@Substring what about in "default mode" ? Is it possible to hide some menus from this mode?? Thanks

Bartop mode is working great, but I would like to add in and configure the controllers later, but the "controllers settings" menu is missing in this mode.
Any possibilities to unhide the "controllers settings" menu in "bartop" mode? Thankyou so much T--T

I've tested out the GPIO buttons from https://github.com/recalbox/recalbox-os/wiki/GPIO-controllers-(EN) And they worked out well except for the hotkey button (can t be use ) , but instead the hotkey is tie with the "select button"

Does this mean that the hotkey button in the gpio pin is not nessesary? Thankyou

@Substring thanks a lot

@lackyluuk Too bad for me ... I can t read German... I m a Thai >__< anyway, thankyou for your reply.

@xtreemsurf Your answer has cleared my doubts.. thanks a lot...!!! :
)

@voljega No .. it does nt work T-T

I hope I am correct this time...

@voljega

I must be confused here. You said "pin 5" (GPIO3) goes on switch " I " ( Right pin on the switch ) and nothing on switch " 0 " (Left pin on the switch ) Which part I am missing here ?? Thankyou

@voljega said in Rocker switch on GPIO pins?:

@NoAttitude no as I said pin5 goes on switch I and nothing on switch 0

This is it??