Keyboard config: cannot hit "OK"?

[RK.aus.S]

@voljega

Partially success.

With your recommended link above, I have the success that Recalbox now doens't ask for Input Device configuration anymore. That's good. And the joystick and a few buttons do work!

But, the most buttons do still not work, because the Pimoroni Board does obviousely simulate some keystrokes differnet so the Key Mapping does not match in every case.

Can I edit this default Key Mapping (maybe there is a file which I can modify) in order it does match with the key strokes the Pimoroni board simulates?

Regards
Roman

[voljega]

@rk-aus-s For the IPAC they give a windows tool which allows you to modify key mapping for the board, maybe it's the same for Pimoroni ?

[RK.aus.S]

@voljega

Yes, probably the is possible with the Pimoroni PCB as well...

But, to be sure, I would like to install a Recalbox version of about autumn 2016.
Is there any possibility to get such an image, maybe version 4.0.0 or 4.0.1 ?

Or can anybody provide such an image which he has stored somewhere?

As I see, there are currently issues with the Recalbox archive...

[abunille]

@rk-aus-s

Hi again,

https://github.com/recalbox/recalbox-os/releases

next time please open only one topic:

https://forum.recalbox.com/topic/15864/keyboard-konfiguration-kann-zum-schluss-nicht-ok-wählen
Mehrere Posts zum selben Thema zu erstellen ist nicht sehr nett.

[dh04000]

@abunille said in Keyboard config: cannot hit "OK"?:

@rk-aus-s

Hi again,

https://github.com/recalbox/recalbox-os/releases

That is a bad link. Code is now on gitlab, not github. Releases can be found here: https://archive.recalbox.com/

[RK.aus.S]

@abunille said in Keyboard config: cannot hit "OK"?:

next time please open only one topic:
https://forum.recalbox.com/topic/15864/keyboard-konfiguration-kann-zum-schluss-nicht-ok-wählen
Mehrere Posts zum selben Thema zu erstellen ist nicht sehr nett.

I'm sorry for that. I thought to post in english increases my chances to get help. But by then, it was to late to delete my post in german language.

Will not happen again...

[abunille]

@rk-aus-s

very good and much success

@dh04000
cant find the release of 4.0.0 or 4.0.1 on archive.recalbox.com

[RK.aus.S]

Now, I'm totally confused; I installed Recalbox 4.0.1 - and it seems I have the same troubles to hit "OK" on the end of Keyboard configuration as with current version. (How the hell did I configure the Pimoroni PCB 2 years ago?)

But another question: If I do the configuration from this link

https://github.com/recalbox/recalbox-os/wiki/Keyboard-encoder-configuration-(EN)

which @voljega provided, the buttons do work. But in some games, I don't know how to terminate from the game? My Pimoroni PCB emulates the [ESC] and the [ENTER] keystroke, but they have no effect. The [ESC] - button on an additional, secondary connected USB-Keyboard works instead, so I can exit all games if I press [ESC] on this USB-Keyboard. But it's not my intention to leave connected a secondary keyboard all the time.

Maybe all is right and only I am to dumb to use Recalbox...?

PS. I could remove my Pimoroni PCB and connect the Joystick and the Buttons direct via GPIOs, explained here:

https://github.com/recalbox/recalbox-os/wiki/GPIO-controllers-(EN)

But how can I exit/terminate/kill an Arcade game which resists to get exited - if there is no [ESC]-button available?

[voljega]

@rk-aus-s well at least make the effort to read the manual on the wiki and other pages, exiting a game is done by hotkey + start

[RK.aus.S]

Sorry, sometimes you are so absorbed in a problem that you overlook the simplest things. Maybe this has happened to you at some point - that does not always have anything to do with laziness.

Anyway, thank you for the hint.

[voljega]

@rk-aus-s no problem, hope it works fine now, so for future questions, did you have to modify your key bindings or did it work without it ?

and if you had to modify it, did ou use the bindings from the wiki page ?

[RK.aus.S]

@voljega

Will find out now the shortest, easiest possible procedure (for appleying the Pimoroni PCB) und post it here for you / all users respectively.

If there emerge additional questions or issues, I hope I can count on your valueable hints.

Thank you so far.

[RK.aus.S]

@voljega said in Keyboard config: cannot hit "OK"?:

...
And anyway I will support only 6 buttons + start +select + hotkey, no more than that.
...

To understand you right; I can now configure the joystick and 7 buttons: A, B, X, Y, START, SELECT, HOTKEY - no more. I'm slightly confused that you write "...6 buttons + start +select + hotkey" that's all in all 9 buttons (joystick not countet)?

[voljega]

@rk-aus-s on my IPAC I can also configure L1 and R1 in addition to those you mentioned

And yes it's with joystick not counted

[RK.aus.S]

Well, I've now a general procedure to get Recalbox running on a Pimoroni Picade.
Because I think this could be a valueable information, I decided to finish this thread and to open a new and fresh one. So nobody has to read through all the posts in this thread to come to the solution.