N64 controller and recalbox.

[Substring]

@eagleeye1011 said in N64 controller and recalbox.:

I've tried the "nano ~/recalbox.conf" command and it did nothing

How and where did you try it ? Have you followed https://github.com/recalbox/recalbox-os/wiki/Root-access-on-terminal-(EN) ?

Have you tried the URL I gave you ?

The n64.configfile=dummy prevents recalbox from auto-configuring N64 depending on your pad setup. It's mandatory if you want to customize your inputs as they don't follow the main configuration rule.

[fiveminutebreak]

@substring Tried every method to access InputAutoCfg, and cannot find a way to access it with write permission. Every time it opens as read-only. Is there something I'm missing or something that changed?

[acris]

Hello
https://github.com/recalbox/recalbox-os/wiki/Make-a-partition-writable-(EN)

[Substring]

@fiveminutebreak That file is in /recalbox/share/system/configs/mupen64 which is writeable

[dh04000]

@Substring

Hey, I recently purchased one of these controllers myself, and I can't seem to get it to work. I followed the (https://github.com/recalbox/recalbox-os/wiki/Configure-N64-controllers-(EN)) but jstest won't work. I added this (n64.configfile=dummy) to the end of my recalbox.conf file. I tried to manually edit the InputAutoCfg.ini file (nano /recalbox/share/system/configs/mupen64/InputAutoCfg.ini) and added the following to the end of the file:

[Generic USB Joystick]
plugged = True
plugin = 2
mouse = False
AnalogDeadzone = 4096,4096
AnalogPeak = 32768,32768
DPad R = hat(0 Right)
DPad L = hat(0 Left)
DPad D = hat(0 Down)
DPad U = hat(0 Up)
Start = button(9)
Z Trig = button(7)
B Button = button(8)
A Button = button(6)
C Button R = button(1)
C Button L = button(3)
C Button D = button(2)
C Button U = button(0)
R Trig = button(5)
L Trig = button(4)
Mempak switch =
Rumblepak switch =
X Axis = axis(0-,0+)
Y Axis = axis(3-,3+)

But, I don't think it sees the changes I made when I start up the emulator. Just what changes I made in the controller config GUI in the controller menu.

[dh04000]

@Substring

Never mind. I found the problem, I had an extra bracket far right to the controller name.

To help other's with this controller. here's my controller config:

[Generic USB Joystick]
plugged = True
plugin = 2
mouse = False
AnalogDeadzone = 4096,4096
AnalogPeak = 32768,32768
DPad R = hat(0 Right)
DPad L = hat(0 Left)
DPad D = hat(0 Down)
DPad U = hat(0 Up)
Start = button(9)
Z Trig = button(7)
B Button = button(8)
A Button = button(6)
C Button R = button(1)
C Button L = button(3)
C Button D = button(2)
C Button U = button(0)
R Trig = button(5)
L Trig =
Mempak switch =
Rumblepak switch =
X Axis = axis(0-,0+)
Y Axis = axis(3-,3+)

I unmapped the left trigger to use for the mupen64plus.cfg, where I mapped J0B4/B9 as exit emulation, J0B4/B6 as save state, and J0B4/B8 as Load state. These options are changed in the [Core Options].

What is the command for Hat0 left or right though..... do you know Substring?

[Substring]

@dh04000 said in N64 controller and recalbox.:

What is the command for Hat0 left or right though

i don't understand

[dh04000]

@substring said in N64 controller and recalbox.:

@dh04000 said in N64 controller and recalbox.:

What is the command for Hat0 left or right though

i don't understand

I should have written more clearly. What I was asking is what the symbol for directon pads looks like in the mupen64plus.cfg file. Player 1 Button 9 is J0B9. What is Player 1 direction pad right? J0(something)?

[Substring]

@dh04000 should check in the mupen doc, but i think they can't be mapped

[Chris Matthes]

@dh04000 said in N64 controller and recalbox.:

@Substring

Never mind. I found the problem, I had an extra bracket far right to the controller name.

To help other's with this controller. here's my controller config:

[Generic USB Joystick]
plugged = True
plugin = 2
mouse = False
AnalogDeadzone = 4096,4096
AnalogPeak = 32768,32768
DPad R = hat(0 Right)
DPad L = hat(0 Left)
DPad D = hat(0 Down)
DPad U = hat(0 Up)
Start = button(9)
Z Trig = button(7)
B Button = button(8)
A Button = button(6)
C Button R = button(1)
C Button L = button(3)
C Button D = button(2)
C Button U = button(0)
R Trig = button(5)
L Trig =
Mempak switch =
Rumblepak switch =
X Axis = axis(0-,0+)
Y Axis = axis(3-,3+)

I unmapped the left trigger to use for the mupen64plus.cfg, where I mapped J0B4/B9 as exit emulation, J0B4/B6 as save state, and J0B4/B8 as Load state. These options are changed in the [Core Options].

What is the command for Hat0 left or right though..... do you know Substring?

thank u so much! works with my 1€ N64 USB Controller on ebay

[dh04000]

@chris-matthes said in N64 controller and recalbox.:

@dh04000 said in N64 controller and recalbox.:

@Substring

Never mind. I found the problem, I had an extra bracket far right to the controller name.

To help other's with this controller. here's my controller config:

[Generic USB Joystick]
plugged = True
plugin = 2
mouse = False
AnalogDeadzone = 4096,4096
AnalogPeak = 32768,32768
DPad R = hat(0 Right)
DPad L = hat(0 Left)
DPad D = hat(0 Down)
DPad U = hat(0 Up)
Start = button(9)
Z Trig = button(7)
B Button = button(8)
A Button = button(6)
C Button R = button(1)
C Button L = button(3)
C Button D = button(2)
C Button U = button(0)
R Trig = button(5)
L Trig =
Mempak switch =
Rumblepak switch =
X Axis = axis(0-,0+)
Y Axis = axis(3-,3+)

I unmapped the left trigger to use for the mupen64plus.cfg, where I mapped J0B4/B9 as exit emulation, J0B4/B6 as save state, and J0B4/B8 as Load state. These options are changed in the [Core Options].

What is the command for Hat0 left or right though..... do you know Substring?

thank u so much! works with my 1€ N64 USB Controller on ebay

I'm glad that I was able to help you with my documentation.