I get to right trigger rather than accepting any input I get "Not Defined". I tried hitting buttons other than the trigger just to get it to define somewhere but it still skips. I tried a third but got nothing different. I'm not holding the button or anything silly like that.
Any idea on what I should do? If there a way to clear all controller configs? Would that even help me or am I going down the wrong path?
Thanks lads, much respect and love for youse. Recalbox has been my favorite console since I made my first build. I have a ps4 but it turns out I bought that mostly for decoration as I'm almost always playing Recal.
Sorry bud, I'm a little confused. I'm a hobbyist, so neither seem right, but both might be too. The engines I know how to use require some code and some photoshopping so whatever that makes me I am.
Rather than trying to figure out what you're getting at or what difference it makes I think it might be more productive if I say this. I'm making this game because I want to for my Recalbox. Whenever y'all support an engine I can use I will have my game ready. I will share it if it's allowed.
Sorry if that came off as a bit rude. I didn't mean to be I'm just trying not to ramble.
Thanks buds.
Do y'all have guidelines or any sort of rules for game devs?
I was inspired by the OS to make a game sort of about the OS. My idea was a bit of Evoland, Comix Zone, and the 90s cartoon ReBoot set in Recalbox OS. The player has been sucked into the OS and has to battle through the various emulator/console inspired stages sort of thing.
Can OpenBOR or OpenBOR paks/mods be played on Recalbox?
If not, are there any homebrew level engines, like Game Maker, RPG Maker, etc that can work with Recalbox?
Edit- Sorry buds, didn't know there's no embedding here. Here's the link: Slaystation
Howdy pals, I made this back in august-september of 2016. I have to say right off the purpose was just to learn in the ins and outs of recalbox, so if there's something I could have mucked with but didn't please drop me a line and tell me what else I could have customized.
I took pictures of the case back when it was newer, but never showed my work editing/personalizing recalbox itself. I thought I'd buy a capture card before I showed my work so my colors didn't go wonky recording a tv screen with a camera, but here I am april 2017 with no capture card. I started another side project it seemed to fit in so I went ahead and made the video and upped it to youtube. I call it Slaystation, I wasn't aware that's a type of vanity ( ya know those mirrors with lights all around them that ladies put makeup on in front of ) when I coined the name, but that's kinda funny so I continue to call it slaystation. It's Horror themed just because Halloween was coming up and I needed a pick theme to mess around with theme changing and what not.
Don't worry about the channel video's upped to. Firstly it's still growing and I've very little content but more so because that's not the channel's purpose. A little while ago I thought it'd be nice if there was someone at least trying to curate fan made stuff so I made a youtube channel and got to work recording gameplay and linking films. I'm just saying there's no reason to feel obligated to thumb, or sub, or support that channel in anyway. That's not it's purpose, it's only purpose is to show people what is out there made by the people who love it.
Anyway, I had loads of fun mucking around with y'all's very very neat OS. It's super easy to use, and the community of support is absolutely amazing. You get quicker help here than you do when you contact a service center for the stuff you paid for. It's awesome, y'all're awesome. Thanks a bunch folks.
I love it. Simple and brilliant. hats off, sir.