Raspberry Pi 4

For information, Recalbox IS NOT compatible with Raspberry Pi 4 yet.
Pour information, Recalbox N'EST PAS encore compatible avec le Raspberry Pi 4.

The Recalbox Team.

RC version - support archives with pad configurations needed


  • Staff
    Moderator
    Team

    Hi friends,

    This applies only if you're currently testing / playing with the beta version (B+, etc.)

    As the pad configuration has been upgraded and the old configuration file (aka es_input.cfg) is deprecated and incompatible. That's why you need to reconfigure your pads each time you install the beta.

    In order to avoid that before releasing the stable version, we'd like to get as much pad configurations as possible. So if you want to help us, all you have to is very simple:

    1. Configure your pad and test it with the beta version. If possible, set hotkey on L3 (or Select if L3 doesn't exist).
    2. Make an support archive
    3. Post the support archive here and write exactly which pad you have.

    If you have configured several pads, please write all the pads you've configured.

    Thanks a lot!


  • Staff
    Team
    Moderator
    Translator

    @OyyoDams the pads I configured are:

    1. "ELAN TURBO PAD"
    2. "PLAYSTATION(R)3 Controller" (This is a Shanwan clone)
    3. "8Bitdo SN30 Pro"
    4. "8Bitdo NES30 Pro"
    5. "8Bitdo SN30 Pro 8Bitdo SN30 Pro" (This is the USB Connection)
    6. "8Bitdo NES30 Pro 8Bitdo NES30 Pro" (This is the USB Connection)

    https://file.ac/2OKUbcxu76Y/



  • @OyyoDams
    Based on regular Raspberry Pi 3 B with image dated 2018/11/29
    archive : https://file.ac/Dq4keWYhrvY/

    Pads:

    1. USB Wired pad : iNNEXT PAD (SNES Clone) with Hotkey as SELECET. No L2, No R2, No R3, No L3
    2. USB Wired pad : GameStop PS4 Fun Controller (PS4 Clone), L2, R2, L3, R3 and Hotkey mapped

    Hope it can help



  • @OyyoDams
    Bonsoir

    Now, please find archive using RPI3 B+ board:
    https://file.ac/zPXQZ_aaulg/

    Pads:

    1. USB Wired pad : iNNEXT PAD (SNES Clone) with Hotkey as SELECET. No L2, No R2, No R3, No L3
    2. USB Wired pad : GameStop PS4 Fun Controller (PS4 Clone), L2, R2, L3, R3 and Hotkey mapped

    I failed to connect Raspberry internal BT's to 8Bitdo SF30 Pro



  • @olivierdroid92
    Hi. I own a 8BitDo SF30 BT Pro pad, i managed to connect it to my RPi3B+ bluetooth with D-input mode (Start+B). See the manual if required. I didn't manage to connect it with the USB cable lol It doesn't work.
    Regards.



  • @Scavy
    thanks for feedback.
    Yes i've turned on 8bit pad with "B+Start"
    When I tried to connect 8bit pad in BT, an other pad was connected in USB Cable.
    So I will make an other try with no wired USB pad connected, only BT


  • Staff
    Moderator
    Team

    @nayok
    https://file.ac/7iZSbGHJpz4/

    xinmo 0003:16C0:05E1.0004:

    	<inputConfig type="joystick" deviceName="Xin-Mo Xin-Mo Controller" deviceGUID="03000000c0160000e105000001010000" deviceNbAxes="4" deviceNbHats="1" deviceNbButtons="13">
    		<input name="a" type="button" id="7" value="1" code="311" />
    		<input name="b" type="button" id="0" value="1" code="304" />
    		<input name="down" type="axis" id="1" value="-1" code="1" />
    		<input name="hotkey" type="button" id="4" value="1" code="308" />
    		<input name="left" type="axis" id="0" value="-1" code="0" />
    		<input name="pagedown" type="button" id="6" value="1" code="310" />
    		<input name="pageup" type="button" id="1" value="1" code="305" />
    		<input name="right" type="axis" id="0" value="1" code="0" />
    		<input name="select" type="button" id="8" value="1" code="312" />
    		<input name="start" type="button" id="5" value="1" code="309" />
    		<input name="up" type="axis" id="1" value="1" code="1" />
    		<input name="x" type="button" id="2" value="1" code="306" />
    		<input name="y" type="button" id="3" value="1" code="307" />
    	</inputConfig>
    

  • Staff
    Moderator
    Team

    @OyyoDams

    8 bitdo M30

    	<inputConfig type="joystick" deviceName="8BitDo M30 gamepad" deviceGUID="05000000c82d00005106000000010000" deviceNbAxes="6" deviceNbHats="1" deviceNbButtons="16">
    		<input name="a" type="button" id="7" value="1" code="311" />
    		<input name="b" type="button" id="1" value="1" code="305" />
    		<input name="down" type="axis" id="1" value="1" code="1" />
    		<input name="hotkey" type="button" id="2" value="1" code="306" />
    		<input name="l2" type="button" id="8" value="1" code="312" />
    		<input name="left" type="axis" id="0" value="-1" code="0" />
    		<input name="pagedown" type="button" id="6" value="1" code="310" />
    		<input name="pageup" type="button" id="3" value="1" code="307" />
    		<input name="r2" type="button" id="9" value="1" code="313" />
    		<input name="right" type="axis" id="0" value="1" code="0" />
    		<input name="select" type="button" id="10" value="1" code="314" />
    		<input name="start" type="button" id="11" value="1" code="315" />
    		<input name="up" type="axis" id="1" value="-1" code="1" />
    		<input name="x" type="button" id="4" value="1" code="308" />
    		<input name="y" type="button" id="0" value="1" code="304" />
    	</inputConfig>
    

    https://file.ac/57rjp-310WA/



  • Voici ma config via GPIO (boutons hotkey en place)
    https://file.ac/NLBMc8j36wU/

    <inputConfig type="joystick" deviceName="GPIO Controller 1" deviceGUID="15000000010000000100000000010000" deviceNbAxes="2" deviceNbHats="0" deviceNbButtons="9">
    	<input name="a" type="button" id="1" value="1" code="305" />
    	<input name="b" type="button" id="0" value="1" code="304" />
    	<input name="down" type="axis" id="1" value="1" code="1" />
    	<input name="hotkey" type="button" id="8" value="1" code="316" />
    	<input name="left" type="axis" id="0" value="-1" code="0" />
    	<input name="pagedown" type="button" id="5" value="1" code="311" />
    	<input name="pageup" type="button" id="4" value="1" code="310" />
    	<input name="right" type="axis" id="0" value="1" code="0" />
    	<input name="select" type="button" id="6" value="1" code="314" />
    	<input name="start" type="button" id="7" value="1" code="315" />
    	<input name="up" type="axis" id="1" value="-1" code="1" />
    	<input name="x" type="button" id="2" value="1" code="307" />
    	<input name="y" type="button" id="3" value="1" code="308" />
    </inputConfig>
    <inputConfig type="joystick" deviceName="GPIO Controller 2" deviceGUID="15000000010000000200000000010000" deviceNbAxes="2" deviceNbHats="0" deviceNbButtons="9">
    	<input name="a" type="button" id="1" value="1" code="305" />
    	<input name="b" type="button" id="0" value="1" code="304" />
    	<input name="down" type="axis" id="1" value="1" code="1" />
    	<input name="hotkey" type="button" id="8" value="1" code="316" />
    	<input name="left" type="axis" id="0" value="-1" code="0" />
    	<input name="pagedown" type="button" id="5" value="1" code="311" />
    	<input name="pageup" type="button" id="4" value="1" code="310" />
    	<input name="right" type="axis" id="0" value="1" code="0" />
    	<input name="select" type="button" id="6" value="1" code="314" />
    	<input name="start" type="button" id="7" value="1" code="315" />
    	<input name="up" type="axis" id="1" value="-1" code="1" />
    	<input name="x" type="button" id="2" value="1" code="307" />
    	<input name="y" type="button" id="3" value="1" code="308" />
    </inputConfig>


Want to support us ?

Join us on :

191
Online

52454
Users

17758
Topics

133638
Posts

Looks like your connection to Recalbox Forum was lost, please wait while we try to reconnect.