@vdeolive
I have found that there is not much you need to do with recalbox to make pandora box arcade controller work. If you have a fresh image that you write to the SD card and then boot raspberry pi, you will then configure your player 1 controller from the controller settings > configure a controller. Then after you have finished and saved that, go back into controller settings > configure a controller, and this time hold one of the buttons on the player 2 side so it detects it and takes you to the controller configuration screen. Then configure all the buttons you want with that player 2 controller and save.
One issue I ran into with configuring the pandora controller was that my player 2 "select" button was not recognized when I try to configure it. So instead I assigned player 2 select to the button in the back of the controller that allows you to get to the exit menu typically when running the pandora box software.
After both players were configured, everything just worked.
@gaetan hi yes i have remapped my controller it also forgets the wifi after resetting the pi its as if your using external memory it forgets everything after a reboot
Wifi do not reconnect after reboot (you have to retype the password everytime and remove the enc one).
Internal Bluetooth frequent disconnect, or massive lag on 8bit do nes 30 pro (SF 30 pro seems to work normally).
tested on 3b + with the img on first post.
@shinomen thanks
@choum said in Testers wanted: major system upgrade (Pi3b+, KODI 17 and much more ...):
Wifi do not reconnect after reboot (you have to retype the password everytime and remove the enc one).
Internal Bluetooth frequent disconnect, or massive lag on 8bit do nes 30 pro (SF 30 pro seems to work normally).
tested on 3b + with the img on first post.
Salut !
Exactement le même souci que @Choum avec le wifi et la manette 8bitdo nes30 pro v2 (firmware 4.1).
Concernant le wifi, nul besoin de retaper le code mais juste désactiver puis réactiver la connexion. C'est pénible mais cela fonctionne. Pour la manette je n'ai pas trouvé comment améliorer la stabilité et cela m'embêterait d'avoir à utiliser un dongle BT...
Bye et merci pour vos projets 
I just wanted to tell you that I tested the image on my Pi3B+ and it booted and the original PS3 sixaxis controller works.
I got a message that there is an update availble (249MB) which I did.
After that it rebootet and showed the same message - and I also did the update (again 249MB... maybe the first update was unsuccessfull or it were really 2 updates with the same size).
After that update the Pi3B+ just boots with a black screen and does nothing.
Maybe someone else have the same issue.
@phil333 you need to edit your recalbox.conf as it said in the first post
Hi,
the PI3 B+ release runs very well when using a PS3 controller (tested with the cable).
Unfortunately I have problems when using my X Box controller (with USB cable). The DPAD often stops working during the gameplay (SNES - Mario Kart/F-Zero). Using the analog stick is OK.
Hope you can fix it.
Cheers
Petit retour pour ma part avec mon pi3:
Boards : Rpi3 B - µSDHC SanDisk 16go classe 10
Power supply: Aukru 5v 3a
Storage: HDD Maxtor 2to + hub USB
Controllers : 8bitdo SFC30 Pro
Case: Retroflag SuperPi Case
Cartes RPi Zéro 2 W - RPi Zéro W - RPi400 - RPi 4/4Gb - RPi 3b - RPi 3b+ - RPi 3 a+
Stockage 16Gb Sandisk, 32Gb Samsung et clé usb 64Gb & 128Gb
2 manettes PS3 Freegun Bluetooth - 2 manettes 8BitDo SF30 Pro Bluetooth
@simba51 said in Testers wanted: major system upgrade (Pi3b+, KODI 17 and much more ...):
- Plus de musique avec mes jeux doom dans le système Prboom alors que l'arborescence de mes fichiers est bonne
Solution : Le répertoire "game-musics" contenant la musique pour chaque ".wad" de prboom est à mettre dans le dossier "save/prboom" de chaque jeu ".wad". Copier également le "prboom.cfg" dans chaque dossier de sauvegarde de vos "*.wad". J'ai eu le même problème et j'ai fait ainsi pour avoir les musiques respectifs de doom et doom2, etc...
@OyyoDams ce n'est pas quelque chose qu'il faudrait vérifier pour la prochaine maj ?
J'ai aussi ce souci (pas encore testé la soluce) mais ce problème semble récurent sur la beta
I get an error message when I try to access network shares in kodi. Could there be something wrong with the Kodi integration?
@gaetan hi yes i have remapped my controller it also forgets the wifi after resetting the pi its as if your using external memory it forgets everything after a reboot
@daz someone as the same kind of issues and doing this solved it : maybe cutting power is the issue, try to repair your usb stick on windows
Hello, I have a problem launching games. They refuse to get started and return to the menu.
If I disable my gpio joystick in 0 and I put my ps3 gamepad the games start ...
Thank you in advance and nice work!
Bonjour,
le post d'origine est toujours à jour ?
Il y a toujours besoin de tester ça ?
ça fait un moment que j'attends kodi 17 pour passer à recalbox, c'est cool !
Ps: est ce qu'il y a une langue officielle pour cette section ? Le forum ? ou ce post ?
Ma config pour la beta:
@nicolas-san le post d'origine est toujours à jour, il y a toujours besoin de testeurs, la langue officielle de ce post is english 
@Gaetan Thanks, I will try it !
(I can't edit my previous post to change to english)
hello
with my Raspberry 3B+ on Recalbox Beta, i see 1200 Mhz for overclock option. Shouldn't it be 1400 Mhz ?
Hi,
the PI3 B+ release runs very well when using a PS3 controller (tested with the cable).
Unfortunately I have problems when using my X Box controller (with USB cable). The DPAD often stops working during the gameplay (SNES - Mario Kart/F-Zero). Using the analog stick is OK.
Hope you can fix it.
Cheers
