Can anyone help me?
Posts made by DreyMIX
-
Settings on monitor Sony PVM 14M2U CRT
Hello,
I can't find the right setting with my Sony PVM 14M2U monitor.
I have tried various configurations, but the screen is never aligned correctly.Currently used:
- Raspberry Pi 3b
- Recalbox 18.07.13
- Gert-VGA VGA666 Adapter Board
- VGA Male to BNC Male Adapter (5 BNC. 3 RGB + 2 sync H / V)
This is the configuration in the "config.txt" file:
disable_splash=1 disable_overscan=1 gpu_mem_256=128 gpu_mem_512=256 gpu_mem_1024=512 avoid_safe_mode=1 kernel=zImage overscan_scale=0 disable_audio_dither=1 dtparam=audio=on dtoverlay=vga666 enable_dpi_lcd=1 display_default_lcd=1 dpi_group=2 dpi_mode=87 hdmi_timings=320 1 16 30 34 240 1 2 3 22 0 0 0 60 0 6400000 1 hdmi_group=2 hdmi_mode=87
I believe that the problem is of the "hdmi_timings" line, in fact even with other values taken from the web, I always get unsatisfactory results. But isn't there any way to put the correct values based on my monitor?
Thx!
-
RE: Current state AdvanceMame with Recalbox 6.1
@paradadf Sorry for the delay. Thanks a lot
-
RE: Current state AdvanceMame with Recalbox 6.1
@paradadf Thanks,
as soon as I have some time, I'll see if I can set up at least one mame2003plus game using two spinners (hoping to succeed).However, the intent of my post was also to make people understand what happened on the latest version of Recalbox. I don't know if you can tell the developers. As I repeat, there is no hurry, as long as it is made present.
Thanks!
-
RE: Current state AdvanceMame with Recalbox 6.1
Good evening,
I was able to find and install again the old version of Recalbox v18.07.13, on the same 32 GB microSD where I had previously installed the Recalbox v6.1. I again formatted and reset the partition with the programs mentioned above.
I tried some games, from the table above, that with the Recalbox v6.1 gave the aforementioned slowdown problems. Instead with the v18.07.13 it has behaved very well.The games have been started, as always, using the AdvanceMame emulator:
- Outrun
- Arkanoid Returns
- Championship Sprint
- Danny Sullivan's Indy Heat
- Dragon Gun
Video Youtube: Recalbox v18.07.13 Advancemame perfect!
https://www.youtube.com/watch?v=NW_sXq-uZUo -
RE: Current state AdvanceMame with Recalbox 6.1
@jorgemagana I don't use mame2003 because as specified, for most of these ROMS I use 2 spinner. with mame2003 I never managed to make it work, while with advancemame it is very simple.
@glook yes also for this use advancemame.
Maybe they inadvertently did something that slowed Advancemame in some way. Before I used these ROMS without any problems.
-
RE: Current state AdvanceMame with Recalbox 6.1
Then I installed Recalbox 6.1 on a new micro SD (unfortunately I only have a 32 GB memory).
First I performed a complete formatting using the software:
https://www.sdcard.org/downloads/formatter/index.htmlThen as recommended by some guide, I started guiformat.exe completely deleted any remaining partitions:
http://www.ridgecrop.demon.co.uk/index.htm?guiformat.htmSo I uploaded the image on the microSD, started the system, connected to the Wifi, copied the ROMS for Advancemame and this is the result. Still slowdowns and audio problems.
-
RE: Current state AdvanceMame with Recalbox 6.1
@gkm Hello,
so you too, the Outrun roms gives you problems of slowing down. It is already something and I feel relieved (at least it's not just my problem).
It would be great if I could try another one of the ROMS listed above.But I also wanted to do another test. Install the Recalbox 6.1 on an 8 GB microSD card (I currently use a 64 GB microSD card), and try out the Outrun roms for example. Then install Recalbox 18.07.13 (hoping to find the image of the OS somewhere) on another microSD and try to start Outrun. Always using the AdvanceMame emulator. And let's see a little ...
-
Current state AdvanceMame with Recalbox 6.1
Hello,
this below is a table made by me with the games that I currently have installed on my Recalbox 6.1 and that I use with the AdvanceMame emulator to take advantage of games that use lasergun, trackball, spinner and vector graphics.
As you can see in the second column "Recalbox v18.07.13", most of the roms worked correctly and without any particular problems. I noticed the first slowdowns from the 6.0 version of Recalbox and continue to be there also in the Recalbox 6.1 (column 3).Can anyone confirm this?
Thanks!
AdvanceMame Emulator status
ROMS RecalBox v18.07.13 RecalBox v6.0 & v6.1 1000 Miglia: Great 1000 Miles Rally Perfect Perfect Arkanoid Perfect Perfect Arkanoid - Revenge Of Doh Perfect Perfect Arkanoid Returns Perfect Slow Asteroids Perfect Perfect Bad Lands Perfect Perfect Bang! Perfect Perfect Battle Zone Perfect Perfect Born To Fight Perfect Perfect Block Block Perfect Perfect Cabal Perfect Perfect Caliber 50 Perfect Perfect Cameltry Perfect Perfect Centipede Perfect Perfect Clay Pigeon Perfect Perfect Championship Sprint Perfect Slow Crystal Castles Perfect Perfect Crater Raider Perfect Perfect Dragon Gun Perfect Good in Menu - Slow in Game Discs Of Tron Perfect Perfect Danny Sullivan's Indy Heat Perfect Slow Gigas Perfect Perfect Goindol Perfect Perfect Gunbuster Perfect Slow Gravitar Perfect Good Irritating Maze, The Perfect Perfect Lethal Enforcers Perfect Good Lemmings Perfect Perfect Lethal Justice Good Good Lucky & Wild Perfect Slow Major Havoc Perfect Good Lunar Lander Perfect Perfect Line Of Fire / Bakudan Yarou Perfect Slow Marble Madness Perfect Perfect Missile Command Perfect Perfect N.y. Captor Perfect Good Night Stocker Perfect Perfect Off The Wall Perfect Perfect Operation Wolf Perfect Perfect Operation Wolf 3 Good Good Out Run Perfect Slow Pole Position Perfect Perfect Puzz Loop Perfect Slow Outfoxies, The Good Slow One Shot One Kill Perfect Perfect Point Blank Perfect Slow Police Trainer Perfect Perfect Prebillian Don't test Good Racing Hero Don't test Slow Revolution X Good Slow Road Blasters Perfect Good Rough Racer Don't test Slow Sharpshooter Perfect Perfect Space Gun Perfect Slow Star Trek Don't test Good Star Wars Good Slow Super Sprint Perfect Slow Tac/scan Perfect Good Tempest Perfect Slow Terminator 2 - Judgment Day Don't test Good Tournament Arkanoid Perfect Perfect Thunder Ceptor Don't test Slow Syvalion Perfect Perfect Under Fire Don't test Slow Wec Le Mans 24 Perfect Perfect Zombie Raid Perfect Perfect -
[Idea] Show the top scores on the frontend
Hello,
would it be possible to create a script in order to read the scores saved by the mame / neogeo and create a screen in the frontend for viewing?Thx!
-
RE: advance mame is very slow on Recalbox 6.0
@acris Sorry, is there really no way to solve the problem? I have also reported the bug on github, but no one has deigned to answer, even if only to say: ok let's check or let you know or something.
-
RE: No frontend if Splashscreen is not ended
It happened to me too, but by changing the "system.splash.length" parameter, it didn't solve my problem (Even increasing it to 30 seconds, however, EmulationStation started too early.). The only trick I've found is going to edit the EmulationStation startup script.
Connect to the recalbox server via SSH. Then type the following command in the console:
nano /etc/init.d/S31emulationstation
Or using the WinSCP software, enter the "/etc/init.d/" folder and edit the "S31emulationstation" file
Immediately after the line where there is the string "start)", I added a pause of X seconds "sleep 23".
My video lasts 25 seconds. So I set a pause of 23 seconds to make EmulationStation start after 23 seconds. Leaving a gap of 2 seconds, to give way to make a fade out.... case "$1" in start) sleep 23 ...
Warning: make a backup of this file, because with the updates of Recalbox, you will lose the modification made.
-
RE: A 3 problems with Recalbox
I can only help you for point 2.
I suggest you use the following software to download game covers:
https://www.skraper.net/index.html?lng=en -
RE: advance mame is very slow on Recalbox 6.0
Hello @acris ,
I did several tests with some parameters (advmame.rc.origin):device_video auto display_resizeeffect none display_rgbeffect none
but the lag persists. Can you by chance check if the "Championship Sprint" or "Arkanoid Returns" roms (for example) actually work without slowdowns?
Thx!
-
RE: advance mame is very slow on Recalbox 6.0
it is indeed strange at this point. But as I wrote above, I tried to install it on another raspberry (the one I used previously for the recalbox 4.1 with the same SD and the advancemame worked wonderfully), without touching anything, putting the roms "Championship Sprint", for example, and I immediately notice the slowdown (it will be for the FPS or something else, unfortunately I can't tell you). Have you no way to test yourself too?
-
RE: advance mame is very slow on Recalbox 6.0
Hi, I put both "emulator" and "core" on advancemame and I already use the 0.106 mameset as I used on the recalbox 4.1. But on many roms despite the 4.1 with advancemame, the system is slowed down.
Sorry for my english. -
RE: advance mame is very slow on Recalbox 6.0
Hello, I tried to install the image of Recalbox 6.0 on another Raspberry Pi 3 B (not B +) with a 32 GB Sandisk. After starting the system for the first time, I tried not to change anything except the controls. So I put the "Championship Sprint" roms in the "mame" folder and selected the AdvanceMame core. I confirm that there are still problems with slowdowns and crackling sounds
-
AdvanceMame lento su Recalbox 6.0
Salve,
per caso qualcuno di voi a notato prestazioni molto lente sulla nuova versione di Recalbox 6.0 utilizzando l'AdvanceMame?
Prima sulla 4.1 era uno degli emulatori più veloci (migliore del mame2010 e mame2003). Ma ora per la stragande maggioranza dei giochi è diventato lentissimo. Per esempio con Championship Sprint ora gira veramente lento, cosa che prima girava fluidissimo. Ma ce ne sono molti altri a dare problemi di questo tipo.Ci sarà un modo per risolvere o tornare ad una vecchia versione dell'AdvanceMame? Per il resto è tutto a posto.
Grazie.
-
RE: advance mame is very slow on Recalbox 6.0
I have the same problem too. In the previous version they worked wonderfully!