February 2019 Beta Version
-
@pilafsama said in February 2019 Beta Version:
ais bios mis à jou
bonjour
je suis sur rpi3
manette arcade 2 emulateurs encodeur usb
(type arcade)mise a jour de fevrier 2019, franchement beau boulot
j'ai juste un problème sur snes, retour a la page principal au lancement de jeu
mettre la config origine de :defaut en : ca fonctionne .......ok mais ou ?merci
-
Sorry if this is a stupid question. But its not quite clear from the FAQ.
Will I be able to update from this beta to the stable release once its out in the future and keep all my settings. Or will I have to install the stable fresh and start over? -
@zyphos
all new version erase old version, save your game or use usb disk drive for save your game, configuration etc.. -
@magfhilm tu dois avoir dans ton recalbox.conf une entrée: snes.core=snes9x_next. Change là en snes9x2010.
Certains cores ont changé de noms.
Nous sommes en train de reflechir à un moyen de faire les conversions en automatique pour la finale.
Bien entendu, ça ne touche que ceux qui ont le share sur un support externe. -
@recalbapt Ok, je prends note. Pas eu le temps encore de vérifier ou l'option se loge, ni si elle impacte potentiellement d'autres cores.
-
en tout cas reactif et pro, encore une fois bravo, effectivement sa fonctionne nikel
bravo pour ce que vous faite et merci pour nos heures de plaisirs;) -
@magfhilm holà
Désolé, je viens de voir ton message, perso j'ai fait le changement avec cette manip :
Lors du choix de la console Start / Paramètres avancés / Configuration avancée de l’émulateur / snes... -
Petit retour de bug des amoureux des CRT !
Ma config :
Raspberry Pi3B+
Sortie HDMI vers convertisseur HDMI/VGA puis péritel (CF Wiki)
Thème d'origine, en mode "CRT et tiny screen"
Stockage des jeux et config en interne sur Sandisk 16 GoDepuis la dernière mise à jour, Retroarch ne semble plus prendre en compte certains éléments de config personnalisés, placés dans le répertoire habituel (recalbox/share/system/configs/retroarch).
Notamment l'appel au custom aspect ratio (22) qui permet de gérer les viewports.
Par contre, quand on active manuellement le custom ratio en jeu (menu retroarch/setting/video), les valeurs prédéfinies sont bien prises en compte.
Un problème lié à la mise à jour de Retroarch en 1.7.6 ?J'ai eu ce problème au passage à la dernière Beta, alors que j'avais mes jeux et config en externe (Clé USB 16 Go). J'ai donc décidé de repartir de zéro, en ne gardant que mes fichiers de config de système, et stockage sur micro SD, mais même symptomes.
Voici mon fichier de support au cas où.
Merci pour votre boulot les gars, et bon courage pour la dernière ligne droite !
-
Recalbox Feb. beta x64 (stock)
Lenovo ThinkPad T430
Intel HD4000
Genuine PS3 controller connected via internal laptop BTApologies if this was asked...I can't figure out how to search just this thread.
NDS ROMS (.nds) are not launching for me...black screen then back to ES. I was having the same issue with Gamecube but remapped my controller is ES and that fixed the issue. However, NDS still continues to be broken.
Is anyone else having this issue?
TIA,
John
-
I see you created a new release candidate tag in Gitlab recently. New version will be 6.0.0. I suppose the final release is coming, good job!
-
I have my SNES ROMs in .zip format. It appears that the .zip is being extracted in the same folder as the .zip. The next time I update my gamelist, I am getting duplicates (.zip and .sfc).
John
-
je suis sur la beta et odroid xu4 et je viens de voir que pour mame les jeux ne sont pas affiche par ordre alphabetique alors que les autres systemes sont bien dans l ordre alphabetique
-
@johnodon said in February 2019 Beta Version:
Recalbox Feb. beta x64 (stock)
Lenovo ThinkPad T430
Intel HD4000
Genuine PS3 controller connected via internal laptop BTApologies if this was asked...I can't figure out how to search just this thread.
NDS ROMS (.nds) are not launching for me...black screen then back to ES. I was having the same issue with Gamecube but remapped my controller is ES and that fixed the issue. However, NDS still continues to be broken.
Is anyone else having this issue?
TIA,
John
Seems that the Desmume core is missing...
ls -la /usr/lib/libretro/
total 243188
drwxr-xr-x 2 root root 4096 Feb 24 17:06 .
drwxr-xr-x 32 root root 24576 Feb 24 17:06 ..
-rwxr-xr-x 1 root root 507016 Feb 24 17:06 4do_libretro.so
-rwxr-xr-x 1 root root 395512 Feb 24 17:06 81_libretro.so
-rwxr-xr-x 1 root root 558704 Feb 24 17:06 atari800_libretro.so
-rwxr-xr-x 1 root root 1720472 Feb 24 17:06 bluemsx_libretro.so
-rwxr-xr-x 1 root root 840200 Feb 24 17:06 cap32_libretro.so
-rwxr-xr-x 1 root root 498856 Feb 24 17:06 crocods_libretro.so
-rwxr-xr-x 1 root root 48140664 Feb 24 17:06 fbalpha_libretro.so
-rwxr-xr-x 1 root root 517640 Feb 24 17:06 fceumm_libretro.so
-rwxr-xr-x 1 root root 807784 Feb 24 17:06 fceunext_libretro.so
-rwxr-xr-x 1 root root 241768 Feb 24 17:06 fmsx_libretro.so
-rwxr-xr-x 1 root root 41368 Feb 24 17:06 freechaf_libretro.so
-rwxr-xr-x 1 root root 61216 Feb 24 17:06 freeintv_libretro.so
-rwxr-xr-x 1 root root 1905576 Feb 24 17:06 fuse_libretro.so
-rwxr-xr-x 1 root root 285408 Feb 24 17:06 gambatte_libretro.so
-rwxr-xr-x 1 root root 5815336 Feb 24 17:06 genesisplusgx_libretro.so
-rwxr-xr-x 1 root root 1871072 Feb 24 17:06 glupen64_libretro.so
-rwxr-xr-x 1 root root 1158208 Feb 24 17:06 gpsp_libretro.so
-rwxr-xr-x 1 root root 608168 Feb 24 17:06 gw_libretro.so
-rwxr-xr-x 1 root root 129376 Feb 24 17:06 handy_libretro.so
-rwxr-xr-x 1 root root 2962320 Feb 24 17:06 hatari_libretro.so
-rwxr-xr-x 1 root root 124880 Feb 24 17:06 imageviewer_libretro.so
-rwxr-xr-x 1 root root 655752 Feb 24 17:06 lutro_libretro.so
-rwxr-xr-x 1 root root 34738728 Feb 24 17:06 mame2003_libretro.so
-rwxr-xr-x 1 root root 36024776 Feb 24 17:06 mame2003_plus_libretro.so
-rwxr-xr-x 1 root root 68094528 Feb 24 17:06 mame2010_libretro.so
-rwxr-xr-x 1 root root 150936 Feb 24 17:06 mednafen_lynx_libretro.so
-rwxr-xr-x 1 root root 398992 Feb 24 17:06 mednafen_ngp_libretro.so
-rwxr-xr-x 1 root root 779960 Feb 24 17:06 mednafen_pce_fast_libretro.so
-rwxr-xr-x 1 root root 862320 Feb 24 17:06 mednafen_pcfx_libretro.so
-rwxr-xr-x 1 root root 7301712 Feb 24 17:06 mednafen_psx_hw_libretro.so
-rwxr-xr-x 1 root root 5183632 Feb 24 17:06 mednafen_psx_libretro.so
-rwxr-xr-x 1 root root 790400 Feb 24 17:06 mednafen_supergrafx_libretro.so
-rwxr-xr-x 1 root root 180048 Feb 24 17:06 mednafen_vb_libretro.so
-rwxr-xr-x 1 root root 154192 Feb 24 17:06 mednafen_wswan_libretro.so
-rwxr-xr-x 1 root root 483872 Feb 24 17:06 melonds_libretro.so
-rwxr-xr-x 1 root root 121240 Feb 24 17:06 meteor_libretro.so
-rwxr-xr-x 1 root root 1063640 Feb 24 17:06 mgba_libretro.so
-rwxr-xr-x 1 root root 1170512 Feb 24 17:06 nestopia_libretro.so
-rwxr-xr-x 1 root root 2198744 Feb 24 17:06 np2kai_libretro.so
-rwxr-xr-x 1 root root 831856 Feb 24 17:06 nxengine_libretro.so
-rwxr-xr-x 1 root root 88736 Feb 24 17:06 o2em_libretro.so
-rwxr-xr-x 1 root root 779800 Feb 24 17:06 pcsx_rearmed_libretro.so
-rwxr-xr-x 1 root root 1058248 Feb 24 17:06 picodrive_libretro.so
-rwxr-xr-x 1 root root 594248 Feb 24 17:06 pokemini_libretro.so
-rwxr-xr-x 1 root root 864016 Feb 24 17:06 prboom_libretro.so
-rwxr-xr-x 1 root root 113296 Feb 24 17:06 prosystem_libretro.so
-rwxr-xr-x 1 root root 909360 Feb 24 17:06 px68k_libretro.so
-rwxr-xr-x 1 root root 253264 Feb 24 17:06 quicknes_libretro.so
-rwxr-xr-x 1 root root 663624 Feb 24 17:06 snes9x2005_libretro.so
-rwxr-xr-x 1 root root 1632736 Feb 24 17:06 snes9x2010_libretro.so
-rwxr-xr-x 1 root root 2654736 Feb 24 17:06 snes9x_libretro.so
-rwxr-xr-x 1 root root 2988664 Feb 24 17:06 stella_libretro.so
-rwxr-xr-x 1 root root 133288 Feb 24 17:06 tgbdual_libretro.so
-rwxr-xr-x 1 root root 425440 Feb 24 17:06 theodore_libretro.so
-rwxr-xr-x 1 root root 71944 Feb 24 17:06 vecx_libretro.so
-rwxr-xr-x 1 root root 3717160 Feb 24 17:06 vice_x64_libretro.so
-rwxr-xr-x 1 root root 2086376 Feb 24 17:06 virtualjaguar_libretro.soI changed the default core to MelonDS and it works as expected.
John
-
@johnodon said in February 2019 Beta Version:
@johnodon said in February 2019 Beta Version:
Recalbox Feb. beta x64 (stock)
Lenovo ThinkPad T430
Intel HD4000
Genuine PS3 controller connected via internal laptop BTApologies if this was asked...I can't figure out how to search just this thread.
NDS ROMS (.nds) are not launching for me...black screen then back to ES. I was having the same issue with Gamecube but remapped my controller is ES and that fixed the issue. However, NDS still continues to be broken.
Is anyone else having this issue?
TIA,
John
Seems that the Desmume core is missing...
I changed the default core to MelonDS and it works as expected.
John
I manually added the latest nightly Libretro Desmume core to /usr/lib/libretro (had to rename it to desmume_libretro.so as the new naming convention is desmume2015_libretro.so) and it is working as expected.
John
-
This post is deleted!