[Script] CLCD display on recalbox

Choum · 3 Feb 2018, 10:18

Hello,

I saw them today, this is wonderfull.

La Vague · 3 Feb 2018, 11:14

@choum
Bonjour,
achat de l'afficheur sur aliexpress. (1602 16x2 HD44780 Character LCD blue + 1pcs IIC/I2C 1602 Serial Interface)
branchement ok (rétro-éclairage)
et configuration (copie des fichier & modifications) mais a la commande: i2cdetect -y 1
ça ne fonctionne pas rien de détecté.
D’où viens le pb ?
merci de votre aide.

La Vague · 3 Feb 2018, 12:17

@paradadf said in [Script] CLCD display on recalbox:

@choum hi! I´m not sure if you´ve missed the issues and PR I made on your repo, but wanted to give you a heads up about the installation script I wrote. Currently, it is based on the changes I made on my fork. Mainly and most important moving the scripts to a separated folder to have it better organized.
https://github.com/paradadf/Recalbox-Clcd/blob/master/clcd-install.sh

Bonjour,
message d'euure au lancement !

sous windows avec putty:

 login as: root
root@recalbox's password:
# sh ./clcd-install.sh
sh: ./clcd-install.sh: No such file or directory
# cd /
# sh ./clcd-install.sh
./clcd-install.sh: line 7: syntax error near unexpected token `newline'
./clcd-install.sh: line 7: `<!DOCTYPE html>'
# chmod +x clcd-install.sh

merci de votre aide.

Choum · 5 Feb 2018, 17:33

Bonjour,

Pour le script aucune idée, je ne l'ai pas pas encore testé ni développé.

Pour la commande i2cdetect -y 1, elle devrait normalement fonctionner, une fois les modifications effectuées ET le raspberry redémarré.

Si tu fais un : LS /dev/

Tu vois un I2c-1 (ou autre I2C)

paradadf · 6 Feb 2018, 03:04

@la-vague I don’t speak french, but you have to copy the clcd-install.sh script preferably to /recalbox/scripts/ with, e.g. WinSCP. Connect with putty and navigate to that folder wirh cd /recalbox/scripts/, then chmod +x ./clcd-install.sh and finally run the script with ./clcd-install.sh. Follow the instructions then...

La Vague · 19 Feb 2018, 09:42

@paradadf
hello,
it is not work :

Using username "root".
root@recalbox's password:
sh-4.3# cd /recalbox/scripts/
sh-4.3# chmod +x ./clcd-install.sh
chmod: ./clcd-install.sh: Read-only file system
sh-4.3# ./clcd-install.sh
./clcd-install.sh: line 7: syntax error near unexpected token newline' ./clcd-install.sh: line 7: <!DOCTYPE html>'
sh-4.3#

thanks

La Vague · 19 Feb 2018, 10:10

@choum
bonjour choum,

désolé pour le retour tardif, j'ai du m'absenter 15 jours.

login as: root
root@recalbox's password:

i2cdetect -y 1

 0  1  2  3  4  5  6  7  8  9  a  b  c  d  e  f

00: -- -- -- -- -- -- -- -- -- -- -- -- --
10: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
20: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
30: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
40: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
50: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
60: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
70: -- -- -- -- -- -- -- --

La Vague · 19 Feb 2018, 10:23

ls /dev/ :
il y a bien I2c-1

paradadf · 19 Feb 2018, 13:46

@la-vague make the partition rewritable with:
mount -o remount,rw / before trying to change permits.
And it seems to me you haven‘t copied the script properly, but downloaded some html code instead. After you copy the script, open it wirh WinSCP (use it to copy it too!) and see the file matches the code itself.

La Vague · 23 Feb 2018, 09:57

bonjour,
pb trouver en remplaçant le fichier recalbox.conf avec celui d'origine c'est lui qui était en cause.
merci a tous

Andrei · 30 Mar 2018, 05:57

GPIO03 (Pin 5 ) i have it on Power button, what can i do in this case? Can i transfer it on other GPIO pin?

Choum · 31 Mar 2018, 12:05

@andrei

I'm not sure you can do that.
Why don't you put your power button on the run switch of the board which is normally intended for that ?

Andrei · 31 Mar 2018, 12:13

good idea , i will try that

apkdodo2 · 2 Jun 2019, 20:25

Hey thanks for the answers guyz!
Thank you so much!

[Script] CLCD display on recalbox

i2cdetect -y 1

Want to support us ?

79
Online

98.4k
Users

28.0k
Topics

187.0k
Posts

	login as: root
	root@recalbox's password:
	# sh ./clcd-install.sh
	sh: ./clcd-install.sh: No such file or directory
	# cd /
	# sh ./clcd-install.sh
	./clcd-install.sh: line 7: syntax error near unexpected token `newline'
	./clcd-install.sh: line 7: `<!DOCTYPE html>'
	# chmod +x clcd-install.sh

[Script] CLCD display on recalbox

i2cdetect -y 1

i2cdetect -y 1

Want to support us ?

79Online

98.4kUsers

28.0kTopics

187.0kPosts

79
Online

98.4k
Users

28.0k
Topics

187.0k
Posts