RC version - support archives with pad configurations needed
-
@OyyoDams the pads I configured are:
- "ELAN TURBO PAD"
- "PLAYSTATION(R)3 Controller" (This is a Shanwan clone)
- "8Bitdo SN30 Pro"
- "8Bitdo NES30 Pro"
- "8Bitdo SN30 Pro 8Bitdo SN30 Pro" (This is the USB Connection)
- "8Bitdo NES30 Pro 8Bitdo NES30 Pro" (This is the USB Connection)
-
@OyyoDams
Based on regular Raspberry Pi 3 B with image dated 2018/11/29
archive : https://file.ac/Dq4keWYhrvY/Pads:
- USB Wired pad : iNNEXT PAD (SNES Clone) with Hotkey as SELECET. No L2, No R2, No R3, No L3
- USB Wired pad : GameStop PS4 Fun Controller (PS4 Clone), L2, R2, L3, R3 and Hotkey mapped
Hope it can help
-
@OyyoDams
BonsoirNow, please find archive using RPI3 B+ board:
https://file.ac/zPXQZ_aaulg/Pads:
- USB Wired pad : iNNEXT PAD (SNES Clone) with Hotkey as SELECET. No L2, No R2, No R3, No L3
- USB Wired pad : GameStop PS4 Fun Controller (PS4 Clone), L2, R2, L3, R3 and Hotkey mapped
I failed to connect Raspberry internal BT's to 8Bitdo SF30 Pro
-
@olivierdroid92
Hi. I own a 8BitDo SF30 BT Pro pad, i managed to connect it to my RPi3B+ bluetooth with D-input mode (Start+B). See the manual if required. I didn't manage to connect it with the USB cable lol It doesn't work.
Regards. -
@Scavy
thanks for feedback.
Yes i've turned on 8bit pad with "B+Start"
When I tried to connect 8bit pad in BT, an other pad was connected in USB Cable.
So I will make an other try with no wired USB pad connected, only BT -
@nayok
https://file.ac/7iZSbGHJpz4/xinmo 0003:16C0:05E1.0004:
<inputConfig type="joystick" deviceName="Xin-Mo Xin-Mo Controller" deviceGUID="03000000c0160000e105000001010000" deviceNbAxes="4" deviceNbHats="1" deviceNbButtons="13"> <input name="a" type="button" id="7" value="1" code="311" /> <input name="b" type="button" id="0" value="1" code="304" /> <input name="down" type="axis" id="1" value="-1" code="1" /> <input name="hotkey" type="button" id="4" value="1" code="308" /> <input name="left" type="axis" id="0" value="-1" code="0" /> <input name="pagedown" type="button" id="6" value="1" code="310" /> <input name="pageup" type="button" id="1" value="1" code="305" /> <input name="right" type="axis" id="0" value="1" code="0" /> <input name="select" type="button" id="8" value="1" code="312" /> <input name="start" type="button" id="5" value="1" code="309" /> <input name="up" type="axis" id="1" value="1" code="1" /> <input name="x" type="button" id="2" value="1" code="306" /> <input name="y" type="button" id="3" value="1" code="307" /> </inputConfig>
-
8 bitdo M30
<inputConfig type="joystick" deviceName="8BitDo M30 gamepad" deviceGUID="05000000c82d00005106000000010000" deviceNbAxes="6" deviceNbHats="1" deviceNbButtons="16"> <input name="a" type="button" id="7" value="1" code="311" /> <input name="b" type="button" id="1" value="1" code="305" /> <input name="down" type="axis" id="1" value="1" code="1" /> <input name="hotkey" type="button" id="2" value="1" code="306" /> <input name="l2" type="button" id="8" value="1" code="312" /> <input name="left" type="axis" id="0" value="-1" code="0" /> <input name="pagedown" type="button" id="6" value="1" code="310" /> <input name="pageup" type="button" id="3" value="1" code="307" /> <input name="r2" type="button" id="9" value="1" code="313" /> <input name="right" type="axis" id="0" value="1" code="0" /> <input name="select" type="button" id="10" value="1" code="314" /> <input name="start" type="button" id="11" value="1" code="315" /> <input name="up" type="axis" id="1" value="-1" code="1" /> <input name="x" type="button" id="4" value="1" code="308" /> <input name="y" type="button" id="0" value="1" code="304" /> </inputConfig>
-
Voici ma config via GPIO (boutons hotkey en place)
https://file.ac/NLBMc8j36wU/<inputConfig type="joystick" deviceName="GPIO Controller 1" deviceGUID="15000000010000000100000000010000" deviceNbAxes="2" deviceNbHats="0" deviceNbButtons="9"> <input name="a" type="button" id="1" value="1" code="305" /> <input name="b" type="button" id="0" value="1" code="304" /> <input name="down" type="axis" id="1" value="1" code="1" /> <input name="hotkey" type="button" id="8" value="1" code="316" /> <input name="left" type="axis" id="0" value="-1" code="0" /> <input name="pagedown" type="button" id="5" value="1" code="311" /> <input name="pageup" type="button" id="4" value="1" code="310" /> <input name="right" type="axis" id="0" value="1" code="0" /> <input name="select" type="button" id="6" value="1" code="314" /> <input name="start" type="button" id="7" value="1" code="315" /> <input name="up" type="axis" id="1" value="-1" code="1" /> <input name="x" type="button" id="2" value="1" code="307" /> <input name="y" type="button" id="3" value="1" code="308" /> </inputConfig> <inputConfig type="joystick" deviceName="GPIO Controller 2" deviceGUID="15000000010000000200000000010000" deviceNbAxes="2" deviceNbHats="0" deviceNbButtons="9"> <input name="a" type="button" id="1" value="1" code="305" /> <input name="b" type="button" id="0" value="1" code="304" /> <input name="down" type="axis" id="1" value="1" code="1" /> <input name="hotkey" type="button" id="8" value="1" code="316" /> <input name="left" type="axis" id="0" value="-1" code="0" /> <input name="pagedown" type="button" id="5" value="1" code="311" /> <input name="pageup" type="button" id="4" value="1" code="310" /> <input name="right" type="axis" id="0" value="1" code="0" /> <input name="select" type="button" id="6" value="1" code="314" /> <input name="start" type="button" id="7" value="1" code="315" /> <input name="up" type="axis" id="1" value="-1" code="1" /> <input name="x" type="button" id="2" value="1" code="307" /> <input name="y" type="button" id="3" value="1" code="308" /> </inputConfig>
-
Hello, suite à une clean install depuis la 18.07.xx vers la 6.1.1, mon ensemble joystick arcade n'est pas reconnu comme dans l'OS précédent : appuyer sur un bouton n'a pas déclenché sa détection par Recalbox, il a fallu que je branche un gamepad filaire pour qu'il détecte alors 3 manettes.
Sinon une fois configuré tout est ok.
J'ai un ensemble 2 joueurs XINMO-DUAL-ARCADE (je sais jamais comment ça s'écrit :), branché via un controleur USB sur le Raspberry Pi 3B.
Vu avec @acris sur le Discord qui m'a demandé de poster ici. Par contre je n'ai pas bien compris au-dessus comment faire pour transmettre la conf. -
Hi. I own a 8BitDo SF30 BT Pro pad, i managed to connect it to my RPi3B+ bluetooth with D-input mode (Start+B). See the manual if required. I didn't manage to connect it with the USB cable lol It doesn't work.