Ports of Recalbox on Pine64 boards need beta-testers

[MikaXII]

@voljega But the A+ war already compatible because its the same hardware of the B+, and about pine board only @Luke_Pine64 and mrfixit do the dev (and there make pretty good work).

[ProfMielPops]

Bonne nouvelle,
Merci aux développeurs @Luke_Pine64, mrfixit2001

[ProfMielPops]

Good news,
Thanks to the developers @Luke_Pine64, mrfixit2001

[Luke_Pine64]

@voljega I see The Pine H64 is a pretty powerful board (somewhere halfways between the Rock64 and RockPro64), but it will be many months before its in a software shape to play games.

Meanwhile, the newest Rock64 image is pretty d**n good performance-wise even without overclocking. A new Pro build is coming too.

[OldGreg]

Hello,
If someone wants to compare :
https://www.hackerboards.com/compare/251,259,244/

The Pine64 : only 2 usb, no wifi, no bluetooth... but more powerfull than raspeberry pi 3b+.
The RockPro64 4GB looks more interesting on the board...

[Luke_Pine64]

@oldgreg Thanks. You need to be a bit careful with those pages comparing boards - I submitted 3 corrections (1x for SOPine, 2x for RockPro64) in the past due to incorrect info.
Then there is question of Linux support for the SOC - which is a whole different story Raw power doesn't matter as much as solid sw support; as things stand it will be a few months before H6 graphics are usable.

[Luke_Pine64]

Just a heads up to those who wish to help test and offer feedback on here.
The RockPro64 image has been labeled release because 1) it tests very well - big performance improvements over beta in Dreamcast, PSP and Nintendo 64 (probably best performance on ARM); 2) We've not had any major complaints, except for some PCIe incompatibility of external NVMe SSDs and other hardware, from many people who tested.
The Rock64 image stays in Beta due to some lingering issues and some missing features (e.g. setting resolution from recalbox config for RA cores, reicast, Mupen and ppsspp) - nothing major.

[Rocpro]

thank you, good job @Luke_Pine64, mrfixit2001.
if you are looking for beta tester^^

[Luke_Pine64]

@rocpro Always, do you have a R64 or Pro board ?

[diamantis42]

hello,

r64 look good, I want to try it and help you for the beta

I'm looking for buy it with 4GB

just 1 question about this beta, the GPIO works? if I put the rock64 in retroflag case, the script for on off button works?

[paradadf]

@diamantis42 I know pine64 is releasing its own case, which will surely get support first. But, if retroflag cases aren’t being supported at this moment (haven’t tested yet to be honest), support will come for it eventually.

[Luke_Pine64]

Hey @diamantis42, I think that @paradadf is pretty spot-on in his response. I imagine, however, that support for the retroflag cases woulnd't be much of an issue - just a case of implementing the script they require in the the build.

[diamantis42]

I looking for it

I think rpi.gpio python library is not the same

But I found this
https://github.com/Leapo/Rock64-R64.GPIO

And the script in recalbox are configure in bcm

The rock64 have same board gpio but not in bcm mode

[Luke_Pine64]

@diamantis42 I also think that mrfixi2001 baked in that work from Leapo into his image.

[ty1911]

Sorry for dragging up an old post, but is there a port for the Pine A64+ ?
I have the Kickstarter version of the Pine64 board with 2GB of ram.
Thanks,
Alan