Best posts made by DreyMIX

Hello,
I can't find the right setting with my Sony PVM 14M2U monitor.
I have tried various configurations, but the screen is never aligned correctly.

Currently used:

• Raspberry Pi 3b
• Recalbox 18.07.13
• Gert-VGA VGA666 Adapter Board
• VGA Male to BNC Male Adapter (5 BNC. 3 RGB + 2 sync H / V)

This is the configuration in the "config.txt" file:

disable_splash=1
disable_overscan=1
gpu_mem_256=128
gpu_mem_512=256
gpu_mem_1024=512
avoid_safe_mode=1
kernel=zImage
overscan_scale=0
disable_audio_dither=1
dtparam=audio=on
dtoverlay=vga666
enable_dpi_lcd=1
display_default_lcd=1
dpi_group=2
dpi_mode=87
hdmi_timings=320 1 16 30 34 240 1 2 3 22 0 0 0 60 0 6400000 1 
hdmi_group=2
hdmi_mode=87

I believe that the problem is of the "hdmi_timings" line, in fact even with other values taken from the web, I always get unsatisfactory results. But isn't there any way to put the correct values based on my monitor?

Thx!

Hello,
this below is a table made by me with the games that I currently have installed on my Recalbox 6.1 and that I use with the AdvanceMame emulator to take advantage of games that use lasergun, trackball, spinner and vector graphics.
As you can see in the second column "Recalbox v18.07.13", most of the roms worked correctly and without any particular problems. I noticed the first slowdowns from the 6.0 version of Recalbox and continue to be there also in the Recalbox 6.1 (column 3).

Can anyone confirm this?

Thanks!

AdvanceMame Emulator status

Can anyone help me?

Hi,
I recently installed the latest version of RecalBox on Raspberry Pi5 with RGB Dual on CRT. I have a problem with the web configuration interface. It worked correctly only the first time, then every time I restart the Raspberry Pi5, the web page does not work correctly and then dies permanently.

[2024/10/30 12:35:38.533] (INFO ) : Recalbox Micro Webserver 1.0
[2024/10/30 12:35:38.553] (INFO ) : Parameters:
[2024/10/30 12:35:38.563] (INFO ) :   Interface    : 0.0.0.0
[2024/10/30 12:35:38.573] (INFO ) :   Port         : 80
[2024/10/30 12:35:38.581] (INFO ) :   Threads      : 10
[2024/10/30 12:35:38.588] (INFO ) :   Root folder  : /recalbox/web/manager-v3
[2024/10/30 12:35:38.594] (INFO ) :   Default file : /index.html
[2024/10/30 12:35:38.601] (INFO ) :   Debug logs   : 0
[2024/10/30 12:35:38.608] (INFO ) : [RestAPIRouter] Router initialized
[2024/10/30 12:35:38.615] (INFO ) : [WebServer] Server up!
[2024/10/30 12:38:01.312] (ERROR) : Signal 15 received.
[2024/10/30 12:38:01.319] (INFO ) : Server interrupted!

If I try to force restart the web service via SSH:
/etc/init.d/S93webmanager restart

At that point it seems to work. However, every time I restart the machine I have the problem again. ! What could have caused it?

Thanks