Recalbox Forum
    • Register
    • Login
    • Search
    • Recent
    • Tags
    • recalbox.com
    • Gitlab repository
    • Documentation
    • Discord

    [RC3] Configuration GPIO

    Manettes/GPIO/Encodeurs
    4
    34
    5245
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • GDEHON
      GDEHON last edited by

      active le GPIO (ON) via recalbox manager
      Ensuite dans l'option des manettes, vérifie que tes boutons sont détectés...
      Si c'est le cas configure boutons et joysticks pour les deux players puis pour chacun d'eux indique GPIO (#1 et #2)
      Sinon redemarre et reçois ce GPIO sur ON dans Recalbox manager
      Chez moi c'est ce GPIO ON dans Recalbox manager qui n'était pas pris en compte... Je ne sais pas pourquoi mais à force ça a fonctionné !

      1 Reply Last reply Reply Quote 0
      • ian57
        ian57 Staff last edited by

        @ViRuS-MaN @GDEHON @acris J'ai fais un test à partir de la RC3 sur Pi3 ce matin :

        0_1554883090388_IMG_20190410_095453.jpg

        mon recalbox.conf :

        # ------------ D2 - GPIO Controllers ------------ #
## GPIO Controllers
## enable controllers on GPIO with mk_arcarde_joystick_rpi (0,1)
controllers.gpio.enabled=1
## mk_gpio arguments, map=1 for one controller, map=1,2 for 2 (map=1,map=1,2)
controllers.gpio.args=map=1,2

        manette free connectée + clavier pour être a peu près dans les mêmes conditions. reboot et ensuite configuration sans soucis de mon panel GPIO

        0_1554882940160_screen5.png

        0_1554882903249_screen4.png

        0_1554882951592_screen1.png

        0_1554882962111_screen2.png

        0_1554882971535_screen3.png

        du coup je vois pas trop d'ou peut venir le soucis...

        "UNIX is basically a simple operating system, but you have to be a genius to understand the simplicity." Dennis Ritchie

        1 Reply Last reply Reply Quote 0
        • GDEHON
          GDEHON last edited by GDEHON

          Pour ma part j'avais le même soucis de non reconnaissance du GPIO...
          Je l'activais par Recalbox Manager mais visiblement ce n'était pas reconnu en ON...
          Apres plusieurs essais et des passages de l'ancienne version (GPIO fonctionnel) à la RC (2 pour moi lors de ce problème), de OFF/ON sur Recalbox Manager, ça a finalement fonctionné...
          Ensuite j'ai fait comme sur tes photos pour configuration et choix du GPIO/player
          Par contre je n'ai pas compris pourquoi ça ne reconnaissait pas le GPIO! Ni ce qui a résolu le problème...

          1 Reply Last reply Reply Quote 0
          • ian57
            ian57 Staff last edited by ian57

            @GDEHON peut être un petit soucis d'enregistrement du recalbox.conf. Il me semble que sur la RC2 j'ai été obligé de l'activé 2x.
            par contre je passe toujours par ssh jamais par l'interface web

            "UNIX is basically a simple operating system, but you have to be a genius to understand the simplicity." Dennis Ritchie

            1 Reply Last reply Reply Quote 0
            • acris
              acris last edited by

              @ian57
              l archive de support de virusman indique que les gpio sont activées

              1 Reply Last reply Reply Quote 0
              • ViRuS-MaN
                ViRuS-MaN last edited by

                oui tout est bon mais si je mets pas le inputconfig de @GDEHON je ne vois pas les 3 manettes , la sans rien changer je vois une manette connecter

                pi3 model B dans bartop PM88 + cles usb 64 Go + manette 8 Bitdo sfc30 pro
                Odroid XU4 + ODroid OGST Console Kit + disc dur 1 to et ma manette 8 Bitdo SFC30 Pro

                1 Reply Last reply Reply Quote 0
                • ian57
                  ian57 Staff last edited by

                  @ViRuS-MaN peux tu poster le inputconfig de @GDEHON stp;;

                  pour que tu puisse comparer voici des eléments. c'est ce que j'ai sur ma config

                  dmesg

                  [    5.681446] mk_arcade_joystick_rpi: loading out-of-tree module taints kernel.
[    5.682964] mk_arcade_joystick_rpi: pad type : 1
[    5.682976] mk_arcade_joystick_rpi: pad type : 1
[    5.682994] GPIO = 4
[    5.682997] GPIO = 17
[    5.682999] GPIO = 27
[    5.683001] GPIO = 22
[    5.683005] GPIO = 10
[    5.683007] GPIO = 9
[    5.683009] GPIO = 25
[    5.683011] GPIO = 24
[    5.683013] GPIO = 23
[    5.683015] GPIO = 18
[    5.683018] GPIO = 15
[    5.683021] GPIO = 14
[    5.683024] GPIO = 2
[    5.683048] GPIO configured for pad0
[    5.683607] input: GPIO Controller 1 as /devices/virtual/input/input1
[    5.683883] mk_arcade_joystick_rpi: pad type : 2
[    5.683885] mk_arcade_joystick_rpi: pad type : 2
[    5.683898] GPIO = 11
[    5.683901] GPIO = 5
[    5.683903] GPIO = 6
[    5.683905] GPIO = 13
[    5.683907] GPIO = 19
[    5.683910] GPIO = 26
[    5.683912] GPIO = 21
[    5.683915] GPIO = 20
[    5.683917] GPIO = 16
[    5.683919] GPIO = 12
[    5.683921] GPIO = 7
[    5.683923] GPIO = 8
[    5.683925] GPIO = 3
[    5.683948] GPIO configured for pad1
[    5.685031] input: GPIO Controller 2 as /devices/virtual/input/input2

                  es_log

                  [2019/04/10 09:37:45.028] (INFO ) : Added unconfigured joystick GPIO Controller 1 (GUID: 15000000010000000100000000010000, instance ID: 0, device index: 0).
[2019/04/10 09:37:45.030] (INFO ) : Added unconfigured joystick GPIO Controller 2 (GUID: 15000000010000000200000000010000, instance ID: 1, device index: 1).

                  es_input.cfg

                  	<inputConfig type="joystick" deviceName="GPIO Controller 2" deviceGUID="15000000010000000200000000010000" deviceNbAxes="2" deviceNbHats="0" deviceNbButtons="9">
		<input name="a" type="button" id="0" value="1" code="304" />
		<input name="b" type="button" id="1" value="1" code="305" />
		<input name="down" type="axis" id="1" value="1" code="1" />
		<input name="hotkey" type="button" id="8" value="1" code="316" />
		<input name="left" type="axis" id="0" value="-1" code="0" />
		<input name="pagedown" type="button" id="5" value="1" code="311" />
		<input name="pageup" type="button" id="4" value="1" code="310" />
		<input name="right" type="axis" id="0" value="1" code="0" />
		<input name="select" type="button" id="6" value="1" code="314" />
		<input name="start" type="button" id="7" value="1" code="315" />
		<input name="up" type="axis" id="1" value="-1" code="1" />
		<input name="x" type="button" id="2" value="1" code="307" />
		<input name="y" type="button" id="3" value="1" code="308" />
	</inputConfig>
	<inputConfig type="joystick" deviceName="DragonRise Inc.   Generic   USB  Joystick  " deviceGUID="03000000790000000600000010010000" deviceNbAxes="5" deviceNbHats="1" deviceNbBu
ttons="12">
		<input name="a" type="button" id="1" value="1" code="289" />
		<input name="b" type="button" id="2" value="1" code="290" />
		<input name="down" type="hat" id="0" value="4" code="16" />
		<input name="hotkey" type="button" id="8" value="1" code="296" />
		<input name="joystick1left" type="axis" id="0" value="-1" code="0" />
		<input name="joystick1up" type="axis" id="1" value="-1" code="1" />
		<input name="joystick2left" type="axis" id="3" value="-1" code="3" />
		<input name="joystick2up" type="axis" id="4" value="-1" code="5" />
		<input name="l2" type="button" id="6" value="1" code="294" />
		<input name="left" type="hat" id="0" value="8" code="16" />
		<input name="pagedown" type="button" id="5" value="1" code="293" />
		<input name="pageup" type="button" id="4" value="1" code="292" />
		<input name="r2" type="button" id="7" value="1" code="295" />
		<input name="right" type="hat" id="0" value="2" code="16" />
		<input name="select" type="button" id="8" value="1" code="296" />
		<input name="start" type="button" id="9" value="1" code="297" />
		<input name="up" type="hat" id="0" value="1" code="16" />
		<input name="x" type="button" id="0" value="1" code="288" />
		<input name="y" type="button" id="3" value="1" code="291" />
	</inputConfig>
	<inputConfig type="joystick" deviceName="GPIO Controller 1" deviceGUID="15000000010000000100000000010000" deviceNbAxes="2" deviceNbHats="0" deviceNbButtons="9">
		<input name="a" type="button" id="0" value="1" code="304" />
		<input name="b" type="button" id="1" value="1" code="305" />
		<input name="down" type="axis" id="1" value="1" code="1" />
		<input name="hotkey" type="button" id="8" value="1" code="316" />
		<input name="left" type="axis" id="0" value="-1" code="0" />
		<input name="pagedown" type="button" id="5" value="1" code="311" />
		<input name="pageup" type="button" id="4" value="1" code="310" />
		<input name="right" type="axis" id="0" value="1" code="0" />
		<input name="select" type="button" id="6" value="1" code="314" />
		<input name="start" type="button" id="7" value="1" code="315" />
		<input name="up" type="axis" id="1" value="-1" code="1" />
		<input name="x" type="button" id="2" value="1" code="307" />
		<input name="y" type="button" id="3" value="1" code="308" />
	</inputConfig>

                  ev_test

                  # evtest
No device specified, trying to scan all of /dev/input/event*
Available devices:
/dev/input/event0:	CHICONY HP Basic USB Keyboard
/dev/input/event1:	GPIO Controller 1
/dev/input/event2:	GPIO Controller 2
/dev/input/event3:	DragonRise Inc.   Generic   USB  Joystick  
Select the device event number [0-3]: 1
Input driver version is 1.0.1
Input device ID: bus 0x15 vendor 0x1 product 0x1 version 0x100
Input device name: "GPIO Controller 1"
Supported events:
  Event type 0 (EV_SYN)
  Event type 1 (EV_KEY)
    Event code 304 (BTN_SOUTH)
    Event code 305 (BTN_EAST)
    Event code 307 (BTN_NORTH)
    Event code 308 (BTN_WEST)
    Event code 310 (BTN_TL)
    Event code 311 (BTN_TR)
    Event code 314 (BTN_SELECT)
    Event code 315 (BTN_START)
    Event code 316 (BTN_MODE)
  Event type 3 (EV_ABS)
    Event code 0 (ABS_X)
      Value      0
      Min       -1
      Max        1
    Event code 1 (ABS_Y)
      Value      0
      Min       -1
      Max        1
Properties:
Testing ... (interrupt to exit)
Event: time 1554895427.113731, type 3 (EV_ABS), code 1 (ABS_Y), value -1
Event: time 1554895427.113731, -------------- SYN_REPORT ------------
Event: time 1554895427.233746, type 3 (EV_ABS), code 1 (ABS_Y), value 0
Event: time 1554895427.233746, -------------- SYN_REPORT ------------
Event: time 1554895427.593773, type 3 (EV_ABS), code 1 (ABS_Y), value 1
Event: time 1554895427.593773, -------------- SYN_REPORT ------------
Event: time 1554895427.693787, type 3 (EV_ABS), code 1 (ABS_Y), value 0
Event: time 1554895427.693787, -------------- SYN_REPORT ------------
Event: time 1554895428.033742, type 3 (EV_ABS), code 0 (ABS_X), value -1
Event: time 1554895428.033742, -------------- SYN_REPORT ------------
Event: time 1554895428.133745, type 3 (EV_ABS), code 0 (ABS_X), value 0
Event: time 1554895428.133745, -------------- SYN_REPORT ------------
Event: time 1554895428.413740, type 3 (EV_ABS), code 0 (ABS_X), value 1
Event: time 1554895428.413740, -------------- SYN_REPORT ------------
Event: time 1554895428.533749, type 3 (EV_ABS), code 0 (ABS_X), value 0
Event: time 1554895428.533749, -------------- SYN_REPORT ------------
Event: time 1554895429.453739, type 1 (EV_KEY), code 305 (BTN_EAST), value 1
Event: time 1554895429.453739, -------------- SYN_REPORT ------------
Event: time 1554895429.553753, type 1 (EV_KEY), code 305 (BTN_EAST), value 0
Event: time 1554895429.553753, -------------- SYN_REPORT ------------
Event: time 1554895429.773753, type 1 (EV_KEY), code 304 (BTN_SOUTH), value 1
Event: time 1554895429.773753, -------------- SYN_REPORT ------------
Event: time 1554895429.893764, type 1 (EV_KEY), code 304 (BTN_SOUTH), value 0
Event: time 1554895429.893764, -------------- SYN_REPORT ------------
Event: time 1554895430.153744, type 1 (EV_KEY), code 311 (BTN_TR), value 1
Event: time 1554895430.153744, -------------- SYN_REPORT ------------
Event: time 1554895430.273760, type 1 (EV_KEY), code 311 (BTN_TR), value 0
Event: time 1554895430.273760, -------------- SYN_REPORT ------------
Event: time 1554895430.513745, type 1 (EV_KEY), code 310 (BTN_TL), value 1
Event: time 1554895430.513745, -------------- SYN_REPORT ------------
Event: time 1554895430.633743, type 1 (EV_KEY), code 310 (BTN_TL), value 0
Event: time 1554895430.633743, -------------- SYN_REPORT ------------
Event: time 1554895430.873777, type 1 (EV_KEY), code 307 (BTN_NORTH), value 1
Event: time 1554895430.873777, -------------- SYN_REPORT ------------
Event: time 1554895430.953753, type 1 (EV_KEY), code 307 (BTN_NORTH), value 0
Event: time 1554895430.953753, -------------- SYN_REPORT ------------
Event: time 1554895431.253738, type 1 (EV_KEY), code 308 (BTN_WEST), value 1
Event: time 1554895431.253738, -------------- SYN_REPORT ------------
Event: time 1554895431.353748, type 1 (EV_KEY), code 308 (BTN_WEST), value 0
Event: time 1554895431.353748, -------------- SYN_REPORT ------------
Event: time 1554895431.733743, type 1 (EV_KEY), code 316 (BTN_MODE), value 1
Event: time 1554895431.733743, -------------- SYN_REPORT ------------
Event: time 1554895431.833740, type 1 (EV_KEY), code 316 (BTN_MODE), value 0
Event: time 1554895431.833740, -------------- SYN_REPORT ------------
Event: time 1554895432.053740, type 1 (EV_KEY), code 314 (BTN_SELECT), value 1
Event: time 1554895432.053740, -------------- SYN_REPORT ------------
Event: time 1554895432.153745, type 1 (EV_KEY), code 314 (BTN_SELECT), value 0
Event: time 1554895432.153745, -------------- SYN_REPORT ------------
Event: time 1554895432.333744, type 1 (EV_KEY), code 315 (BTN_START), value 1
Event: time 1554895432.333744, -------------- SYN_REPORT ------------
Event: time 1554895432.453742, type 1 (EV_KEY), code 315 (BTN_START), value 0
Event: time 1554895432.453742, -------------- SYN_REPORT ------------

                  "UNIX is basically a simple operating system, but you have to be a genius to understand the simplicity." Dennis Ritchie

                  1 Reply Last reply Reply Quote 0
                  • GDEHON
                    GDEHON last edited by GDEHON

                    @ian57 said in [RC3] Configuration GPIO:

                    @GDEHON peut être un petit soucis d'enregistrement du recalbox.conf. Il me semble que sur la RC2 j'ai été obligé de l'activé 2x.
                    par contre je passe toujours par ssh jamais par l'interface web

                    Ok pour le problème d'enregistrement...
                    Par contre pour le ssh c'est putty ou juste winscp ?

                    @acris said in [RC3] Configuration GPIO:

                    @ian57
                    l archive de support de virusman indique que les gpio sont activées

                    Donc ce n'est pas le même soucis que moi c'est ça ?

                    @ian57 said in [RC3] Configuration GPIO:

                    @ViRuS-MaN peux tu poster le inputconfig de @GDEHON stp;;

                    Je l'ai posté [ici]https://forum.recalbox.com/topic/15946/rc-version-support-archives-with-pad-configurations-needed/9)

                    Voici ma config via GPIO (boutons hotkey en place)
                    https://file.ac/NLBMc8j36wU/

                    <inputConfig type="joystick" deviceName="GPIO Controller 1" deviceGUID="15000000010000000100000000010000" deviceNbAxes="2" deviceNbHats="0" deviceNbButtons="9">
<input name="a" type="button" id="1" value="1" code="305" />
	<input name="b" type="button" id="0" value="1" code="304" />
	<input name="down" type="axis" id="1" value="1" code="1" />
	<input name="hotkey" type="button" id="8" value="1" code="316" />
	<input name="left" type="axis" id="0" value="-1" code="0" />
	<input name="pagedown" type="button" id="5" value="1" code="311" />
	<input name="pageup" type="button" id="4" value="1" code="310" />
	<input name="right" type="axis" id="0" value="1" code="0" />
	<input name="select" type="button" id="6" value="1" code="314" />
	<input name="start" type="button" id="7" value="1" code="315" />
	<input name="up" type="axis" id="1" value="-1" code="1" />
	<input name="x" type="button" id="2" value="1" code="307" />
	<input name="y" type="button" id="3" value="1" code="308" />
</inputConfig>
<inputConfig type="joystick" deviceName="GPIO Controller 2" deviceGUID="15000000010000000200000000010000" deviceNbAxes="2" deviceNbHats="0" deviceNbButtons="9">
	<input name="a" type="button" id="1" value="1" code="305" />
	<input name="b" type="button" id="0" value="1" code="304" />
	<input name="down" type="axis" id="1" value="1" code="1" />
	<input name="hotkey" type="button" id="8" value="1" code="316" />
	<input name="left" type="axis" id="0" value="-1" code="0" />
	<input name="pagedown" type="button" id="5" value="1" code="311" />
	<input name="pageup" type="button" id="4" value="1" code="310" />
	<input name="right" type="axis" id="0" value="1" code="0" />
	<input name="select" type="button" id="6" value="1" code="314" />
	<input name="start" type="button" id="7" value="1" code="315" />
	<input name="up" type="axis" id="1" value="-1" code="1" />
	<input name="x" type="button" id="2" value="1" code="307" />
	<input name="y" type="button" id="3" value="1" code="308" />
</inputConfig>
                    1 Reply Last reply Reply Quote 0
                    • ViRuS-MaN
                      ViRuS-MaN last edited by

                      voila mes configuration a moi dans emulationstation configuration desole mais je n arrive pas a faire ce que vous faites pour les afficher

                      pi3 model B dans bartop PM88 + cles usb 64 Go + manette 8 Bitdo sfc30 pro
                      Odroid XU4 + ODroid OGST Console Kit + disc dur 1 to et ma manette 8 Bitdo SFC30 Pro

                      1 Reply Last reply Reply Quote 0
                      • ian57
                        ian57 Staff last edited by

                        @ViRuS-MaN je n'ai rien vu de particulier mis à part que ton es_input ne contient pas les gpio. mais normalement c'est pas un soucis.
                        La version 6.0 sort ce vendredi normalement. je viens de la tester et pas de soucis avec mes GPIO.
                        Attends 2 jours et on refara des tests avec cette nouvelle version

                        "UNIX is basically a simple operating system, but you have to be a genius to understand the simplicity." Dennis Ritchie

                        1 Reply Last reply Reply Quote 1
                        • ViRuS-MaN
                          ViRuS-MaN last edited by

                          c est ce que je vais faire et on veras bien ce que ca va donner , la tester la rc3 c est deja top car elle marche tres bien

                          pi3 model B dans bartop PM88 + cles usb 64 Go + manette 8 Bitdo sfc30 pro
                          Odroid XU4 + ODroid OGST Console Kit + disc dur 1 to et ma manette 8 Bitdo SFC30 Pro

                          1 Reply Last reply Reply Quote 0
                          • ViRuS-MaN
                            ViRuS-MaN last edited by

                            @ian57 j ai refait un sujet [6.0] probleme gpio et j ai toujours ce probleme

                            pi3 model B dans bartop PM88 + cles usb 64 Go + manette 8 Bitdo sfc30 pro
                            Odroid XU4 + ODroid OGST Console Kit + disc dur 1 to et ma manette 8 Bitdo SFC30 Pro

                            1 Reply Last reply Reply Quote 0
                            • First post
                              Last post

                            Want to support us ?

                            97
                            Online

                            99.7k
                            Users

                            28.1k
                            Topics

                            187.1k
                            Posts

                            Copyright © 2021 recalbox.com