Recalbox 18.06.27 is out!

[Flavest]

@substring oui avec des rom ajoutées par mes soins tant pis je vais repartir sur une clean instal. Merci pour votre aide en tout cas.

[Lasly]

@substring said in Recalbox 18.06.27 is out!:

@voljega b*mped to .43 in 18-06-27 yes. Would i have forgotten to write it explicitely in the changelog ? It says at least "all libretro cores b*mped"

Je pense effectivement qu'il serait intéressant quand même qu'un petit point soit fait sur les actualisation des CORES et leurs éventuelles nouvelles fonctionnalités/ Romset ou progression diverses.

C'est bien là le coeur de retrogaming et à mon sens le plus important sur recalbox.
S'interresser dans le changelog sur l'OS recalbox en lui même ou les uppates de ES, je comprends, mais je ne pense pas qu'il soit judicieux de ne mettre qu'un laconique " all libretro cores b*mped"

Ça serait passionnant, un post sur le blog à part qui explique les changements, les apports, les bugfixs de ces updates de core !
Je sais par exemple à titre personnel (puisque je follow le Dev) que certain jeux ont été fixés dans le snes_next depuis la dernière release, idem pour Picodrive.. Mais bon un point global pour les utilisateurs apparaitrait être au coeur des attentes des joueurs.

Qu'en penses tu ?

[bilou24fr]

@substring J'ai essayé. Ca marche pas. Le Pi boot même pas.

[OyyoDams]

@bilou24fr tu as bien un 3B et pas un 3B+ ?

[Substring]

@lasly avec un 30-aine de cores mis à jour, sincèrement, on va y passer des jours, donc non.

Pour le coup, la nécessité a surtout été par rapport au netplay

[kelv]

@substring TV 1080p LG LE8500. I've never had issues with the resolution.

[bilou24fr]

@oyyodams Oui c'est un 3B. Ca marchait avec l'image du 20/4. Mais je viens de refaire le téléchargement et maintenant c'est la bonne image (CRC ok). Comprends pas. Bon bref maintenant ça semble OK. J'essayerais ce soir. Là je suis au boulot (je sais c'est pas bien mais shuuuuut :))

[voljega]

@substring said in Recalbox 18.06.27 is out!:

@voljega there is

I don't see it only the one for version 42... Where is it supposed to be and is it possible that the update didn't add the file ?

[acris]

@voljega may be in share_int/roms/fba_libretro ?
https://gitlab.com/recalbox/recalbox/tree/master/package/recalbox-romfs/recalbox-romfs-fba_libretro/roms/fba_libretro/clrmamepro

[Gabbo]

@kelv @substring Hello, I have the same problem. With newest update the Rice emulator shows blackscreen on all N64 games.

I did not change config or anything else.

[voljega]

@acris said in Recalbox 18.06.27 is out!:

@voljega may be in share_int/roms/fba_libretro ?
https://gitlab.com/recalbox/recalbox/tree/master/package/recalbox-romfs/recalbox-romfs-fba_libretro/roms/fba_libretro/clrmamepro

I will double check but for me it clearly doesn't exist and this folder contains files for version 42... Maybe a bug during update

[kelv]

@gabbo @Substring Thx Gaboo good to know I'm not alone in the dark

[kelv]

@Substring another issue I have with the update. I'm using a Microsoft Xbox 360 wired pad.

If somebody could check the file => system/messages log at the support space https://file.ac/dJaeuB5rrBk/

you will see the error messages cocnerning xpad

Jun 28 05:56:34 RECALBOX authpriv.info dropbear[2619]: Child connection from 192.168.1.153:65339
Jun 28 03:56:36 RECALBOX user.debug kernel: [ 553.269273] xpad 1-1.2:1.0: xpad_irq_in - urb shutting down with status: -2
Jun 28 03:56:39 RECALBOX user.debug kernel: [ 555.609284] xpad 1-1.2:1.0: xpad_irq_in - urb shutting down with status: -2
Jun 28 03:56:39 RECALBOX user.debug kernel: [ 555.689259] xpad 1-1.2:1.0: xpad_irq_in - urb shutting down with status: -2
Jun 28 03:56:39 RECALBOX user.debug kernel: [ 555.759355] xpad 1-1.2:1.0: xpad_irq_in - urb shutting down with status: -2
Jun 28 03:56:39 RECALBOX user.debug kernel: [ 555.859287] xpad 1-1.2:1.0: xpad_irq_in - urb shutting down with status: -2
Jun 28 03:56:39 RECALBOX user.debug kernel: [ 555.949290] xpad 1-1.2:1.0: xpad_irq_in - urb shutting down with status: -2
Jun 28 03:56:39 RECALBOX user.debug kernel: [ 556.069334] xpad 1-1.2:1.0: xpad_irq_in - urb shutting down with status: -2
Jun 28 03:56:39 RECALBOX user.debug kernel: [ 556.149349] xpad 1-1.2:1.0: xpad_irq_in - urb shutting down with status: -2
Jun 28 03:56:39 RECALBOX user.debug kernel: [ 556.229388] xpad 1-1.2:1.0: xpad_irq_in - urb shutting down with status: -2
Jun 28 03:56:39 RECALBOX user.debug kernel: [ 556.329311] xpad 1-1.2:1.0: xpad_irq_in - urb shutting down with status: -2
Jun 28 03:56:40 RECALBOX user.debug kernel: [ 556.409283] xpad 1-1.2:1.0: xpad_irq_in - urb shutting down with status: -2
Jun 28 03:56:40 RECALBOX user.debug kernel: [ 556.509268] xpad 1-1.2:1.0: xpad_irq_in - urb shutting down with status: -2
Jun 28 03:56:40 RECALBOX user.debug kernel: [ 556.589246] xpad 1-1.2:1.0: xpad_irq_in - urb shutting down with status: -2
Jun 28 03:56:40 RECALBOX user.debug kernel: [ 556.709247] xpad 1-1.2:1.0: xpad_irq_in - urb shutting down with status: -2
Jun 28 03:56:40 RECALBOX user.debug kernel: [ 556.829255] xpad 1-1.2:1.0: xpad_irq_in - urb shutting down with status: -2
Jun 28 03:56:40 RECALBOX user.debug kernel: [ 556.889247] xpad 1-1.2:1.0: xpad_irq_in - urb shutting down with status: -2

thx!!

[Substring]

@kelv the rice problem is confirmed by ither people. You can meanwhile switch to gliden64

[Substring]

@kelv is there anything wrong happening with your pad beside the.logs (tjat i've always had myself)

[kelv]

@substring I found the issue in the logs.

Go to system/logs/es_launch_stdout.log at https://file.ac/dJaeuB5rrBk/ there is an error message stating ERROR: Failed to get display size

UI-Console: using Video plugin: 'Mupen64Plus OpenGL Video Plugin by Rice' v2.0.0
UI-Console: using Audio plugin: 'Mupen64Plus SDL Audio Plugin' v2.5.0
Input: Using auto-config file at: '/recalbox/share/system/configs/mupen64/InputAutoCfg.ini'
UI-Console: using Input plugin: 'Mupen64Plus SDL Input Plugin' v2.5.0
UI-Console: using RSP plugin: 'Hacktarux/Azimer High-Level Emulation RSP Plugin' v2.5.0
Input: 1 SDL joysticks were found.
Input: Using auto-config file at: '/recalbox/share/system/configs/mupen64/InputAutoCfg.ini'
Input: N64 Controller #1: Using auto-config with SDL joystick 0 ('Microsoft X-Box 360 pad')
Input: 1 controller(s) found, 1 plugged in and usable in the emulator
Input: Rumble activated on N64 joystick #1
Input Warning: Couldn't open rumble support for joystick #2
Input Warning: Couldn't open rumble support for joystick #3
Input Warning: Couldn't open rumble support for joystick #4
Input: Mupen64Plus SDL Input Plugin version 2.5.0 initialized.
ERROR: Failed to get display size
Video: Disabled SSE processing.
Video: ROM (CRC 1fa83dd4191e1e02-45) not found in INI file
Video: Enabled hacks for game: 'THE LEGEND OF ZELDA'
Video: Initializing OpenGL Device Context.
Core: Setting 16-bit video mode: 0x0
Video Warning: Failed to set GL_SWAP_CONTROL to 0. (it's 16)
Video Warning: Failed to set GL_DEPTH_SIZE to 16. (it's 24)
Video: Using OpenGL: Broadcom - VideoCore IV HW : OpenGL ES 2.0
Audio: Initializing SDL audio subsystem...

[kelv]

@substring I may say that I'm noticing a bit of input lag like.

[Substring]

@kelv thank you very much for this feedback ! I'll dig this once back home

[MilesCW]

Guys, don't be stingy with the change log and add more details to the blog please.

Just found out that the Daphne Emulator has been added. Nice!

[lmerckx]

More information about Daphne can be found on Wiki:
https://github.com/recalbox/recalbox-os/wiki/Daphne-(EN)