XBOX Series S/X Controller not pairing with Recalbox 7.1
zife last edited by zife
I bought an xbox series s controller (robot white) but this controller won't pair with my raspberry PI 3 (recalbox version 7.1).
I just changed the ERTM following this instructions (https://forum.recalbox.com/topic/17312/bluetooth-testers-wanted), but does not worked.
Somenone could help me ?
hello, I have same problem...
Tutorial from Your link for me was hard and I've done this for other way.
I edit /etc/modprobe.d/bluetooth.conf file with help of Filezilla FTP.
I try also PuTTy by logging and use this tutorial https://recalbox.gitbook.io/documentation/tutorials/controllers/configuration-test/manually-connect-a-bluetooth-control.
Unfortunately no results.
change the value of the line in recalbox.conf:
Khelann49 last edited by Khelann49
I have the same issue with a Raspberry 4 / Recalbox 7.1.1.
Can't pair my Xbox Series Controller.
I'll try changing the values quoted. Others getting the same issue?
palabalo last edited by
NO support!!! noooo! Do we have any idea why they are not supporting the wireless xbox one s? I mean if windows can do it? I was able to get it to pair, and connect on restart with 7.1.1 reloaded, but it wont work during emulation, Seems like its really close to working.
what I did to get it to Pair (but wont work in emulation)
nano /recalbox/share/system/recalbox.conf controllers.bluetooth.ertm=0 ##Enable PS3 controllers support controllers.ps3.enabled=0 #
This allows me to pair and configure just once i start a game it doesnt work.
I also tried adding the lines below but they didnt change anything.
Enable xboxdrv driver, disable this if you enabled ps3 controllers (0,1)
Set the amount of controllers to use with xboxdrv (0..4)
Seems so close to working anyone help?
Those controllers are not supported yet via bluetooth. You can use them only wired at this moment.