RC version - support archives with pad configurations needed

[OyyoDams]

Hi friends,

This applies only if you're currently testing / playing with the beta version (B+, etc.)

As the pad configuration has been upgraded and the old configuration file (aka es_input.cfg) is deprecated and incompatible. That's why you need to reconfigure your pads each time you install the beta.

In order to avoid that before releasing the stable version, we'd like to get as much pad configurations as possible. So if you want to help us, all you have to is very simple:

1. Configure your pad and test it with the beta version. If possible, set hotkey on L3 (or Select if L3 doesn't exist).
2. Make an support archive
3. Post the support archive here and write exactly which pad you have.

If you have configured several pads, please write all the pads you've configured.

Thanks a lot!

[paradadf]

@OyyoDams the pads I configured are:

1. "ELAN TURBO PAD"
2. "PLAYSTATION(R)3 Controller" (This is a Shanwan clone)
3. "8Bitdo SN30 Pro"
4. "8Bitdo NES30 Pro"
5. "8Bitdo SN30 Pro 8Bitdo SN30 Pro" (This is the USB Connection)
6. "8Bitdo NES30 Pro 8Bitdo NES30 Pro" (This is the USB Connection)

https://file.ac/2OKUbcxu76Y/

[olivierdroid92]

@OyyoDams
Based on regular Raspberry Pi 3 B with image dated 2018/11/29
archive : https://file.ac/Dq4keWYhrvY/

Pads:

1. USB Wired pad : iNNEXT PAD (SNES Clone) with Hotkey as SELECET. No L2, No R2, No R3, No L3
2. USB Wired pad : GameStop PS4 Fun Controller (PS4 Clone), L2, R2, L3, R3 and Hotkey mapped

Hope it can help

[olivierdroid92]

@OyyoDams
Bonsoir

Now, please find archive using RPI3 B+ board:
https://file.ac/zPXQZ_aaulg/

Pads:

1. USB Wired pad : iNNEXT PAD (SNES Clone) with Hotkey as SELECET. No L2, No R2, No R3, No L3
2. USB Wired pad : GameStop PS4 Fun Controller (PS4 Clone), L2, R2, L3, R3 and Hotkey mapped

I failed to connect Raspberry internal BT's to 8Bitdo SF30 Pro

[Scavy]

@olivierdroid92
Hi. I own a 8BitDo SF30 BT Pro pad, i managed to connect it to my RPi3B+ bluetooth with D-input mode (Start+B). See the manual if required. I didn't manage to connect it with the USB cable lol It doesn't work.
Regards.

[olivierdroid92]

@Scavy
thanks for feedback.
Yes i've turned on 8bit pad with "B+Start"
When I tried to connect 8bit pad in BT, an other pad was connected in USB Cable.
So I will make an other try with no wired USB pad connected, only BT

[acris]

@nayok
https://file.ac/7iZSbGHJpz4/

xinmo 0003:16C0:05E1.0004:

	<inputConfig type="joystick" deviceName="Xin-Mo Xin-Mo Controller" deviceGUID="03000000c0160000e105000001010000" deviceNbAxes="4" deviceNbHats="1" deviceNbButtons="13">
		<input name="a" type="button" id="7" value="1" code="311" />
		<input name="b" type="button" id="0" value="1" code="304" />
		<input name="down" type="axis" id="1" value="-1" code="1" />
		<input name="hotkey" type="button" id="4" value="1" code="308" />
		<input name="left" type="axis" id="0" value="-1" code="0" />
		<input name="pagedown" type="button" id="6" value="1" code="310" />
		<input name="pageup" type="button" id="1" value="1" code="305" />
		<input name="right" type="axis" id="0" value="1" code="0" />
		<input name="select" type="button" id="8" value="1" code="312" />
		<input name="start" type="button" id="5" value="1" code="309" />
		<input name="up" type="axis" id="1" value="1" code="1" />
		<input name="x" type="button" id="2" value="1" code="306" />
		<input name="y" type="button" id="3" value="1" code="307" />
	</inputConfig>

[acris]

@OyyoDams

8 bitdo M30

	<inputConfig type="joystick" deviceName="8BitDo M30 gamepad" deviceGUID="05000000c82d00005106000000010000" deviceNbAxes="6" deviceNbHats="1" deviceNbButtons="16">
		<input name="a" type="button" id="7" value="1" code="311" />
		<input name="b" type="button" id="1" value="1" code="305" />
		<input name="down" type="axis" id="1" value="1" code="1" />
		<input name="hotkey" type="button" id="2" value="1" code="306" />
		<input name="l2" type="button" id="8" value="1" code="312" />
		<input name="left" type="axis" id="0" value="-1" code="0" />
		<input name="pagedown" type="button" id="6" value="1" code="310" />
		<input name="pageup" type="button" id="3" value="1" code="307" />
		<input name="r2" type="button" id="9" value="1" code="313" />
		<input name="right" type="axis" id="0" value="1" code="0" />
		<input name="select" type="button" id="10" value="1" code="314" />
		<input name="start" type="button" id="11" value="1" code="315" />
		<input name="up" type="axis" id="1" value="-1" code="1" />
		<input name="x" type="button" id="4" value="1" code="308" />
		<input name="y" type="button" id="0" value="1" code="304" />
	</inputConfig>

https://file.ac/57rjp-310WA/

[GDEHON]

Voici ma config via GPIO (boutons hotkey en place)
https://file.ac/NLBMc8j36wU/

<inputConfig type="joystick" deviceName="GPIO Controller 1" deviceGUID="15000000010000000100000000010000" deviceNbAxes="2" deviceNbHats="0" deviceNbButtons="9">
	<input name="a" type="button" id="1" value="1" code="305" />
	<input name="b" type="button" id="0" value="1" code="304" />
	<input name="down" type="axis" id="1" value="1" code="1" />
	<input name="hotkey" type="button" id="8" value="1" code="316" />
	<input name="left" type="axis" id="0" value="-1" code="0" />
	<input name="pagedown" type="button" id="5" value="1" code="311" />
	<input name="pageup" type="button" id="4" value="1" code="310" />
	<input name="right" type="axis" id="0" value="1" code="0" />
	<input name="select" type="button" id="6" value="1" code="314" />
	<input name="start" type="button" id="7" value="1" code="315" />
	<input name="up" type="axis" id="1" value="-1" code="1" />
	<input name="x" type="button" id="2" value="1" code="307" />
	<input name="y" type="button" id="3" value="1" code="308" />
</inputConfig>
<inputConfig type="joystick" deviceName="GPIO Controller 2" deviceGUID="15000000010000000200000000010000" deviceNbAxes="2" deviceNbHats="0" deviceNbButtons="9">
	<input name="a" type="button" id="1" value="1" code="305" />
	<input name="b" type="button" id="0" value="1" code="304" />
	<input name="down" type="axis" id="1" value="1" code="1" />
	<input name="hotkey" type="button" id="8" value="1" code="316" />
	<input name="left" type="axis" id="0" value="-1" code="0" />
	<input name="pagedown" type="button" id="5" value="1" code="311" />
	<input name="pageup" type="button" id="4" value="1" code="310" />
	<input name="right" type="axis" id="0" value="1" code="0" />
	<input name="select" type="button" id="6" value="1" code="314" />
	<input name="start" type="button" id="7" value="1" code="315" />
	<input name="up" type="axis" id="1" value="-1" code="1" />
	<input name="x" type="button" id="2" value="1" code="307" />
	<input name="y" type="button" id="3" value="1" code="308" />
</inputConfig>

[Galere]

Hello, suite à une clean install depuis la 18.07.xx vers la 6.1.1, mon ensemble joystick arcade n'est pas reconnu comme dans l'OS précédent : appuyer sur un bouton n'a pas déclenché sa détection par Recalbox, il a fallu que je branche un gamepad filaire pour qu'il détecte alors 3 manettes.
Sinon une fois configuré tout est ok.
J'ai un ensemble 2 joueurs XINMO-DUAL-ARCADE (je sais jamais comment ça s'écrit :), branché via un controleur USB sur le Raspberry Pi 3B.
Vu avec @acris sur le Discord qui m'a demandé de poster ici. Par contre je n'ai pas bien compris au-dessus comment faire pour transmettre la conf.

[mayangramadan]

Hi. I own a 8BitDo SF30 BT Pro pad, i managed to connect it to my RPi3B+ bluetooth with D-input mode (Start+B). See the manual if required. I didn't manage to connect it with the USB cable lol It doesn't work.