Exit emulator with one button press vía gpio

[Substring]

@supernature2k where is your fringing script to kill emulators via GPIO ?

[supernature2k]

@Substring try this:

import RPi.GPIO as GPIO
import time
import os
import thread
import datetime
import socket
import sys
from datetime import datetime
from configgen import recalboxFiles
# this last one retrieves emulators bin names

IPADDR = "127.0.0.1"
PORTNUM = 55355
# IP and port for retroarch network commands

QUIT = 3


GPIO.setwarnings(False)		# no warnings
GPIO.setmode(GPIO.BCM)		# set up BCM GPIO numbering 
 
GPIO.setup(QUIT, GPIO.IN, pull_up_down=GPIO.PUD_UP)
# GPIO on pin 3 is the GPIO 2 in BCM mode
#to Reset+

  
# Define a threaded callback function to run in another thread when events are detected  
def button_pressed(channel):
	
	nwcommand="QUIT"
	retroarch(nwcommand)
	killthats**t(channel)
		
	
#	on quit press, trying to kill all listed emus 
def killthats**t(channel):
	if channel == QUIT:
		for bin in recalboxFiles.recalboxBins:
				print bin
				proc = os.path.basename(bin)
				print proc
				os.system("killall -9 "+proc)


# 	sending network command to retroarch (only exit and reset atm)		
def retroarch(nwcommand):
	try:
		s = socket.socket(socket.AF_INET, socket.SOCK_DGRAM)
	except socket.error:
		print 'Failed to create socket'
		sys.exit()
	s.sendto(nwcommand, (IPADDR, PORTNUM))
		

GPIO.add_event_detect(QUIT, GPIO.BOTH, callback=button_pressed, bouncetime=2)
while True:
	time.sleep(0.2)

[sevenx]

@supernature2k
Does this automaticly start ES again after killing the Emulator?

[supernature2k]

@sevenx no as ES is not killed when you launch an emu

[sevenx]

@supernature2k
Do you have some time, to talk about a new project from me? Over PM?

[supernature2k]

@sevenx ok

[lackyluuk]

@8bit_astronaut maybe this article I wrote some time ago can help. I use the script to reset the emulator. But with replacing the RESET with QUIT you should be able to quit it and return to ES.

https://github.com/recalbox/recalbox-os/wiki/Emulator-interactions-via-GPIO-mapping-(EN)

[8bit_astronaut]

@lackyluuk that looks great! Ill check it in a moment, thank you so much!

[8bit_astronaut]

@lackyluuk its necesary to have an internet conection for recalbox???

[lackyluuk]

@8bit_astronaut No, I think it should also work without. But it is highly recommended

[DjLeChuck]

@8bit_astronaut Not at all. The internet connection is only useful for scraping directly with your recalbox or for accessing you share folder through your network.

[sevenx]

maybe?

exit-emu-1b-installer:
http://webcache.googleusercontent.com/search?q=cache:https://gist.github.com/Phantiss/3e0cab70f7084431e1c389d633e53662

rpi-exit-emu-1b .py
http://webcache.googleusercontent.com/search?q=cache:https://gist.github.com/Phantiss/b9248718a208e293d332feed0a9cbc27

S98exit-emu-1b
http://webcache.googleusercontent.com/search?q=cache:https://gist.github.com/Phantiss/813037bfd7c9d22a3cd2887714463eda

[DjLeChuck]

@sevenx Haha nice! I update the wiki page and links.

[DjLeChuck]

Wiki updated! https://github.com/recalbox/recalbox-os/wiki/Enable-Gpio-button-to-close-emulator-with-only-one-button-press

[supernature2k]

I think my script is betta (btw, I corrected this RESET instead of QUIT):

• sending network command to retroarch is better
• using sub's list of emulator bins is better (no need to modify script if new emus implemented)

[DjLeChuck]

@supernature2k Can you update the wiki this way?

[lackyluuk]

@DjLeChuck We could include @supernature2k s script into the article i posted above. This article is in general about interacting with emulators through the retroarch network commands. Instead of having multiple articles spreaded around we could have all in the same place. What do you think?

[DjLeChuck]

@lackyluuk Obviously you're right! My intention was only to restore the deleted page, but if we can removed it and say "Go on this page it's better!" I'm OK.

[lackyluuk]

@DjLeChuck I only try to keep the articles in a clean way to prevent confiusion so that many question can be answered ( I also want to write / change an article for the right image installation, because lot of people have problems with it )

If someone can confirm that @supernature2k s script is working like this above, then I can try to implement this in a proper way

[Substring]

@supernature2k's script still requires a "better integration" to work in recalbox (he knows what i expect from him). The idea i'd love is to have a confg file saying :

[GPIO26]
action=stopEmulators
[GPIO25]
action=shutdownSystem

such a thing
I find it pointless to cumulate python scripts to handle GPIO when all should be gathered into 1 single place