Recalbox Forum

gnubit

@acris thanks for the info, any idea why it was dropped for this architecture ?

gnubit

@jorgemagana thanks, I looked in the ports folder and its not there, I also copied the cavestory folder to recalbox.local/recalbox/share/roms/ports and it was not seen by emulation station. Any body else has cavestory working on x32_64 with rb ver 7.0.1 ?

gnubit

Thanks for a great release, I am trying to install cavestory on rb 7.01, but the cavestory folder is missing in the roms directory. I have looked in both recalbox.local/recalbox/share/roms and
recalbox.local/recalbox/share_init/roms. Has it been moved ? (i do remember it there in rb 6.1x)

Does this no longer apply for x86_64?
https://recalbox.gitbook.io/documentation/emulators/portages/cavestory

Thanks and keep safe.

gnubit

@garmadon thanks for the detail and extra info.

@paradadf much appreciated for looking into it.

gnubit

Re: X64 version and x68000

Was this ever resolved ? Just that GW & X68000 are not working for me with recalbox 6.1 x86_64
The last version I used with success with theses emulators was 18.06 (I skipped ver 6.0 as cec hdmi wasn`t working on x86_64)

X68000
es_launch_stdout.log

[
{ "code":1, "width":1920, "height":1080 }
]
[
{ "code":1, "width":1920, "height":1080 }
]
/usr/bin/retroarch -L /usr/lib/libretro/px68k_libretro.so --config /recalbox/share/system/configs/retroarch/retroarchcustom.cfg --appendconfig /recalbox/share/system/configs/retroarch/x68000.cfg|/recalbox/share/system/configs/retroarch/retroarchcustom.cfg.overrides.cfg /recalbox/share/roms/x68000/Final Fight.m3u
running command: /usr/bin/retroarch -L /usr/lib/libretro/px68k_libretro.so --config /recalbox/share/system/configs/retroarch/retroarchcustom.cfg --appendconfig /recalbox/share/system/configs/retroarch/x68000.cfg|/recalbox/share/system/configs/retroarch/retroarchcustom.cfg.overrides.cfg /recalbox/share/roms/x68000/Final Fight.m3u

es_launch_stderr.log

sh: xdg-screensaver: command not found
ALSA lib seq_hw.c:466:(snd_seq_hw_open) open /dev/snd/seq failed: No such file or directory
double free or corruption (fasttop)

last few lines snippet of /recalbox/share/system/.emulationstation/es_log.txt

[2019/10/11 22:37:14.803] (INFO ) : Attempting to launch game...
[2019/10/11 22:37:14.803] (INFO ) : Shutting down SDL AUDIO
[2019/10/11 22:37:15.185] (INFO ) : Available and configurated : Logitech Gamepad F710
[2019/10/11 22:37:15.185] (INFO ) : Available and configurated : Logitech Gamepad F710
[2019/10/11 22:37:15.185] (INFO ) : No config for player 0
[2019/10/11 22:37:15.185] (INFO ) : So i set Logitech Gamepad F710 for player 0
[2019/10/11 22:37:15.185] (INFO ) : No config for player 1
[2019/10/11 22:37:15.185] (INFO ) : So i set Logitech Gamepad F710 for player 1
[2019/10/11 22:37:15.185] (INFO ) : No config for player 2
[2019/10/11 22:37:15.185] (INFO ) : No config for player 3
[2019/10/11 22:37:15.185] (INFO ) : No config for player 4
[2019/10/11 22:37:15.185] (INFO ) : Configure emulators command : -p1index 0 -p1guid 030000006d0400001fc2000005030000 -p1name "Logitech Gamepad F710" -p1nbaxes 4 -p1devicepath /dev/input/event5 -p2index 1 -p2guid 030000006d0400001fc2000005030000 -p2name "Logitech Gamepad F710" -p2nbaxes 4 -p2devicepath /dev/input/event6 
[2019/10/11 22:37:15.185] (INFO ) : Controllers config : -p1index 0 -p1guid 030000006d0400001fc2000005030000 -p1name "Logitech Gamepad F710" -p1nbaxes 4 -p1devicepath /dev/input/event5 -p2index 1 -p2guid 030000006d0400001fc2000005030000 -p2name "Logitech Gamepad F710" -p2nbaxes 4 -p2devicepath /dev/input/event6 
[2019/10/11 22:37:15.225] (INFO ) : 	python /usr/lib/python2.7/site-packages/configgen/emulatorlauncher.pyc -p1index 0 -p1guid 030000006d0400001fc2000005030000 -p1name "Logitech Gamepad F710" -p1nbaxes 4 -p1devicepath /dev/input/event5 -p2index 1 -p2guid 030000006d0400001fc2000005030000 -p2name "Logitech Gamepad F710" -p2nbaxes 4 -p2devicepath /dev/input/event6  -system x68000 -rom /recalbox/share/roms/x68000/Final\ Fight.m3u -emulator default -core default -ratio auto 
[2019/10/11 22:37:16.893] (WARN!) : ...launch terminated with nonzero exit code 64000!
[2019/10/11 22:37:16.893] (INFO ) : Creating surface...
[2019/10/11 22:37:16.922] (INFO ) : Created window successfully.
[2019/10/11 22:37:17.040] (INFO ) : Added known joystick Logitech Gamepad F710 (instance ID: 0, device index: 0)
[2019/10/11 22:37:17.041] (INFO ) : Added known joystick Logitech Gamepad F710 (instance ID: 1, device index: 1)
[2019/10/11 22:37:17.176] (INFO ) : SDL AUDIO Initialized
[2019/10/11 22:37:17.176] (INFO ) : playing

GW
es_launch_stdout.log

[
{ "code":1, "width":1920, "height":1080 }
]
[
{ "code":1, "width":1920, "height":1080 }
]
/usr/bin/retroarch -L /usr/lib/libretro/gw_libretro.so --config /recalbox/share/system/configs/retroarch/retroarchcustom.cfg --appendconfig /recalbox/share/system/configs/retroarch/gw.cfg|/recalbox/share/system/configs/retroarch/retroarchcustom.cfg.overrides.cfg /recalbox/share/roms/gw/Donkey Kong II (Nintendo, Multi Screen).mgw
running command: /usr/bin/retroarch -L /usr/lib/libretro/gw_libretro.so --config /recalbox/share/system/configs/retroarch/retroarchcustom.cfg --appendconfig /recalbox/share/system/configs/retroarch/gw.cfg|/recalbox/share/system/configs/retroarch/retroarchcustom.cfg.overrides.cfg /recalbox/share/roms/gw/Donkey Kong II (Nintendo, Multi Screen).mgw
GW_VERSION	67075
now	function: 0x2bf8690
splith	function: 0x2bf9ad0
playsound	function: 0x2bf8310
setzoom	function: 0x2bf8980
newsound	function: 0x2bf8210
GW_GITHASH	8ffdef58cf5a555451581c6cf7a8bee33b0ed07c
GW_PATCH	3.0
issoundactive	function: 0x2bf8510
stopsounds	function: 0x2bf8390
inputstate	function: 0x2bf8a70
GW_VERSIONSTR	1.6.3
loadunit	function: 0x2fbdeb0
GW_MINOR	6.0
splitv	function: 0x2bf9b00
loadbin	function: 0x2bf8af0
tobject	table: 0x2fc0590
init	function: 0x2fc0140
pausesounds	function: 0x2bf8410
render	function: 0x30ba530
hand	image@0x2fbc5d8
splittime	function: 0x2bf8700
snes	image@0x2fc0388
newimage	function: 0x2bf8160
savevalue	function: 0x2bf8880
resumesounds	function: 0x2bf8490
log	function: 0x2bfc2e0
GW_MAJOR	1.0
round	function: 0x2bf8650
newtimer	function: 0x2bf8290
inttostr	function: 0x2bf8780
loadbs	function: 0x2bf8b60
iszoomed	function: 0x2bf89f0
randomize	function: 0x2bf8590
loadvalue	function: 0x2bf8800
random	function: 0x2bf8610
setbackground	function: 0x2bf8900

es_launch_stderr.log

Failed to open /recalbox/share/saves/gw/Donkey Kong II (Nintendo, Multi Screen).srm: No such file or directory
ALSA lib seq_hw.c:466:(snd_seq_hw_open) open /dev/snd/seq failed: No such file or directory
double free or corruption (fasttop)

last few lines snippet of /recalbox/share/system/.emulationstation/es_log.txt

[2019/10/11 23:00:02.793] (INFO ) : Attempting to launch game...
[2019/10/11 23:00:02.793] (INFO ) : Shutting down SDL AUDIO
[2019/10/11 23:00:03.225] (INFO ) : Available and configurated : Logitech Gamepad F710
[2019/10/11 23:00:03.225] (INFO ) : Available and configurated : Logitech Gamepad F710
[2019/10/11 23:00:03.225] (INFO ) : No config for player 0
[2019/10/11 23:00:03.225] (INFO ) : So i set Logitech Gamepad F710 for player 0
[2019/10/11 23:00:03.225] (INFO ) : No config for player 1
[2019/10/11 23:00:03.225] (INFO ) : So i set Logitech Gamepad F710 for player 1
[2019/10/11 23:00:03.225] (INFO ) : No config for player 2
[2019/10/11 23:00:03.225] (INFO ) : No config for player 3
[2019/10/11 23:00:03.225] (INFO ) : No config for player 4
[2019/10/11 23:00:03.225] (INFO ) : Configure emulators command : -p1index 0 -p1guid 030000006d0400001fc2000005030000 -p1name "Logitech Gamepad F710" -p1nbaxes 4 -p1devicepath /dev/input/event5 -p2index 1 -p2guid 030000006d0400001fc2000005030000 -p2name "Logitech Gamepad F710" -p2nbaxes 4 -p2devicepath /dev/input/event6 
[2019/10/11 23:00:03.225] (INFO ) : Controllers config : -p1index 0 -p1guid 030000006d0400001fc2000005030000 -p1name "Logitech Gamepad F710" -p1nbaxes 4 -p1devicepath /dev/input/event5 -p2index 1 -p2guid 030000006d0400001fc2000005030000 -p2name "Logitech Gamepad F710" -p2nbaxes 4 -p2devicepath /dev/input/event6 
[2019/10/11 23:00:03.266] (INFO ) : 	python /usr/lib/python2.7/site-packages/configgen/emulatorlauncher.pyc -p1index 0 -p1guid 030000006d0400001fc2000005030000 -p1name "Logitech Gamepad F710" -p1nbaxes 4 -p1devicepath /dev/input/event5 -p2index 1 -p2guid 030000006d0400001fc2000005030000 -p2name "Logitech Gamepad F710" -p2nbaxes 4 -p2devicepath /dev/input/event6  -system gw -rom /recalbox/share/roms/gw/Donkey\ Kong\ II\ \(Nintendo,\ Multi\ Screen\).mgw -emulator default -core default -ratio auto 
[2019/10/11 23:00:04.838] (WARN!) : ...launch terminated with nonzero exit code 64000!
[2019/10/11 23:00:04.838] (INFO ) : Creating surface...
[2019/10/11 23:00:04.869] (INFO ) : Created window successfully.
[2019/10/11 23:00:04.986] (INFO ) : Added known joystick Logitech Gamepad F710 (instance ID: 0, device index: 0)
[2019/10/11 23:00:04.986] (INFO ) : Added known joystick Logitech Gamepad F710 (instance ID: 1, device index: 1)
[2019/10/11 23:00:05.110] (INFO ) : SDL AUDIO Initialized
[2019/10/11 23:00:05.110] (INFO ) : playing

Cheers thanks.

gnubit

@strodown said in 6.1 x86_64 will not boot into GUI after update from 6.0:

@elnino @Enigmatic_One

on PC it is necessary to make a fresh installation!

several boot issues were raised, to ensure a total boot
you have to login in ssh to your Recalbox:
https://recalbox.gitbook.io/tutorials/filesystem/root-access-on-terminal
then once connect type these commands:
mount -o remount, rw /
and
mv /etc/init.d/S03splash /etc/init.d/splash
after that
reboot
and everything should work at best

@strodown thanks for the tips, I had the same issue with a fresh install of 6.1 on a i5-8400T with iGPU.

gnubit

@bkg2k

https://forum.recalbox.com/topic/16576/february-2019-beta-version/18

Issue still persists on latest build, Kodi also fails to start on x64 image (both by selecting it form menu and shortcut button Y). No error on es_launch_stdout.log

/recalbox/share/system/logs/es_launch_stderr.log

# cat es_launch_stderr.log 
usage: emulatorlauncher.pyc [-h] [-p1index P1INDEX] [-p1guid P1GUID]
                            [-p1name P1NAME] [-p1devicepath P1DEVICEPATH]
                            [-p1nbaxes P1NBAXES] [-p2index P2INDEX]
                            [-p2guid P2GUID] [-p2name P2NAME]
                            [-p2devicepath P2DEVICEPATH] [-p2nbaxes P2NBAXES]
                            [-p3index P3INDEX] [-p3guid P3GUID]
                            [-p3name P3NAME] [-p3devicepath P3DEVICEPATH]
                            [-p3nbaxes P3NBAXES] [-p4index P4INDEX]
                            [-p4guid P4GUID] [-p4name P4NAME]
                            [-p4devicepath P4DEVICEPATH] [-p4nbaxes P4NBAXES]
                            [-p5index P5INDEX] [-p5guid P5GUID]
                            [-p5name P5NAME] [-p5devicepath P5DEVICEPATH]
                            [-p5nbaxes P5NBAXES] -system SYSTEM [-rom ROM]
                            [-emulator EMULATOR] [-core CORE] [-ratio RATIO]
                            [-demo DEMO] [-netplay NETPLAY]
                            [-netplay_ip NETPLAY_IP]
                            [-netplay_port NETPLAY_PORT] [-hash HASH]
                            [-extra EXTRA]
emulatorlauncher.pyc: error: unrecognized arguments: ��
#

Thanks again team recalbox.

gnubit

@bkg2k

https://forum.recalbox.com/topic/16576/february-2019-beta-version/17

F710 controller working on latest beta thanks (recalbox.2019-02-23-beta.x86_64.)

gnubit

	</inputConfig>
	<inputConfig type="joystick" deviceName="Logitech Gamepad F710" deviceGUID="030000006d0400001fc2000005030000" deviceNbAxes="4" deviceNbHats="1" deviceNbButtons="13">
		<input name="a" type="button" id="1" value="1" code="305" />
		<input name="b" type="button" id="0" value="1" code="304" />
		<input name="down" type="hat" id="0" value="4" code="16" />
		<input name="hotkey" type="button" id="10" value="1" code="316" />
		<input name="joystick1left" type="axis" id="0" value="-1" code="0" />
		<input name="joystick1up" type="axis" id="1" value="-1" code="1" />
		<input name="joystick2left" type="axis" id="2" value="-1" code="3" />
		<input name="joystick2up" type="axis" id="3" value="-1" code="4" />
		<input name="l2" type="button" id="6" value="1" code="312" />
		<input name="left" type="hat" id="0" value="8" code="16" />
		<input name="pagedown" type="button" id="5" value="1" code="311" />
		<input name="pageup" type="button" id="4" value="1" code="310" />
		<input name="r2" type="button" id="7" value="1" code="313" />
		<input name="right" type="hat" id="0" value="2" code="16" />
		<input name="select" type="button" id="8" value="1" code="314" />
		<input name="start" type="button" id="9" value="1" code="315" />
		<input name="up" type="hat" id="0" value="1" code="16" />
		<input name="x" type="button" id="3" value="1" code="308" />
		<input name="y" type="button" id="2" value="1" code="307" />
	</inputConfig>
</inputList>

gnubit

Another issue (same hardware as previous post), this time with libcec not creating /dev/tty* for my usb cec adaptor. Possible udev issue (missing rule)?
I have had this adaptor working on the last stable on another box.
Thanks again.

# dmesg | grep -i cec
[    1.943138] usb 1-4: Product: CEC Adapter
[    3.267137] input: Pulse-Eight CEC Adapter as /devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4:1.2/0003:2548:1002.0001/input/input14
[    3.267239] hid-generic 0003:2548:1002.0001: input,hidraw0: USB HID v1.10 Mouse [Pulse-Eight CEC Adapter] on usb-0000:00:14.0-4/input2
#

# cec-client
No device type given. Using 'recording device'
CEC Pa&ast;&ast;er created - libCEC version 4.0.2
no serial port given. trying autodetect:
 path:     /sys/devices/pci0000:00/0000:00:14.0/usb1/1-4
 com port: /sys/devices/pci0000:00/0000:00:14.0/usb1/1-4

opening a connection to the CEC adapter...
DEBUG:   [              11]     Broadcast (F): osd name set to 'Broadcast'
ERROR:   [            3514]     error opening serial port '/sys/devices/pci0000:00/0000:00:14.0/usb1/1-4': Is a directory
ERROR:   [            3514]     could not open a connection (try 1)
ERROR:   [            6349]     error opening serial port '/sys/devices/pci0000:00/0000:00:14.0/usb1/1-4': Is a directory
ERROR:   [            6349]     could not open a connection (try 2)
ERROR:   [            8239]     error opening serial port '/sys/devices/pci0000:00/0000:00:14.0/usb1/1-4': Is a directory
ERROR:   [            8239]     could not open a connection (try 3)
ERROR:   [            9499]     error opening serial port '/sys/devices/pci0000:00/0000:00:14.0/usb1/1-4': Is a directory
ERROR:   [            9499]     could not open a connection (try 4)
unable to open the device on port /sys/devices/pci0000:00/0000:00:14.0/usb1/1-4
NOTICE:  [           10504]     connection opened
ERROR:   [           10504]     could not start CEC communications
#

gnubit

Many thanks for this build, it installs on my ASUS VivoMini VC65-C1 (i5-8400T, Intel HD Graphics 630) whereas the previous beta did not.

It seems that recalbox-configgen is not configuring my F710 joypad in dreamcast/reicast (works fine so far in other emulators bundled in the build) I have tried re mapping the controller with no change.

my controllerP1.cfg

[compat]
btn_trigger_left = 0
axis_dpad1_y = 1
btn_trigger_right = 0
axis_dpad1_x = 0

[emulator]
mapping_name = Logitech Gamepad F710
btn_escape = 0

[dreamcast]
btn_b = 0
btn_a = 0
btn_x = 0
btn_start = 0
btn_y = 0
axis_y = 0
axis_x = 0

my emu.cfg

[audio]
backend = auto
disable = 0

[config]
Debug.SerialConsoleEnabled = 0
Dreamcast.Broadcast = 4
Dreamcast.Cable = 3
Dreamcast.RTC = -2113930091
Dreamcast.Region = 3
Dynarec.Enabled = 1
Dynarec.idleskip = 1
Dynarec.unstable-opt = 0
aica.LimitFPS = 1
aica.NoBatch = 0
aica.NoSound = 0
bios.UseReios = 0
pvr.MaxThreads = 3
pvr.Subdivide = 0
pvr.SynchronousRendering = 0
pvr.rend = 0
rend.UseMipmaps = 1
rend.WideScreen = 0
ta.skip = 0

[input]
enable_x11_keyboard = 1
evdev_device_id_1 = 5
evdev_device_id_2 = 6
evdev_device_id_3 = -1
evdev_device_id_4 = -1
evdev_mapping_1 = /recalbox/share/system/configs/reicast/controllerP1.cfg
evdev_mapping_2 = /recalbox/share/system/configs/reicast/controllerP2.cfg

[pvr]
nox11 = 0

[reios]
ElfFile = 

[testing]
ta.HashCheckFile = 
ta.HashLogFile = 

[validate]
OpenGlChecks = 0

[x11]
fullscreen = 0
height = 480
width = 640

gnubit

https://forum.recalbox.com/topic/14398/menu-and-kodi-is-not-full-screen-on-old-netbook/4

Here may be of help

gnubit

Cheers thanks

gnubit

I have complied a x86_64 dev build from master, using docker and the generic config which built and installed fine.

I`m wondering when the next stable is released can I upgrade to it, or do I need to reinstall the stable image when released ?

Reason being is that I have tried the Christmas beta , but the target box has no ethernet access whereas the dev build (built 9th Jan) has working ethernet. So I cant investigate/report issues with the Christmas build.

Thanks.

gnubit

@felipeadms said in How to convert changes made in recalbox to .IMG?:

@paradadf I understand, but even then I would like to know how to compile the changes made to a ".img" file image. Do you know how to do that?

@felipeadms

You could shrink your created image if your handy with linux by mounting the image as loopback, resizing it, then truncating it.

https://softwarebakery.com/shrinking-images-on-linux

gnubit

@strodown Many thanks for the image. Would you mind explaining how you compiled the image ? Did you add the nvidia buildroot to the build then build it via the recallbox docker ? If so l would like to compile an image for the nvidia legacy blob to test it on a old pc I have. Cheers.

gnubit

Apologies, xrandr options should be -- (double hyphen, not single dash)

gnubit

@scottaii

Possibly, but I`m not sure. You could try editing .xinitrc with:

xrandr —output LVDS1 —off --output HDMI-1 --auto

(The --auto option will turn the specified output on if it is off and set the preferred (maximum) resolution, assuming HDMI-1 is your external hdmi reported by xrandr, it may be HDMI-0 or another value.)

In the unlikely event it does not auto detect the external display resolution you could set it by:

xrandr —output LVDS1 —off --output HDMI-1 --mode 1920x1080

Or force 720p:

xrandr —output LVDS1 —off --output HDMI-1 --mode 1366x768

https://wiki.archlinux.org/index.php/Xrandr is a good resource to find out more about xrandr. Hope it helps

gnubit

Hello Scott, are you using the default emulator and core for n64 ? (should be if you have not changed it) I personally have no issues with the stock autoconfiguated setup. Is your laptop display resolution the same as your hdmi TV screen (ie 1080p) ?

default emulator/core:
n64.core=glide64mk2
n64.emulator=mupen64plus

You can check this in the via the main menu > advanced > advanced emulator configuration
or in /recalbox/share/system/recalbox.conf if accessing the the file system via ssh/scp

My [ Video-General] section of mupen64plus.cfg from /recalbox/share/system/configs/mupen64/mupen64plus.cfg looks like this:

[Video-General]

Fullscreen = False
# Width of output window or fullscreen width
ScreenWidth = 1920
# Height of output window or fullscreen height
ScreenHeight = 1080
# If true, use correct aspect ratio, if false, stretch to fullscreen
AspectRatio = True
# If true, activate the SDL_GL_SWAP_CONTROL attribute
VerticalSync = False
# Rotate screen contents: 0=0 degree, 1=90 degree, 2 = 180 degree, 3=270 degree
Rotate = 0

gnubit

@usman_tahir880

did you stop ES from root terminal from your laptop ?

/etc/init.d/S31emulationstation stop

then xrandr to list your displays

Posts made by gnubit