[Script] CLCD display on recalbox


  • Moderator
    Team
    Moderator
    Translator

    @la-vague I don’t speak french, but you have to copy the clcd-install.sh script preferably to /recalbox/scripts/ with, e.g. WinSCP. Connect with putty and navigate to that folder wirh cd /recalbox/scripts/, then chmod +x ./clcd-install.sh and finally run the script with ./clcd-install.sh. Follow the instructions then...



  • @paradadf
    hello,
    it is not work :

    Using username "root".
    root@recalbox's password:
    sh-4.3# cd /recalbox/scripts/
    sh-4.3# chmod +x ./clcd-install.sh
    chmod: ./clcd-install.sh: Read-only file system
    sh-4.3# ./clcd-install.sh
    ./clcd-install.sh: line 7: syntax error near unexpected token newline' ./clcd-install.sh: line 7:<!DOCTYPE html>'
    sh-4.3#

    thanks



  • @choum
    bonjour choum,

    désolé pour le retour tardif, j'ai du m'absenter 15 jours.

    login as: root
    root@recalbox's password:

    i2cdetect -y 1

     0  1  2  3  4  5  6  7  8  9  a  b  c  d  e  f
    

    00: -- -- -- -- -- -- -- -- -- -- -- -- --
    10: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
    20: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
    30: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
    40: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
    50: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
    60: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
    70: -- -- -- -- -- -- -- --



  • ls /dev/ :
    il y a bien I2c-1


  • Moderator
    Team
    Moderator
    Translator

    @la-vague make the partition rewritable with:
    mount -o remount,rw / before trying to change permits.
    And it seems to me you haven‘t copied the script properly, but downloaded some html code instead. After you copy the script, open it wirh WinSCP (use it to copy it too!) and see the file matches the code itself.



  • bonjour,
    pb trouver en remplaçant le fichier recalbox.conf avec celui d'origine c'est lui qui était en cause.
    merci a tous



  • GPIO03 (Pin 5 ) i have it on Power button, what can i do in this case? Can i transfer it on other GPIO pin?



  • @andrei

    I'm not sure you can do that.
    Why don't you put your power button on the run switch of the board which is normally intended for that ?



  • good idea , i will try that



  • Hey thanks for the answers guyz!
    Thank you so much!



Want to support us ?

Join us on :

207
Online

42588
Users

17153
Topics

128981
Posts

Looks like your connection to Recalbox Forum was lost, please wait while we try to reconnect.