Testers wanted: major system upgrade (Pi3b+, KODI 17 and much more ...)

[olivierdroid92]

@Juakin
The easiest way to try a BETA version is to make some run and trials from a fresh copye image. I do not think a dual boot will be a good option.

[Juakin]

I understand that, but I would like to restablish the non beta version, but It doesn´t seems to download from NOOBS, it can't reach the server... It seems the file is unavailable

[BertL1005]

When is the stable version for pi 3b+ ready to download ??

[Gaetan]

@bertl1005 Not yet, wait and see

[daz]

hi ive tried this image & when i try to load games from a memory stick it try's to load then just goes back to the main screen is anyone else having the same problems from external memory

[Gaetan]

@daz did you remap your controller ?

[darksouljedi]

@gaetan
thanks for the link. But it only explain how to activate the GPIO map.
I want to change the GPIO map
I try this in recalbox.conf
controllers.gpio.args=map=5

And in mk_arcade_joystick.conf
options mk_arcade_joystick_rpi map=5 gpio=13,19,26,21,22,20,16,12,6,27,6,17

but the nothing works after rebooting recalbox.

Thanks for your help

[vdeolive]

@shinomen hello.i would like to do the same configuring 2P with my pandora box. I can only have 1p configuration. How did you do please? If i enable x-arcade mode in recalbox.conf, it will works on pandora? Thx

[shinomen]

@vdeolive
I have found that there is not much you need to do with recalbox to make pandora box arcade controller work. If you have a fresh image that you write to the SD card and then boot raspberry pi, you will then configure your player 1 controller from the controller settings > configure a controller. Then after you have finished and saved that, go back into controller settings > configure a controller, and this time hold one of the buttons on the player 2 side so it detects it and takes you to the controller configuration screen. Then configure all the buttons you want with that player 2 controller and save.

One issue I ran into with configuring the pandora controller was that my player 2 "select" button was not recognized when I try to configure it. So instead I assigned player 2 select to the button in the back of the controller that allows you to get to the exit menu typically when running the pandora box software.

After both players were configured, everything just worked.

[daz]

@gaetan hi yes i have remapped my controller it also forgets the wifi after resetting the pi its as if your using external memory it forgets everything after a reboot

[Choum]

Wifi do not reconnect after reboot (you have to retype the password everytime and remove the enc one).
Internal Bluetooth frequent disconnect, or massive lag on 8bit do nes 30 pro (SF 30 pro seems to work normally).
tested on 3b + with the img on first post.

[vdeolive]

@shinomen thanks

[Jayah]

@choum said in Testers wanted: major system upgrade (Pi3b+, KODI 17 and much more ...):

Wifi do not reconnect after reboot (you have to retype the password everytime and remove the enc one).
Internal Bluetooth frequent disconnect, or massive lag on 8bit do nes 30 pro (SF 30 pro seems to work normally).
tested on 3b + with the img on first post.

Salut !

Exactement le même souci que @Choum avec le wifi et la manette 8bitdo nes30 pro v2 (firmware 4.1).
Concernant le wifi, nul besoin de retaper le code mais juste désactiver puis réactiver la connexion. C'est pénible mais cela fonctionne. Pour la manette je n'ai pas trouvé comment améliorer la stabilité et cela m'embêterait d'avoir à utiliser un dongle BT...

Bye et merci pour vos projets

[Phil333]

I just wanted to tell you that I tested the image on my Pi3B+ and it booted and the original PS3 sixaxis controller works.

I got a message that there is an update availble (249MB) which I did.
After that it rebootet and showed the same message - and I also did the update (again 249MB... maybe the first update was unsuccessfull or it were really 2 updates with the same size).

After that update the Pi3B+ just boots with a black screen and does nothing.
Maybe someone else have the same issue.

[Gaetan]

@phil333 you need to edit your recalbox.conf as it said in the first post

[MeisterP]

Hi,
the PI3 B+ release runs very well when using a PS3 controller (tested with the cable).

Unfortunately I have problems when using my X Box controller (with USB cable). The DPAD often stops working during the gameplay (SNES - Mario Kart/F-Zero). Using the analog stick is OK.

Hope you can fix it.

Cheers

[outlaw77230]

Petit retour pour ma part avec mon pi3:

• Obligé d'eteindre et d'appairer ma 8bitdo sf30 pro a chaque lancement de jeu (mais je crois que ce soucis a déjà été remonté)
• Bug "manette" avec certains jeu. A croire qu'on reste bloqué sur des boutons de la manette
• Difficultés d'utilisation du clavier virtuel Amstrad, c64, etc. Les touches ne se valident pas
• Plus de musique avec mes jeux doom dans le système Prboom alors que l'arborescence de mes fichiers est bonne
  Désolé je n'ai pas de compétence Linux. Je peux seulement vous rapporter mes problèmes

[simba51]

@outlaw77230

• Plus de musique avec mes jeux doom dans le système Prboom alors que l'arborescence de mes fichiers est bonne
  Solution : Le répertoire "game-musics" contenant la musique pour chaque ".wad" de prboom est à mettre dans le dossier "save/prboom" de chaque jeu ".wad". Copier également le "prboom.cfg" dans chaque dossier de sauvegarde de vos "*.wad". J'ai eu le même problème et j'ai fait ainsi pour avoir les musiques respectifs de doom et doom2, etc...

[Gaetan]

@simba51 said in Testers wanted: major system upgrade (Pi3b+, KODI 17 and much more ...):

@outlaw77230

• Plus de musique avec mes jeux doom dans le système Prboom alors que l'arborescence de mes fichiers est bonne
  Solution : Le répertoire "game-musics" contenant la musique pour chaque ".wad" de prboom est à mettre dans le dossier "save/prboom" de chaque jeu ".wad". Copier également le "prboom.cfg" dans chaque dossier de sauvegarde de vos "*.wad". J'ai eu le même problème et j'ai fait ainsi pour avoir les musiques respectifs de doom et doom2, etc...

@OyyoDams ce n'est pas quelque chose qu'il faudrait vérifier pour la prochaine maj ?
J'ai aussi ce souci (pas encore testé la soluce) mais ce problème semble récurent sur la beta

[starmagoo]

I get an error message when I try to access network shares in kodi. Could there be something wrong with the Kodi integration?