@paradadf said in [Script] CLCD display on recalbox:
@choum hi! I´m not sure if you´ve missed the issues and PR I made on your repo, but wanted to give you a heads up about the installation script I wrote. Currently, it is based on the changes I made on my fork. Mainly and most important moving the scripts to a separated folder to have it better organized.
https://github.com/paradadf/Recalbox-Clcd/blob/master/clcd-install.sh
Bonjour,
message d'euure au lancement !
sous windows avec putty:
login as: root root@recalbox's password: # sh ./clcd-install.sh sh: ./clcd-install.sh: No such file or directory # cd / # sh ./clcd-install.sh ./clcd-install.sh: line 7: syntax error near unexpected token `newline' ./clcd-install.sh: line 7: `<!DOCTYPE html>' # chmod +x clcd-install.sh
merci de votre aide.
Bonjour,
Pour le script aucune idée, je ne l'ai pas pas encore testé ni développé.
Pour la commande i2cdetect -y 1, elle devrait normalement fonctionner, une fois les modifications effectuées ET le raspberry redémarré.
Si tu fais un : LS /dev/
Tu vois un I2c-1 (ou autre I2C)
@la-vague I don’t speak french, but you have to copy the clcd-install.sh script preferably to /recalbox/scripts/ with, e.g. WinSCP. Connect with putty and navigate to that folder wirh cd /recalbox/scripts/, then chmod +x ./clcd-install.sh and finally run the script with ./clcd-install.sh. Follow the instructions then...
If your question was answered, please mark it as solved: Topic Tools -> Ask a question + Topic Tools -> Mark as Solved
@paradadf
hello,
it is not work :
Using username "root".
root@recalbox's password:
sh-4.3# cd /recalbox/scripts/
sh-4.3# chmod +x ./clcd-install.sh
chmod: ./clcd-install.sh: Read-only file system
sh-4.3# ./clcd-install.sh
./clcd-install.sh: line 7: syntax error near unexpected token newline' ./clcd-install.sh: line 7: <!DOCTYPE html>'
sh-4.3#
thanks
@choum
bonjour choum,
désolé pour le retour tardif, j'ai du m'absenter 15 jours.
login as: root
root@recalbox's password:
0 1 2 3 4 5 6 7 8 9 a b c d e f
00: -- -- -- -- -- -- -- -- -- -- -- -- --
10: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
20: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
30: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
40: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
50: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
60: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
70: -- -- -- -- -- -- -- --
ls /dev/ :
il y a bien I2c-1
@la-vague make the partition rewritable with:
mount -o remount,rw / before trying to change permits.
And it seems to me you haven‘t copied the script properly, but downloaded some html code instead. After you copy the script, open it wirh WinSCP (use it to copy it too!) and see the file matches the code itself.
bonjour,
pb trouver en remplaçant le fichier recalbox.conf avec celui d'origine c'est lui qui était en cause.
merci a tous
GPIO03 (Pin 5 ) i have it on Power button, what can i do in this case? Can i transfer it on other GPIO pin?
I'm not sure you can do that.
Why don't you put your power button on the run switch of the board which is normally intended for that ?
good idea , i will try that
Hey thanks for the answers guyz!
Thank you so much!
@la-vague make the partition rewritable with:
mount -o remount,rw / before trying to change permits.
And it seems to me you haven‘t copied the script properly, but downloaded some html code instead. After you copy the script, open it wirh WinSCP (use it to copy it too!) and see the file matches the code itself.
