Posts made by noxx

i know, but i dont know how i can install wakeonlan

Hello

how can i add a WOL script to Recalbox?
I need a solution to wake my game-server, if i start
recalbox or a moonlight-game.

regard

Wirklich Kodi 16?

hello

is it possible to disable the Network-(card) if the screensaver is ON?

Background: The PI runs 24hours. My GameServer for Moonlight dont go in
Standby if the PIs is available over network.

Screesaver off -> Network On
Screensaver on -> Network Off
Screensaver off -> Network On (and perhaps an WOL to my Server)

@acris said in recalbox x86/x64:

Check : https://github.com/recalbox/recalbox-os/wiki/Board-Compatibility-(EN)

x64 without moonlight?

hello

i found a config for XBOX360 Controller:

abs_x = 0
abs_y = 1
abs_z = 2
abs_rx = 3
abs_ry = 4
abs_rz = 5
abs_deadzone = 0
abs_dpad_x = 16
abs_dpad_y = 17
reverse_x = false
reverse_y = true
reverse_rx = false
reverse_ry = true
reverse_dpad_x = false
reverse_dpad_y = false
btn_north = 308
btn_east = 305
btn_south = 304
btn_west = 307
btn_select = 314
btn_start = 315
btn_mode = 316
btn_thumbl = 317
btn_thumbr = 318
btn_tl = 310
btn_tr = 311
btn_tr = 311
btn_tr2 = 313
btn_dpad_up = 294
btn_dpad_down = 295
btn_dpad_left = 296
btn_dpad_right = 297

if i change my mappingP1.conf and mappingP2.conf
Recalbox overwrite this every time
can anyone help`?

Same Problem with Moonlight
A/B and X/Y are inverted

Hello

In GFE i added 4 Games. In Steam i have 6 Games in my library. After Init i have all my 6 Steam Games in Moonlight
How can disable Steam Games? I want only the Games in my Moonlight list, that i added manual in GFE.

Regard

is there no editor available. i mean a tool like ember media manager (for kodi movies eg) if you know
it.

Hallo

habe nun endlich Moonlight am laufen. Bei einigen Spielen zeigt
Moonlight keine Beschreibung und kein Cover an.
Kann man das manuell editieren?

Habs mit dem Universal Scraper XML probiert, aber da funktionierte
nicht.

OK, ab wann soll das kommen?

kann man das nicht irgendwie in der InputAutoCfg.ini einstellen, welcher Controller PLAYER1 und welcher PLAYER2 ist?

[Xbox Gamepad (userspace driver)]
plugged = True
plugin = 2
AnalogDeadzone = 4096,4096
AnalogPeak = 32768,32768
Mempak switch = 
Rumblepak switch = 
mouse = False
A Button = button(1)
B Button = button(3)
C Button D = axis(3+)
C Button L = axis(2-)
C Button R = button(0) axis(2+)
C Button U = axis(3-) button(2)
DPad D = hat(0 Down)
DPad L = hat(0 Left)
DPad R = hat(0 Right)
DPad U = hat(0 Up)
L Trig = button(4)
R Trig = button(5)
Start = button(9)
X Axis = axis(0-,0+)
Y Axis = axis(1-,1+)
Z Trig = button(6)

[Logitech Logitech RumblePad 2 USB]
plugged = True
plugin = 2
AnalogDeadzone = 4096,4096
AnalogPeak = 32768,32768
Mempak switch = 
Rumblepak switch = 
mouse = False
A Button = button(2)
B Button = button(3)
C Button D = axis(3+)
C Button L = axis(2-)
C Button R = button(1) axis(2+)
C Button U = axis(3-) button(0)
DPad D = hat(0 Down)
DPad L = hat(0 Left)
DPad R = hat(0 Right)
DPad U = hat(0 Up)
L Trig = button(4)
R Trig = button(5)
Start = button(9)
X Axis = axis(0-,0+)
Y Axis = axis(1-,1+)
Z Trig = button(6)

Problem erkannt, aber keine Lösung.

Der N64 Emu vertauscht die Controller. In Recalbox ist Xbox = Controller 1 und Logitech = Controller 2.
In Emu umgekehrt.

Habe das hier gefunden
https://m.reddit.com/r/RetroPie/comments/4b5idq/change_controller_order/

Da hat einer ein anlockte ähnliches Problem

no,? what is the reason, that i add my XBOX Controller to Controller 1 and
in N64-Emulator is it Controller 2?

here under Controller Settings
https://github.com/recalbox/recalbox-os/blob/master/wiki/images/settings.jpg
is XBOX = 1
LOGITECH = 2

Edit
Found this
https://m.reddit.com/r/RetroPie/comments/4b5idq/change_controller_order/

ok, i try it, background is, in RCB is
XBOX = Controller 1
LOGITECH = Controller 2

In N64 Emus, is
XBOX = Player 2
LOGITECH = Player 1

hello

RCB recognize my controller as
0 LOGITECH
1 XBOX 360

is it possible to change the ordner to
0 XBOX 360
1 LOGITECH

?

Hallo,

ich nutze 2 Controller

0 Logitech Rumble
1 XBOX 360 Controller

Mit 0 und 1 werden die im Setup gezeichnet

Einzeln laufen beide gut. Es leuchtet beim XBOX Controller immer die Lampe1, egal
ob ich den für Controller1 oder Controller2 einstelle.

Ich möchte, das der XBOX Controller bei Standard Controller für Player 1 ist. Der Logitech für Player 2.

So, starte ich zb nun MarioKart64 und möchte mit dem XBOX Controller spielen, funktioniert das
ganze bis zum Punkt, wo ich die Spielfigur wählen kann. In dem Menü reagiert der XBOX Controller
nicht. Logitech geht, aber der ist eigentlich Player 2

Liegt evtl daran, in welcher Reihenfolge die erkannt werden? Kann man Recalbox so einstellen:

0 XBOX 360 Controller
1 Logitech Rumble

hier meine Config

# -------------- D - Controllers ----------------- #
# Enable support for standard bluetooth controllers
controllers.bluetooth.enabled=1


## Please enable only one of these
# -------------- D1 - PS3 Controllers ------------ #
##Enable PS3 controllers support
controllers.ps3.enabled=0
## Choose an driver between official, shanwan and gasia if you have dualshock clones (official,shanwan,gasia)
controllers.ps3.driver=0


# ------------ D2 - XBOX Controllers ------------ #
## Xbox controllers are already supported, but xboxdrv can solve some compatibility issues 
## Enable xboxdrv driver, disable this if you enabled ps3 controllers (0,1)
controllers.xboxdrv.enabled=1
## Set the amount of controllers to use with xboxdrv (0..4)
controllers.xboxdrv.nbcontrols=1


# ------------ D3 - GPIO Controllers ------------ #
## GPIO Controllers
## enable controllers on GPIO with mk_arcarde_joystick_rpi (0,1)
controllers.gpio.enabled=0
## mk_gpio arguments, map=1 for one controller, map=1,2 for 2 (map=1,map=1,2)
controllers.gpio.args=map=1,2


## DB9 Controllers
## Enable DB9 drivers for atari, megadrive, amiga controllers (0,1)
controllers.db9.enabled=0
## db9 arguments
controllers.db9.args=map=1

## Gamecon controllers
## Enable gamecon controllers, for nes, snes psx (0,1) 
controllers.gamecon.enabled=0
## gamecon_args
controllers.gamecon.args=map=1

## XGaming's XArcade Tankstik and other compatible devices
controllers.xarcade.enabled=1

# dmesg | grep usb
[    0.150273] usbcore: registered new interface driver usbfs
[    0.150358] usbcore: registered new interface driver hub
[    0.150457] usbcore: registered new device driver usb
[    0.300980] usbcore: registered new interface driver smsc95xx
[    0.702170] dwc_otg 3f980000.usb: DWC OTG Controller
[    0.702206] dwc_otg 3f980000.usb: new USB bus registered, assigned bus number 1
[    0.702238] dwc_otg 3f980000.usb: irq 32, io mem 0x00000000
[    0.702484] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    0.702499] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.702512] usb usb1: Product: DWC OTG Controller
[    0.702524] usb usb1: Manufacturer: Linux 4.1.19-v7 dwc_otg_hcd
[    0.702536] usb usb1: SerialNumber: 3f980000.usb
[    0.703920] usbcore: registered new interface driver usb-storage
[    0.838598] usbcore: registered new interface driver usbhid
[    0.838603] usbhid: USB HID core driver
[    1.078236] usb 1-1: new high-speed USB device number 2 using dwc_otg
[    1.278474] usb 1-1: New USB device found, idVendor=0424, idProduct=9514
[    1.278489] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.558282] usb 1-1.1: new high-speed USB device number 3 using dwc_otg
[    1.668905] usb 1-1.1: New USB device found, idVendor=0424, idProduct=ec00
[    1.668946] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.733433] smsc95xx 1-1.1:1.0 eth0: register 'smsc95xx' at usb-3f980000.usb-1.1, smsc95xx USB 2.0 Ethernet, b8:27:eb:fb:35:27
[    1.760214] usbcore: registered new interface driver brcmfmac
[    1.838285] usb 1-1.2: new low-speed USB device number 4 using dwc_otg
[    1.992194] usb 1-1.2: New USB device found, idVendor=046d, idProduct=c218
[    1.992230] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    1.992244] usb 1-1.2: Product: Logitech RumblePad 2 USB
[    1.992256] usb 1-1.2: Manufacturer: Logitech
[    2.248249] usb 1-1.3: new full-speed USB device number 5 using dwc_otg
[    2.371783] usb 1-1.3: New USB device found, idVendor=045e, idProduct=028e
[    2.371800] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    2.371813] usb 1-1.3: Product: Controller
[    2.371826] usb 1-1.3: Manufacturer: ©Microsoft Corporation
[    2.371839] usb 1-1.3: SerialNumber: 1316F0B
[    2.437348] input: Microsoft X-Box 360 pad as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.3/1-1.3:1.0/input/input0
[    2.437504] usbcore: registered new interface driver xpad
[    2.441075] input: Logitech Logitech RumblePad 2 USB as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.2/1-1.2:1.0/0003:046D:C218.0001/input/input1
[    2.441360] logitech 0003:046D:C218.0001: input,hidraw0: USB HID v1.10 Joystick [Logitech Logitech RumblePad 2 USB] on usb-3f980000.usb-1.2/input0
[    4.291761] usbcore: deregistering interface driver xpad
#

Really impossible?

Thats not possible?

Gpio buttons as controller 1
Hotkey, Menu1, Menu2

USB Gamepad AS controller 2
No Hotkey
No Select in mainmenu, only in Emus
No Start in mainmenu, only in Emus

USB Gamepad AS controller 3
same AS controller 2

Hello
How can i disable the both menu buttons in the controller (Start/select)?

I want add 3 gpio buttons for Hotkey, Settings (start) and Gamesettings (select).
The Start and Select Buttons on the controller should only available in the Emus, not in the mainmenu.

Is this possible?