Retour 7.2.2 sur XU4
-
@cedric-debuiselle il semblerait selon certain retour que en eMMC cela ne fonctionne pas .... mais de mon coté en micro SD cela ne fonctionne pas non plus
-
Merci pour les lignes je vais tester ça demain
je vais essayé sur une micro SD pour voir si y a du changement
-
Salut,
En effet, les vidéos saccadent. J'ai isolé d'où cela vient. Ça sera corrigé dans la prochaine version.
Petit aparté, le xu4 n'est pas une plateforme laissée à l'abandon. Bien au contraire, nous essayons de la faire progresser au fil des releases de Recalbox. La complexité à maintenir en vie la plateforme vient du fait que le constructeur ne fait pas évoluer les softs qui sont utiles pour la plateforme (le noyau Linux pour ne citer que lui) et il faut attendre des initiatives de la communauté pour voir des avancées. Malheureusement, elles ne sont pas toutes parfaites et il faut parfois adapter des bouts de code.
David
-
@loli72 said in Retour 7.2.2 sur XU4:
@manitou Au cas où je te laisse le contenu complet de mon recalbox.conf et du config.ini en 7.2.2. Après je vois plus quoi faire.
recalbox.conf
# System Variable # You can configure your recalbox from here # To set a variable, remove the first ; on the line # NOTE ON CEC FOR REMOTES # you've to plug the ODROID XU4 on the HDMI1 of your tv # this is a limitation of the EXYNOS libcec adapter # ------------ A - System Options ----------- # # Uncomment the system.power.switch you use ;system.power.switch=ATX_RASPI_R2_6 # http://lowpowerlab.com/atxraspi/#installation ;system.power.switch=MAUSBERRY # http://mausberry-circuits.myshopify.com/pages/setup ;system.power.switch=REMOTEPIBOARD_2003 # http://www.msldigital.com/pages/support-for-remotepi-board-2013 ;system.power.switch=REMOTEPIBOARD_2005 # http://www.msldigital.com/pages/support-for-remotepi-board-plus-2015 ;system.power.switch=WITTYPI # http://www.uugear.com/witty-pi-realtime-clock-power-management-for-raspberry-pi ;system.power.switch=PIN56ONOFF # https://github.com/recalbox/recalbox-os/wiki/Add-a-start-stop-button-to-your-recalbox-(EN) ;system.power.switch=PIN56PUSH # https://github.com/recalbox/recalbox-os/wiki/Add-a-start-stop-button-to-your-recalbox-(EN) ;system.power.switch=PIN356ONOFFRESET # https://github.com/recalbox/recalbox-os/wiki/Add-a-start-stop-button-to-your-recalbox-(EN) ## Splash screen duration ## 0 : Video will be stopped when emulationstation is ready to start. ## -1 : All the video will be played before emulationstation start (default) ## >0 : Time the video will be played before emulationstation start (in seconds) system.splash.length=-1 ## Splash videos selection ## all: select a boot video in recalbox videos and user videos ## recalbox: select a boot video only in recalbox videos ## custom: select a boot video only in user videos ## Any invalid value means "all" system.splash.select=all ## Recalbox Manager (http manager) system.manager.enabled=1 ## Currently, only version 2 is available system.manager.version=2 ## Recalbox security # enforce security # samba password required # disable virtual gamepads system.security.enabled=0 ## Recalbox API (REST) system.api.enabled=0 ## EmulationStation ### menu style ### default -> default all options menu ### none -> no menu except the game search menu ### bartop -> less menu, only needed for bartops emulationstation.menu=default ### Select a system to show on boot (use rom directory name) (string) emulationstation.selectedsystem=favorites ### Show the gamelist of the first or selected system on boot (0,1) emulationstation.bootongamelist=0 ### Disable system view. ES will boot and show ONLY the first or selected system (0,1) emulationstation.hidesystemview=0 ### Pa**e Gamelists only. Show only games listed in gamelist.xml files (0,1) emulationstation.gamelistonly=0 ### Force basicgameList view to be displayed, even if your game systems are scraped (0,1) emulationstation.forcebasicgamelistview=0 ### Filter out adult games ### you may use emulationstation.snes.filteradultgames=1 ### to filter out adult games for the snes system or any other system ;emulationstation.filteradultgames=1 ### Zipped gamelist preference ### Whatever you choose, emulationstation can read both compressed ### and uncompressed gamelist.xml or gamelist.zip ### However updated gamelist will be saved in your prefered format. ### Zipped format may save load time, especially on slow devices. ### 0 = gamelist.xml ### 1 = gamelist.zip ;emulationstation.zippedgamelist=1 ## Arcade metasystem ## Activate the Arcade metasystem to group all games from piFBA, FBN (libretro), MAME and optionally Neogeo ## into a single "Arcade" system. ;emulationstation.arcade=1 ## You may want to specify its position in the system list. (Default: 0) ## Negatives values may be used to tart from the end (-1 = last position) ;emulationstation.arcade.position=0 ## Include NeoGeo or not (default: 1) ;emulationstation.arcade.includeneogeo=1 ## Hide included system or leave them in the system list (default: 1) ;emulationstation.arcade.hideoriginals=1 ## Virtual systems ### Activate a virtual system with all games available from all systems ;emulationstation.collection.allgames=1 ### Activate a virtual system with all multiplayer games (players >= 2) ;emulationstation.collection.multiplayers=1 ### Activate a virtual system with last played games ;emulationstation.collection.lastplayed=1 ## Videosnaps ### Delay before videosnaps start, in millisecond. Default: 2s ;emulationstation.videosnaps.delay=2000 ### Video loop times. 0 = no video. 1 or more = the video loops x times before fading out ;emulationstation.videosnaps.loop=1 ### Enable videosnap sound/music ;emulationstation.videosnaps.sound=1 ## Scrapers ### Activate this option to extract region from filename when possible ;scraper.extractregionfromfilename=1 ### Select the source of game's names ### 0 = from scrapper result (default) ### 1 = from filename ### 2 = from filename undecorated (i.e: (text) and [text] removed) ;scraper.getnamefrom=0 ### ScreenScraper.fr ### Force media region - if not defined, region is taken from system.language. Default: us ;scraper.screenscraper.region=eu ### Force text language - if not defined, region is taken from system.language. Default: en ;scraper.screenscraper.language=fr ### Choose the media to download among: ### screenshot: game screenshot ### title : game title screenshot ### box2d : Front case ### box3d : 3D rendered case ### mixv1 : Recalbox special mix image V1 (default) ### mixv2 : Recalbox special mix image V2 ;scraper.screenscraper.media=mixv1 ### ScreenScraper account ;scraper.screenscraper.user= ;scraper.screenscraper.password= ## Emulator special keys ## default -> default all special keys ## nomenu -> cannot popup the emulator menu ## none -> no special keys in emulators system.emulators.specialkeys=default ## Show or hide kodi in emulationstation (0,1) kodi.enabled=0 ## Start kodi at launch (0,1) kodi.atstartup=0 ## set x button shortcut (0,1) kodi.xbutton=0 ## Kodi can wait for a network component before starting ## waithost is the ip or hostname that must answer to a ping to validate the availability ## waittime is the maximum time waited when kodi boots ## if waitmode is required, kodi will not start if the component is not available ## if waitmode is wish, kodi will start if the component is not available ## if waitmode is not set or has another value, kodi will start immediately ;kodi.network.waitmode=required ;kodi.network.waittime=10 ;kodi.network.waithost=192.168.0.50 # ------------ B - Network ------------ # ## Set system hostname system.hostname=RECALBOX ## Activate wifi (0,1) wifi.enabled=0 ## Set wifi region ## More info here: https://github.com/recalbox/recalbox-os/wiki/Wifi-country-code-(EN) wifi.region=JP ## Wifi SSID (string) ;wifi.ssid=new ssid ## Wifi KEY (string) ## after rebooting the recalbox, the "new key" is replace by a hidden value "enc:xxxxx" ## you can edit the "enc:xxxxx" value to replace by a clear value, it will be updated again at the following reboot ## Escape your special chars (# ; $) with a backslash : $ => \$ ;wifi.key=new key ## Wifi - static IP ## if you want a static IP address, you must set all 3 values (ip, gateway, and netmask) ## if any value is missing or all lines are commented out, it will fall back to the ## default of DHCP ;wifi.ip=manual ip address ;wifi.gateway=new gateway ;wifi.netmask=new netmask # secondary wifi (not configurable via the user interface) ;wifi2.ssid=new ssid ;wifi2.key=new key # third wifi (not configurable via the user interface) ;wifi3.ssid=new ssid ;wifi3.key=new key ## Samba share system.samba.enabled=1 ### Virtual Gamepads system.virtual-gamepads.enabled=1 ### SSH system.ssh.enabled=1 # ------------ C - Audio ------------ # ## Set the audio device (auto, hdmi, jack) audio.device=alsa_card.0:hdmi-output-0 ## Set system volume (0..100) audio.volume=90 ## Enable or disable system sounds in ES (0,1) audio.bgmusic=1 # -------------- D - Controllers ----------------- # # Enable support for standard bluetooth controllers controllers.bluetooth.enabled=1 # Enable ERTM controllers.bluetooth.ertm=1 ## Please enable only one of these # -------------- D1 - PS3 Controllers ------------ # ##Enable PS3 controllers support controllers.ps3.enabled=1 ## Choose a driver between bluez, official and shanwan ## bluez -> bluez 5 + kernel drivers, support official and shanwan sisaxis ## official -> sixad drivers, support official and gasia sisaxis ## shanwan -> shanwan drivers, support official and shanwan sisaxis controllers.ps3.driver=bluez # ------------ D2 - GPIO Controllers ------------ # ## GPIO Controllers ## enable controllers on GPIO with mk_arcarde_joystick_rpi (0,1) controllers.gpio.enabled=0 ## mk_gpio arguments, map=1 for one controller, map=1,2 for 2 (map=1,map=1,2) controllers.gpio.args=map=1,2 ## DB9 Controllers ## Enable DB9 drivers for atari, megadrive, amiga controllers (0,1) controllers.db9.enabled=0 ## db9 arguments controllers.db9.args=map=1 ## Gamecon controllers ## Enable gamecon controllers, for nes, snes, psx (0,1) controllers.gamecon.enabled=0 ## gamecon_args controllers.gamecon.args=map=1 ## XGaming's XArcade Tankstik and other compatible devices controllers.xarcade.enabled=1 # ------------ D3 - Joycon Controllers ------------ # controllers.joycond.enabled=1 # ------------ E - Language and keyboard ------------ # ## Set the language of the system (fr_FR,en_US,en_GB,de_DE,pt_BR,es_ES,it_IT,eu_ES,tr_TR,zh_CN) system.language=fr_FR ## set the keyboard layout (fr,en,de,us,es) system.kblayout=fr ## Set you local time ## Select your timezone from : ls /usr/share/zoneinfo/ (string) ;system.timezone=Europe/Paris # ------------ F - UPDATES ------------ # ## Automatically check for updates at start (0,1) updates.enabled=1 # Update type : default to stable updates.type=stable # ------------ G - HERE IT IS - GLOBAL EMULATOR CONFIGURATION ------------ # ## The global value will be used for all emulators, except if the value ## is redefined in the emulator ## Set game resolution for emulators ## Please don't modify this setting ## This arch does not support the video mode switch ## (string) global.videomode=default ## Shader set ## Automatically select shaders for all systems ## (none, retro, scanlines) global.shaderset=none ## Once enabled, your screen will be cropped, and you will have a pixel perfect image (0,1) global.integerscale=0 ## Set gpslp shader for all emulators (prefer shadersets above). Absolute path (string) global.shaders= ## Set ratio for all emulators (auto,4/3,16/9,16/10,custom) global.ratio=auto ## Set smooth for all emulators (0,1) global.smooth=1 ## Set rewind for all emulators (0,1) global.rewind=1 ## Set autosave/load savestate for all emulators (0,1) global.autosave=0 ## Enable retroarchievements (0,1) ## Set your www.retroachievements.org username/password ## Escape your special chars (# ; $) with a backslash : $ => \$ global.retroachievements=0 global.retroachievements.hardcore=0 global.retroachievements.username= global.retroachievements.password= ## Set retroarch input driver (auto, udev, sdl2) ## If you don't have issues with your controllers, let auto global.inputdriver=auto ## If you do not want recalboxOS to generate the configuration for all emulators (string) ;global.configfile=/path/to/my/configfile.cfg ## Demo screensaver parameters ## Set the system list from which ES will run random games ## Empty list or unexisting key means all available systems global.demo.systemlist=3do,amigacd32,atari2600,atari5200,atari7800,daphne,fbneo,fds,gamegear,gba,lynx,mame,mastersystem,megadrive,neogeo,nes,ngpc,pcengine,sega32x,sg1000,snes ## Default demo game sessions last 90s. Change this value if you want shorter or longer sessions ;global.demo.duration=90 ## Default game info screen duration lasts 6s. Change this value if you want shorter or longer info screens. ;global.demo.infoscreenduration=6 ## Retroarch AI Translation service ## Comment out or set to 0 the following key if you don't want the AI service global.translate=1 ## Set the source and the target languages. ## Allowed language list: EN, ES, FR, IT, DE, JP, NL, CS, DA, SV, HR, KO, ZH_CN, ZH_TW, CA, BG, BN, EU, AZ, AR, SQ, ## AF, EO, ET, TL, FI, GL, KA, EL, GU, HT, IW, HI, HU, IS, ID, GA, KN, LA, LV, LT, MK, MS, ## MT, NO, FA, PL, PT, RO, RU, SR, SK, SL, SW, TA, TE, TH, TR, UK, UR, VI, CY, YI ## Setting the translate.from key to a specified language may speed up or give more accurate results ## If translate.to key is commented, the default value is extracted from system.language or, if system.language is ## undefined, set to auto (=EN). global.translate.from=auto global.translate.to=auto ## zTranslate API Key ## go to https://ztranslate.net and create an account. ## validate your account, then log in and go to the settngs page ## Look for the API Key at the bottom of the page, then uncomment the following key and paste your API Key: ;global.translate.apikey=RECALBOX ## Other translation service ## If you want to use another translation service or a custom API call, use this key to ## specify the url to call. If the key is not empty, it is used instead of zTranslation's API Key ;global.translate.url= # ------------ H - EMULATORS CHOICES ----------- # ## You can override the global configurations here ## Here is the snes example ;snes.core=snes9x2010 ;snes.shaders=/recalbox/share/shaders/shaders_glsl/mysnesshader.gplsp ;snes.ratio=16/9 ;snes.smooth=0 ;snes.rewind=1 ;snes.autosave=0 ;snes.emulator=libretro ;snes.integerscale=0 ## If you do not want recalboxOS to generate the configuration for the emulator: ;snes.configfile=/path/to/my/configfile.cfg ## Default cores for Odroid XU4 ;snes.core=snes9x n64.core=gliden64 ## NeoGeo emulator ## You can use pifba or a libretro core (fba2x,libretro) neogeo.emulator=libretro ## If you set libretro as neogeo.emulator, the line below sets the retroarch core (fbneo, mame2000) neogeo.core=fbneo ## Demo screensaver parameters ## Include or exclude a particular system from the demo screensaver ## You may change the global.demo.systemlist key or include/exclude every single system ;snes.demo.include=0 ## Set the session duration for a particular system ;snes.demo.duration=90 # ------------ J - TFT SECONDARY SCREEN ----------- # #Second miniTFT screen as marquee to display scrapes and videos #Enable it with system.secondMiniTFT.enabled=1, disable with system.secondMiniTFT.enabled=0 #this configuration is REQUIRED system.secondminitft.enabled=1 #Type of mini TFT : OGST, unknown #Most of spi tft screen are enabled thanks to overlays in /boot/config.txt in rpi and /boot/config.ini on odroidxu4 #please check the specific configuration of your screen #Some examples are available on the page ..... # values are : # - overlay : screen configured through overlays in /boot/config.txt or /boot/config.ini (odroidxu4/ogst) # - default : the rest of the world #this configuration is REQUIRED if system.secondminitft.enabled=1 system.secondminitft.type=overlay #Choose the resolution of your screen #miniTFT resolution 320x240 -> 240p, 480x320 -> 320p #this configuration is REQUIRED if system.secondminitft.enabled=1 system.secondminitft.resolution=240p #Scraped image aspect on tft screen : fbv display option # options available : stretch, ignore-aspect, enlarge. # stretch : Strech (using a simple resizing routine) the image to fit onto screen if necessary # alpha : use the alpha channel (if applicable) # ignore-aspect : Ignore the image aspect while resizing # enlarge : Enlarge the image to fit the whole screen if necessary # 1 = enabled, 0 = disabled #this configuration is REQUIRED if system.secondminitft.enabled=1 system.secondminitft.imagestretchenabled=1 system.secondminitft.imageenlargeenabled=0 system.secondminitft.imagealphaenabled=1 system.secondminitft.imageignoreaspectenabled=1 #When activating the second TFT screen, you may want to display #game scraped video only on the second screen. This variable #allows you to disable scraped video playing in ES during game browsing #system.secondminitft.disablevideoines=1 disable video playing in ES #system.secondminitft.disablevideoines=0 enable video playing in ES #this configuration is OPTIONAL if system.secondminitft.enabled=1 system.secondminitft.disablevideoines=1 #if the backlight of your your screen can be manage by PWM, #indicates the GPIO value of your PWM control #WiringPi and its gpio program will be used to control the backlight #when RB goes in SLEEP mode, and when it wakes up. #On raspberry pi, PWMs cannot be used simultaneously with Jack sound output. #If your are using HDMI or a Audio hat you can use backlight PWM control for the second screen #If you are using Jack output please leave commented. #The Screen will be switch down in Sleep mode, and switch on when it wakes up. #On OGST, only this mode is available. #this configuration is OPTIONAL if system.secondminitft.enabled=1 ;system.secondminitft.backlightcontrol=18 # system.secondminitft.usemarquee variabla allows you to display a different # image during running game. just creat a directory named "marquees" in media # aside videos and images and put new images with the same name as in images # example : # - /recalbox/share/roms/neogeo/media/marquees/alpham2.png # - /recalbox/share/roms/neogeo/media/images/alpham2.png # if set to 1, in game the marquee images will be displayed # if set to 0, in game the scraped images will be displayed ;system.secondminitft.usemarquee=0 #system.secondminitft.sleepenabled allows you to enable/disable #sleep mode for the second TFT. If set to 1 sleep mode is enabled and #backlight of the screen will be OFF. If set to 0, sleep mode is #disabled and the backlight of the screen will be always On ;system.secondminitft.sleepenabled=0 # ------------ I - NETPLAY PARAMETERS ----------- # ## All these values are handled by Recalbox itself global.netplay=1 global.netplay.nickname= global.netplay.port=55435 global.netplay.relay= global.netplay.systems=fbneo,mame,mastersystem,megadrive,neogeo,nes,pcengine,sega32x,sg1000,snes,supergrafx,atari2600,pcenginecd,pcfx,fds,tic80,segacd,mrboom,colecovision global.netplay.lobby=http://lobby.libretro.com/list/ ## Configurations generated by Recalbox emulationstation.theme.recalbox-next.colorset=1-light blue colors emulationstation.theme.recalbox-next.gameclipview=0 - DEFAULT emulationstation.theme.recalbox-next.gamelistview=1-standard gamelist emulationstation.theme.recalbox-next.region=us emulationstation.theme.recalbox-next.iconset=1-standard icons emulationstation.theme.recalbox-next.menuset=1-light blue icons emulationstation.theme.recalbox-next.systemview=1-vertical left system.firsttimeuse=0 emulationstation.pad1=030000005e0400008e02000020010000:Xbox 360 Controller emulationstation.pad0=030000005e0400008e02000014010000:Xbox 360 Controllerconfig.ini
[generic] ; Device Tree Overlay overlay_resize=16384 ; uncomment next line to enable Odroid XU4 OGST overlay_profile=hktft_cs_ogst overlays="spi0 i2c0 i2c1 uart0" [overlay_hktft_cs_ogst] overlays="hktft-cs-ogst i2c0"j'ai fait une réinstallé de nouveau le fichier recalbox.conf par défaut la ligne 388 est sur 0 avec ; devant , pour la ligne 398 idem ; , pareil ligne 404 , ligne 416 à la ligne 419 ; devant toute et sur la 418 j'ai 0 à la place de 1 ,ligne 428 ; au début .
sur le config.ini la ligne 5 j'ai ; au début
J'ai mis à l'identique aucun changement -
voila mon fichier recalbox.conf
# System Variable # You can configure your recalbox from here # To set a variable, remove the first ; on the line # NOTE ON CEC FOR REMOTES # you've to plug the ODROID XU4 on the HDMI1 of your tv # this is a limitation of the EXYNOS libcec adapter # ------------ A - System Options ----------- # # Uncomment the system.power.switch you use ;system.power.switch=ATX_RASPI_R2_6 # http://lowpowerlab.com/atxraspi/#installation ;system.power.switch=MAUSBERRY # http://mausberry-circuits.myshopify.com/pages/setup ;system.power.switch=REMOTEPIBOARD_2003 # http://www.msldigital.com/pages/support-for-remotepi-board-2013 ;system.power.switch=REMOTEPIBOARD_2005 # http://www.msldigital.com/pages/support-for-remotepi-board-plus-2015 ;system.power.switch=WITTYPI # http://www.uugear.com/witty-pi-realtime-clock-power-management-for-raspberry-pi ;system.power.switch=PIN56ONOFF # https://github.com/recalbox/recalbox-os/wiki/Add-a-start-stop-button-to-your-recalbox-(EN) ;system.power.switch=PIN56PUSH # https://github.com/recalbox/recalbox-os/wiki/Add-a-start-stop-button-to-your-recalbox-(EN) ;system.power.switch=PIN356ONOFFRESET # https://github.com/recalbox/recalbox-os/wiki/Add-a-start-stop-button-to-your-recalbox-(EN) ## Splash screen duration ## 0 : Video will be stopped when emulationstation is ready to start. ## -1 : All the video will be played before emulationstation start (default) ## >0 : Time the video will be played before emulationstation start (in seconds) system.splash.length=-1 ## Splash videos selection ## all: select a boot video in recalbox videos and user videos ## recalbox: select a boot video only in recalbox videos ## custom: select a boot video only in user videos ## Any invalid value means "all" system.splash.select=all ## Recalbox Manager (http manager) system.manager.enabled=1 ## Currently, only version 2 is available system.manager.version=2 ## Recalbox security # enforce security # samba password required # disable virtual gamepads system.security.enabled=0 ## Recalbox API (REST) system.api.enabled=0 ## EmulationStation ### menu style ### default -> default all options menu ### none -> no menu except the game search menu ### bartop -> less menu, only needed for bartops emulationstation.menu=default ### Select a system to show on boot (use rom directory name) (string) emulationstation.selectedsystem=favorites ### Show the gamelist of the first or selected system on boot (0,1) emulationstation.bootongamelist=0 ### Disable system view. ES will boot and show ONLY the first or selected system (0,1) emulationstation.hidesystemview=0 ### Pa**e Gamelists only. Show only games listed in gamelist.xml files (0,1) emulationstation.gamelistonly=0 ### Force basicgameList view to be displayed, even if your game systems are scraped (0,1) emulationstation.forcebasicgamelistview=0 ### Filter out adult games ### you may use emulationstation.snes.filteradultgames=1 ### to filter out adult games for the snes system or any other system emulationstation.filteradultgames=0 ### Zipped gamelist preference ### Whatever you choose, emulationstation can read both compressed ### and uncompressed gamelist.xml or gamelist.zip ### However updated gamelist will be saved in your prefered format. ### Zipped format may save load time, especially on slow devices. ### 0 = gamelist.xml ### 1 = gamelist.zip ;emulationstation.zippedgamelist=1 ## Arcade metasystem ## Activate the Arcade metasystem to group all games from piFBA, FBN (libretro), MAME and optionally Neogeo ## into a single "Arcade" system. ;emulationstation.arcade=1 ## You may want to specify its position in the system list. (Default: 0) ## Negatives values may be used to tart from the end (-1 = last position) ;emulationstation.arcade.position=0 ## Include NeoGeo or not (default: 1) ;emulationstation.arcade.includeneogeo=1 ## Hide included system or leave them in the system list (default: 1) ;emulationstation.arcade.hideoriginals=1 ## Virtual systems ### Activate a virtual system with all games available from all systems ;emulationstation.collection.allgames=1 ### Activate a virtual system with all multiplayer games (players >= 2) ;emulationstation.collection.multiplayers=1 ### Activate a virtual system with last played games ;emulationstation.collection.lastplayed=1 ## Videosnaps ### Delay before videosnaps start, in millisecond. Default: 2s ;emulationstation.videosnaps.delay=2000 ### Video loop times. 0 = no video. 1 or more = the video loops x times before fading out ;emulationstation.videosnaps.loop=1 ### Enable videosnap sound/music ;emulationstation.videosnaps.sound=1 ## Scrapers ### Activate this option to extract region from filename when possible ;scraper.extractregionfromfilename=1 ### Select the source of game's names ### 0 = from scrapper result (default) ### 1 = from filename ### 2 = from filename undecorated (i.e: (text) and [text] removed) ;scraper.getnamefrom=0 ### ScreenScraper.fr ### Force media region - if not defined, region is taken from system.language. Default: us ;scraper.screenscraper.region=eu ### Force text language - if not defined, region is taken from system.language. Default: en ;scraper.screenscraper.language=fr ### Choose the media to download among: ### screenshot: game screenshot ### title : game title screenshot ### box2d : Front case ### box3d : 3D rendered case ### mixv1 : Recalbox special mix image V1 (default) ### mixv2 : Recalbox special mix image V2 ;scraper.screenscraper.media=mixv1 ### ScreenScraper account ;scraper.screenscraper.user= ;scraper.screenscraper.password= ## Emulator special keys ## default -> default all special keys ## nomenu -> cannot popup the emulator menu ## none -> no special keys in emulators system.emulators.specialkeys=default ## Show or hide kodi in emulationstation (0,1) kodi.enabled=0 ## Start kodi at launch (0,1) kodi.atstartup=0 ## set x button shortcut (0,1) kodi.xbutton=0 ## Kodi can wait for a network component before starting ## waithost is the ip or hostname that must answer to a ping to validate the availability ## waittime is the maximum time waited when kodi boots ## if waitmode is required, kodi will not start if the component is not available ## if waitmode is wish, kodi will start if the component is not available ## if waitmode is not set or has another value, kodi will start immediately ;kodi.network.waitmode=required ;kodi.network.waittime=10 ;kodi.network.waithost=192.168.0.50 # ------------ B - Network ------------ # ## Set system hostname system.hostname=RECALBOX ## Activate wifi (0,1) wifi.enabled=0 ## Set wifi region ## More info here: https://github.com/recalbox/recalbox-os/wiki/Wifi-country-code-(EN) wifi.region=JP ## Wifi SSID (string) ;wifi.ssid=new ssid ## Wifi KEY (string) ## after rebooting the recalbox, the "new key" is replace by a hidden value "enc:xxxxx" ## you can edit the "enc:xxxxx" value to replace by a clear value, it will be updated again at the following reboot ## Escape your special chars (# ; $) with a backslash : $ => \$ ;wifi.key=new key ## Wifi - static IP ## if you want a static IP address, you must set all 3 values (ip, gateway, and netmask) ## if any value is missing or all lines are commented out, it will fall back to the ## default of DHCP ;wifi.ip=manual ip address ;wifi.gateway=new gateway ;wifi.netmask=new netmask # secondary wifi (not configurable via the user interface) ;wifi2.ssid=new ssid ;wifi2.key=new key # third wifi (not configurable via the user interface) ;wifi3.ssid=new ssid ;wifi3.key=new key ## Samba share system.samba.enabled=1 ### Virtual Gamepads system.virtual-gamepads.enabled=1 ### SSH system.ssh.enabled=1 # ------------ C - Audio ------------ # ## Set the audio device (auto, hdmi, jack) audio.device=alsa_card.0:hdmi-output-0 ## Set system volume (0..100) audio.volume=90 ## Enable or disable system sounds in ES (0,1) audio.bgmusic=1 # -------------- D - Controllers ----------------- # # Enable support for standard bluetooth controllers controllers.bluetooth.enabled=1 # Enable ERTM controllers.bluetooth.ertm=1 ## Please enable only one of these # -------------- D1 - PS3 Controllers ------------ # ##Enable PS3 controllers support controllers.ps3.enabled=1 ## Choose a driver between bluez, official and shanwan ## bluez -> bluez 5 + kernel drivers, support official and shanwan sisaxis ## official -> sixad drivers, support official and gasia sisaxis ## shanwan -> shanwan drivers, support official and shanwan sisaxis controllers.ps3.driver=bluez # ------------ D2 - GPIO Controllers ------------ # ## GPIO Controllers ## enable controllers on GPIO with mk_arcarde_joystick_rpi (0,1) controllers.gpio.enabled=0 ## mk_gpio arguments, map=1 for one controller, map=1,2 for 2 (map=1,map=1,2) controllers.gpio.args=map=1,2 ## DB9 Controllers ## Enable DB9 drivers for atari, megadrive, amiga controllers (0,1) controllers.db9.enabled=0 ## db9 arguments controllers.db9.args=map=1 ## Gamecon controllers ## Enable gamecon controllers, for nes, snes, psx (0,1) controllers.gamecon.enabled=0 ## gamecon_args controllers.gamecon.args=map=1 ## XGaming's XArcade Tankstik and other compatible devices controllers.xarcade.enabled=1 # ------------ D3 - Joycon Controllers ------------ # controllers.joycond.enabled=1 # ------------ E - Language and keyboard ------------ # ## Set the language of the system (fr_FR,en_US,en_GB,de_DE,pt_BR,es_ES,it_IT,eu_ES,tr_TR,zh_CN) system.language=fr_FR ## set the keyboard layout (fr,en,de,us,es) system.kblayout=fr ## Set you local time ## Select your timezone from : ls /usr/share/zoneinfo/ (string) ;system.timezone=Europe/Paris # ------------ F - UPDATES ------------ # ## Automatically check for updates at start (0,1) updates.enabled=1 # Update type : default to stable updates.type=stable # ------------ G - HERE IT IS - GLOBAL EMULATOR CONFIGURATION ------------ # ## The global value will be used for all emulators, except if the value ## is redefined in the emulator ## Set game resolution for emulators ## Please don't modify this setting ## This arch does not support the video mode switch ## (string) global.videomode=default ## Shader set ## Automatically select shaders for all systems ## (none, retro, scanlines) global.shaderset=none ## Once enabled, your screen will be cropped, and you will have a pixel perfect image (0,1) global.integerscale=0 ## Set gpslp shader for all emulators (prefer shadersets above). Absolute path (string) global.shaders= ## Set ratio for all emulators (auto,4/3,16/9,16/10,custom) global.ratio=auto ## Set smooth for all emulators (0,1) global.smooth=1 ## Set rewind for all emulators (0,1) global.rewind=1 ## Set autosave/load savestate for all emulators (0,1) global.autosave=0 ## Enable retroarchievements (0,1) ## Set your www.retroachievements.org username/password ## Escape your special chars (# ; $) with a backslash : $ => \$ global.retroachievements=0 global.retroachievements.hardcore=0 global.retroachievements.username= global.retroachievements.password= ## Set retroarch input driver (auto, udev, sdl2) ## If you don't have issues with your controllers, let auto global.inputdriver=auto ## If you do not want recalboxOS to generate the configuration for all emulators (string) ;global.configfile=/path/to/my/configfile.cfg ## Demo screensaver parameters ## Set the system list from which ES will run random games ## Empty list or unexisting key means all available systems global.demo.systemlist=3do,amigacd32,atari2600,atari5200,atari7800,daphne,fbneo,fds,gamegear,gba,lynx,mame,mastersystem,megadrive,neogeo,nes,ngpc,pcengine,sega32x,sg1000,snes ## Default demo game sessions last 90s. Change this value if you want shorter or longer sessions ;global.demo.duration=90 ## Default game info screen duration lasts 6s. Change this value if you want shorter or longer info screens. ;global.demo.infoscreenduration=6 ## Retroarch AI Translation service ## Comment out or set to 0 the following key if you don't want the AI service global.translate=1 ## Set the source and the target languages. ## Allowed language list: EN, ES, FR, IT, DE, JP, NL, CS, DA, SV, HR, KO, ZH_CN, ZH_TW, CA, BG, BN, EU, AZ, AR, SQ, ## AF, EO, ET, TL, FI, GL, KA, EL, GU, HT, IW, HI, HU, IS, ID, GA, KN, LA, LV, LT, MK, MS, ## MT, NO, FA, PL, PT, RO, RU, SR, SK, SL, SW, TA, TE, TH, TR, UK, UR, VI, CY, YI ## Setting the translate.from key to a specified language may speed up or give more accurate results ## If translate.to key is commented, the default value is extracted from system.language or, if system.language is ## undefined, set to auto (=EN). global.translate.from=auto global.translate.to=auto ## zTranslate API Key ## go to https://ztranslate.net and create an account. ## validate your account, then log in and go to the settngs page ## Look for the API Key at the bottom of the page, then uncomment the following key and paste your API Key: ;global.translate.apikey=RECALBOX ## Other translation service ## If you want to use another translation service or a custom API call, use this key to ## specify the url to call. If the key is not empty, it is used instead of zTranslation's API Key ;global.translate.url= # ------------ H - EMULATORS CHOICES ----------- # ## You can override the global configurations here ## Here is the snes example ;snes.core=snes9x2010 ;snes.shaders=/recalbox/share/shaders/shaders_glsl/mysnesshader.gplsp ;snes.ratio=16/9 ;snes.smooth=0 ;snes.rewind=1 ;snes.autosave=0 ;snes.emulator=libretro ;snes.integerscale=0 ## If you do not want recalboxOS to generate the configuration for the emulator: ;snes.configfile=/path/to/my/configfile.cfg ## Default cores for Odroid XU4 ;snes.core=snes9x n64.core=gliden64 ## NeoGeo emulator ## You can use pifba or a libretro core (fba2x,libretro) neogeo.emulator=libretro ## If you set libretro as neogeo.emulator, the line below sets the retroarch core (fbneo, mame2000) neogeo.core=fbneo ## Demo screensaver parameters ## Include or exclude a particular system from the demo screensaver ## You may change the global.demo.systemlist key or include/exclude every single system ;snes.demo.include=0 ## Set the session duration for a particular system ;snes.demo.duration=90 # ------------ J - TFT SECONDARY SCREEN ----------- # #Second miniTFT screen as marquee to display scrapes and videos #Enable it with system.secondMiniTFT.enabled=1, disable with system.secondMiniTFT.enabled=0 #this configuration is REQUIRED system.secondminitft.enabled=0 #Type of mini TFT : OGST, unknown #Most of spi tft screen are enabled thanks to overlays in /boot/config.txt in rpi and /boot/config.ini on odroidxu4 #please check the specific configuration of your screen #Some examples are available on the page ..... # values are : # - overlay : screen configured through overlays in /boot/config.txt or /boot/config.ini (odroidxu4/ogst) # - default : the rest of the world #this configuration is REQUIRED if system.secondminitft.enabled=1 ;system.secondminitft.type=overlay #Choose the resolution of your screen #miniTFT resolution 320x240 -> 240p, 480x320 -> 320p #this configuration is REQUIRED if system.secondminitft.enabled=1 ;system.secondminitft.resolution=240p #Scraped image aspect on tft screen : fbv display option # options available : stretch, ignore-aspect, enlarge. # stretch : Strech (using a simple resizing routine) the image to fit onto screen if necessary # alpha : use the alpha channel (if applicable) # ignore-aspect : Ignore the image aspect while resizing # enlarge : Enlarge the image to fit the whole screen if necessary # 1 = enabled, 0 = disabled #this configuration is REQUIRED if system.secondminitft.enabled=1 ;system.secondminitft.imagestretchenabled=1 ;system.secondminitft.imageenlargeenabled=0 ;system.secondminitft.imagealphaenabled=0 ;system.secondminitft.imageignoreaspectenabled=1 #When activating the second TFT screen, you may want to display #game scraped video only on the second screen. This variable #allows you to disable scraped video playing in ES during game browsing #system.secondminitft.disablevideoines=1 disable video playing in ES #system.secondminitft.disablevideoines=0 enable video playing in ES #this configuration is OPTIONAL if system.secondminitft.enabled=1 ;system.secondminitft.disablevideoines=1 #if the backlight of your your screen can be manage by PWM, #indicates the GPIO value of your PWM control #WiringPi and its gpio program will be used to control the backlight #when RB goes in SLEEP mode, and when it wakes up. #On raspberry pi, PWMs cannot be used simultaneously with Jack sound output. #If your are using HDMI or a Audio hat you can use backlight PWM control for the second screen #If you are using Jack output please leave commented. #The Screen will be switch down in Sleep mode, and switch on when it wakes up. #On OGST, only this mode is available. #this configuration is OPTIONAL if system.secondminitft.enabled=1 ;system.secondminitft.backlightcontrol=18 # system.secondminitft.usemarquee variabla allows you to display a different # image during running game. just creat a directory named "marquees" in media # aside videos and images and put new images with the same name as in images # example : # - /recalbox/share/roms/neogeo/media/marquees/alpham2.png # - /recalbox/share/roms/neogeo/media/images/alpham2.png # if set to 1, in game the marquee images will be displayed # if set to 0, in game the scraped images will be displayed ;system.secondminitft.usemarquee=0 #system.secondminitft.sleepenabled allows you to enable/disable #sleep mode for the second TFT. If set to 1 sleep mode is enabled and #backlight of the screen will be OFF. If set to 0, sleep mode is #disabled and the backlight of the screen will be always On ;system.secondminitft.sleepenabled=0 # ------------ I - NETPLAY PARAMETERS ----------- # ## All these values are handled by Recalbox itself global.netplay=1 global.netplay.nickname= global.netplay.port=55435 global.netplay.relay= global.netplay.systems=fbneo,mame,mastersystem,megadrive,neogeo,nes,pcengine,sega32x,sg1000,snes,supergrafx,atari2600,pcenginecd,pcfx,fds,tic80,segacd,mrboom,colecovision global.netplay.lobby=http://lobby.libretro.com/list/ ## Configurations generated by Recalbox emulationstation.theme.recalbox-next.colorset=1-light blue colors emulationstation.theme.recalbox-next.gameclipview=0 - DEFAULT emulationstation.theme.recalbox-next.gamelistview=1-standard gamelist emulationstation.theme.recalbox-next.region=us emulationstation.theme.recalbox-next.iconset=1-standard icons emulationstation.theme.recalbox-next.menuset=1-light blue icons emulationstation.theme.recalbox-next.systemview=1-vertical left system.firsttimeuse=0 emulationstation.pad0=030000005e0400008e02000014010000:Xbox 360 Controller emulationstation.clock=1mon fichier config.ini
[generic] ; Device Tree Overlay overlay_resize=16384 ; uncomment next line to enable Odroid XU4 OGST overlay_profile=hktft_cs_ogst overlays="spi0 i2c0 i2c1 uart0" [overlay_hktft_cs_ogst] overlays="hktft-cs-ogst i2c0" -
@davidb2111 Merci de ces précisions. Ca redonne un peu d'espoir.
-
@cedric-debuiselle Je ne comprends pas bien, ces fichiers ne sont du tout comme la solution donnée.
-
@loli72 said in Retour 7.2.2 sur XU4:
@cedric-debuiselle Je ne comprends pas bien, ces fichiers ne sont du tout comme la solution donnée.
j'ai indiqué les fichier que j'ai après la mise en route de recalbox
la je vais essayer d'installer retropie ou emulationstation, car je voudrais juste allumer l'écran pour voir si il n'est pas défectueux
si il y avait une commande pour mettre le rétro-éclairage ou juste une image ça serais pratique -
Je suis tombé sur une de mes vieilles sd card avec la 6.1.1, matériel fonctionne de mon côté problème de l'OS
-
@cedric-debuiselle
Normalement, si l'OGST est détecté, tu devrais avoir un fichier système/dev/fb1
Tu peux lui envoyer des données brutes avec la commandedd, je pense. -
@davidb2111 Bonne nouvelle !
Merci d'avoir pris le temps d'analyser le problème et de nous avoir donné ces informations.
Bon courage à toute l'équipe
Odroid XU4Q + Boitier OGST
-
@davidb2111 said in Retour 7.2.2 sur XU4:
@cedric-debuiselle
Normalement, si l'OGST est détecté, tu devrais avoir un fichier système/dev/fb1
Tu peux lui envoyer des données brutes avec la commandedd, je pense.j'ai l'impression qu'on a un soucis de détection de l'écran, normalement je devrais d'après se que tu me dit un fichier fb1, dans l'emplacement fichier racine dev/, j'en ai aucun
-
Pourrais-tu m'envoyer la sortie de la commande
dmesg | grep fbstp ? -
@davidb2111
/boot$ dmesg | grep fb
[ 3.336086] exynos-drm exynos-drm: fb0: exynosdrmfb frame buffer devicedit moi je voudrais mettre une signature comme toi sur mon profil j'arrive pas à trouver où sais
-
@cedric-debuiselle said in Retour 7.2.2 sur XU4:
dit moi je voudrais mettre une signature comme toi sur mon profil j'arrive pas à trouver où sais
ta réputation est de 0 donc tu ne peux pas
-
-
@davidb2111 Merci pour ces retours, ça fait plaisir !
-
@cedric-debuiselle tu as réussi à ressoude ton problème ?
moi de mon coté je viens d'essayer de faire une nouvelle installe sur une nouvelle carte SD et sans surprise toujours rien .... -
@cedric-debuiselle said in Retour 7.2.2 sur XU4:
@davidb2111
/boot$ dmesg | grep fb
[ 3.336086] exynos-drm exynos-drm: fb0: exynosdrmfb frame buffer devicedit moi je voudrais mettre une signature comme toi sur mon profil j'arrive pas à trouver où sais
Arg, le module tft n'est pas chargé. Tu pourrais m'envoyer le résultat de la commande
dmesg, ton fichier/boot/boot.iniet ton fichier/boot/config.ini, stp ? -
@davidb2111 said in Retour 7.2.2 sur XU4:
@cedric-debuiselle said in Retour 7.2.2 sur XU4:
@davidb2111
/boot$ dmesg | grep fb
[ 3.336086] exynos-drm exynos-drm: fb0: exynosdrmfb frame buffer devicedit moi je voudrais mettre une signature comme toi sur mon profil j'arrive pas à trouver où sais
Arg, le module tft n'est pas chargé. Tu pourrais m'envoyer le résultat de la commande
dmesg, ton fichier/boot/boot.iniet ton fichier/boot/config.ini, stp ?dsmeg
# dmesg [ 0.000000] Booting Linux on physical CPU 0x100 [ 0.000000] Linux version 5.4.109 (root@208a151257ba) (gcc version 10.2.0 (Buildroot 2020.11-dirty)) #1 SMP PREEMPT Thu Jun 17 21:48:16 CEST 2021 [ 0.000000] CPU: ARMv7 Processor [410fc073] revision 3 (ARMv7), cr=10c5387d [ 0.000000] CPU: div instructions available: patching division code [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] OF: fdt: Machine model: Hardkernel Odroid XU4 [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] cma: Reserved 128 MiB at 0xb6800000 [ 0.000000] Samsung CPU ID: 0xe5422001 [ 0.000000] On node 0 totalpages: 518656 [ 0.000000] Normal zone: 1728 pages used for memmap [ 0.000000] Normal zone: 0 pages reserved [ 0.000000] Normal zone: 196608 pages, LIFO batch:63 [ 0.000000] HighMem zone: 322048 pages, LIFO batch:63 [ 0.000000] Running under secure firmware. [ 0.000000] percpu: Embedded 20 pages/cpu s52428 r8192 d21300 u81920 [ 0.000000] pcpu-alloc: s52428 r8192 d21300 u81920 alloc=20*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5 [0] 6 [0] 7 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 516928 [ 0.000000] Kernel command line: label=RECALBOX console=ttySAC2,115200n8 consoleblank=0 vt.global_cursor_default=0 governor=performance video=HDMI-A-1:1920x1080@60 HPD=false vout=hdmi s5p_mfc.mem=16M [ 0.000000] hdmi: using HDMI mode [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] Memory: 1906832K/2074624K available (10240K kernel code, 781K rwdata, 2752K rodata, 1024K init, 322K bss, 36720K reserved, 131072K cma-reserved, 1157120K highmem) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] random: get_random_bytes called from start_kernel+0x330/0x50c with crng_init=0 [ 0.000000] Switching to timer-based delay loop, resolution 41ns [ 0.000000] clocksource: mct-frc: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns [ 0.000007] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 89478484971ns [ 0.000030] genirq: irq_chip COMBINER did not update eff. affinity mask of irq 49 [ 0.001635] arch_timer: cp15 timer(s) running at 24.00MHz (phys). [ 0.001654] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns [ 0.001674] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns [ 0.001687] Ignoring duplicate/late registration of read_current_timer delay [ 0.002214] Console: colour dummy device 80x30 [ 0.002258] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=96000) [ 0.002274] pid_max: default: 32768 minimum: 301 [ 0.002473] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) [ 0.002496] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) [ 0.003590] CPU: Testing write buffer coherency: ok [ 0.004169] CPU0: thread -1, cpu 0, socket 1, mpidr 80000100 [ 0.005049] Setting up static identity map for 0x40100000 - 0x40100060 [ 0.005339] ARM CCI driver probed [ 0.005904] Exynos MCPM support installed [ 0.006186] rcu: Hierarchical SRCU implementation. [ 0.008630] soc soc0: Exynos: CPU[EXYNOS5800] PRO_ID[0xe5422001] REV[0x1] Detected [ 0.009134] smp: Bringing up secondary CPUs ... [ 0.010085] CPU1: thread -1, cpu 1, socket 1, mpidr 80000101 [ 0.011155] CPU2: thread -1, cpu 2, socket 1, mpidr 80000102 [ 0.012172] CPU3: thread -1, cpu 3, socket 1, mpidr 80000103 [ 0.013243] CPU4: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.013253] CPU4: Spectre v2: firmware did not set auxiliary control register IBE bit, system vulnerable [ 0.014381] CPU5: thread -1, cpu 1, socket 0, mpidr 80000001 [ 0.014389] CPU5: Spectre v2: firmware did not set auxiliary control register IBE bit, system vulnerable [ 0.015476] CPU6: thread -1, cpu 2, socket 0, mpidr 80000002 [ 0.015485] CPU6: Spectre v2: firmware did not set auxiliary control register IBE bit, system vulnerable [ 0.016622] CPU7: thread -1, cpu 3, socket 0, mpidr 80000003 [ 0.016631] CPU7: Spectre v2: firmware did not set auxiliary control register IBE bit, system vulnerable [ 0.016821] smp: Brought up 1 node, 8 CPUs [ 0.016840] SMP: Total of 8 processors activated (384.00 BogoMIPS). [ 0.016848] CPU: All CPU(s) started in HYP mode. [ 0.016855] CPU: Virtualization extensions available. [ 0.017948] devtmpfs: initialized [ 0.037597] VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0 [ 0.037977] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.037999] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.040305] pinctrl core: initialized pinctrl subsystem [ 0.042631] NET: Registered protocol family 16 [ 0.045724] DMA: preallocated 2048 KiB pool for atomic coherent allocations [ 0.047171] audit: initializing netlink subsys (disabled) [ 0.047379] audit: type=2000 audit(0.044:1): state=initialized audit_enabled=0 res=1 [ 0.048109] cpuidle: using governor menu [ 0.048480] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. [ 0.048492] hw-breakpoint: maximum watchpoint size is 8 bytes. [ 0.112665] EXYNOS5420 PMU initialized [ 0.226521] iommu: Default domain type: Translated [ 0.226946] usbcore: registered new interface driver usbfs [ 0.227001] usbcore: registered new interface driver hub [ 0.227059] usbcore: registered new device driver usb [ 0.227660] s3c-i2c 12c80000.i2c: slave address 0x00 [ 0.227678] s3c-i2c 12c80000.i2c: bus frequency set to 65 KHz [ 0.227951] s3c-i2c 12c80000.i2c: i2c-2: S3C I2C adapter [ 0.228461] mc: Linux media interface: v0.10 [ 0.228503] videodev: Linux video capture interface: v2.00 [ 0.228608] pps_core: LinuxPPS API ver. 1 registered [ 0.228650] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it> [ 0.229029] Advanced Linux Sound Architecture Driver Initialized. [ 0.229799] clocksource: Switched to clocksource mct-frc [ 0.521818] random: fast init done [ 0.955824] VFS: Disk quotas dquot_6.6.0 [ 0.955899] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.967235] thermal_sys: Registered thermal governor 'step_wise' [ 0.969534] NET: Registered protocol family 2 [ 0.970295] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear) [ 0.970330] TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear) [ 0.970410] TCP bind hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 0.970567] TCP: Hash tables configured (established 8192 bind 8192) [ 0.970674] UDP hash table entries: 512 (order: 2, 16384 bytes, linear) [ 0.970720] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear) [ 0.970940] NET: Registered protocol family 1 [ 0.971591] RPC: Registered named UNIX socket transport module. [ 0.971603] RPC: Registered udp transport module. [ 0.971613] RPC: Registered tcp transport module. [ 0.971624] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.971842] Trying to unpack rootfs image as initramfs... [ 0.980277] Freeing initrd memory: 1264K [ 0.981689] hw perfevents: enabled with armv7_cortex_a7 PMU driver, 5 counters available [ 0.982575] hw perfevents: enabled with armv7_cortex_a15 PMU driver, 7 counters available [ 0.986476] Initialise system trusted keyrings [ 0.986706] workingset: timestamp_bits=14 max_order=19 bucket_order=5 [ 0.995778] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.996506] NFS: Registering the id_resolver key type [ 0.996531] Key type id_resolver registered [ 0.996542] Key type id_legacy registered [ 0.996563] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 0.996581] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 0.996620] romfs: ROMFS MTD (C) 2007 Red Hat, Inc. [ 1.026366] Key type asymmetric registered [ 1.026380] Asymmetric key pa**er 'x509' registered [ 1.026441] bounce: pool size: 64 pages [ 1.026483] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 245) [ 1.026689] io scheduler mq-deadline registered [ 1.026703] io scheduler kyber registered [ 1.026850] io scheduler bfq registered [ 1.029339] samsung-usb2-phy 12130000.phy: 12130000.phy supply vbus not found, using dummy regulator [ 1.030375] exynos5_usb3drd_phy 12100000.phy: 12100000.phy supply vbus not found, using dummy regulator [ 1.030462] exynos5_usb3drd_phy 12100000.phy: 12100000.phy supply vbus-boost not found, using dummy regulator [ 1.030836] exynos5_usb3drd_phy 12500000.phy: 12500000.phy supply vbus not found, using dummy regulator [ 1.030920] exynos5_usb3drd_phy 12500000.phy: 12500000.phy supply vbus-boost not found, using dummy regulator [ 1.039357] dma-pl330 121a0000.pdma: Loaded driver for PL330 DMAC-241330 [ 1.039373] dma-pl330 121a0000.pdma: DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32 [ 1.042056] dma-pl330 121b0000.pdma: Loaded driver for PL330 DMAC-241330 [ 1.042072] dma-pl330 121b0000.pdma: DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32 [ 1.042945] dma-pl330 10800000.mdma: Loaded driver for PL330 DMAC-241330 [ 1.042961] dma-pl330 10800000.mdma: DBUFF-64x8bytes Num_Chans-8 Num_Peri-1 Num_Events-32 [ 1.111827] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 1.114097] 12c20000.serial: ttySAC2 at MMIO 0x12c20000 (irq = 62, base_baud = 0) is a S3C6400/10 [ 1.978573] printk: console [ttySAC2] enabled [ 1.984530] exynos-trng 10830600.rng: Exynos True Random Number Generator. [ 1.990845] exynos-mixer 14450000.mixer: Adding to iommu group 0 [ 1.998541] exynos-drm-g2d 10850000.g2d: Adding to iommu group 1 [ 2.004542] exynos-rotator 11c00000.rotator: Adding to iommu group 2 [ 2.016760] mali 11800000.gpu: Failed to get regulator [ 2.020457] mali 11800000.gpu: Power control initialization failed [ 2.037228] brd: module loaded [ 2.053212] loop: module loaded [ 2.055686] libphy: Fixed MDIO Bus: probed [ 2.059315] usbcore: registered new interface driver r8152 [ 2.064485] usbcore: registered new interface driver cdc_ether [ 2.070275] usbcore: registered new interface driver cdc_subset [ 2.078319] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 2.083418] ehci-exynos: EHCI EXYNOS driver [ 2.087898] exynos-ehci 12110000.usb: EHCI Host Controller [ 2.093037] exynos-ehci 12110000.usb: new USB bus registered, assigned bus number 1 [ 2.100908] exynos-ehci 12110000.usb: irq 79, io mem 0x12110000 [ 2.121854] exynos-ehci 12110000.usb: USB 2.0 started, EHCI 1.00 [ 2.126670] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.04 [ 2.134652] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.141836] usb usb1: Product: EHCI Host Controller [ 2.146687] usb usb1: Manufacturer: Linux 5.4.109 ehci_hcd [ 2.152145] usb usb1: SerialNumber: 12110000.usb [ 2.157310] hub 1-0:1.0: USB hub found [ 2.160506] hub 1-0:1.0: 3 ports detected [ 2.165381] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 2.170617] ohci-exynos: OHCI EXYNOS driver [ 2.174950] exynos-ohci 12120000.usb: USB Host Controller [ 2.180151] exynos-ohci 12120000.usb: new USB bus registered, assigned bus number 2 [ 2.187883] exynos-ohci 12120000.usb: irq 79, io mem 0x12120000 [ 2.254067] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.04 [ 2.260880] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.268568] usb usb2: Product: USB Host Controller [ 2.272833] usb usb2: Manufacturer: Linux 5.4.109 ohci_hcd [ 2.278289] usb usb2: SerialNumber: 12120000.usb [ 2.283432] hub 2-0:1.0: USB hub found [ 2.286649] hub 2-0:1.0: 3 ports detected [ 2.292745] mousedev: PS/2 mouse device common for all mice [ 2.298054] i2c /dev entries driver [ 2.323170] vdd_ldo9: Bringing 3300000uV into 3000000-3000000uV [ 2.340548] vddq_mmc2: Bringing 3300000uV into 2800000-2800000uV [ 2.361183] vdd_sd: Bringing 3300000uV into 2800000-2800000uV [ 2.440955] s5m-rtc s2mps14-rtc: registered as rtc0 [ 2.444940] s2mps11-clk s2mps11-clk: DMA mask not set [ 2.452376] s5p-jpeg 11f50000.jpeg: Adding to iommu group 3 [ 2.456860] s5p-jpeg 11f50000.jpeg: encoder device registered as /dev/video20 [ 2.463766] s5p-jpeg 11f50000.jpeg: decoder device registered as /dev/video21 [ 2.470710] s5p-jpeg 11f50000.jpeg: Samsung S5P JPEG codec [ 2.476353] s5p-jpeg 11f60000.jpeg: Adding to iommu group 4 [ 2.482071] s5p-jpeg 11f60000.jpeg: encoder device registered as /dev/video22 [ 2.488982] s5p-jpeg 11f60000.jpeg: decoder device registered as /dev/video23 [ 2.495926] s5p-jpeg 11f60000.jpeg: Samsung S5P JPEG codec [ 2.502097] s5p-mfc 11000000.codec: Adding to iommu group 5 [ 2.524680] s5p-mfc 11000000.codec: preallocated 16 MiB buffer for the firmware and context buffers [ 2.532361] s5p-mfc 11000000.codec: Direct firmware load for s5p-mfc-v8.fw failed with error -2 [ 2.540973] s5p_mfc_load_firmware:69: Firmware is not present in the /lib/firmware directory nor compiled in kernel [ 2.551507] s5p-mfc 11000000.codec: decoder registered as /dev/video10 [ 2.557997] s5p-mfc 11000000.codec: encoder registered as /dev/video11 [ 2.566384] exynos-gsc 13e00000.video-scaler: Adding to iommu group 6 [ 2.572535] exynos-gsc 13e10000.video-scaler: Adding to iommu group 7 [ 2.588293] s3c2410-wdt 101d0000.watchdog: watchdog inactive, reset disabled, irq disabled [ 2.595736] device-mapper: uevent: version 1.0.3 [ 2.600006] device-mapper: ioctl: 4.41.0-ioctl (2019-09-16) initialised: dm-devel@redhat.com [ 2.624491] sdhci: Secure Digital Host Controller Interface driver [ 2.629221] sdhci: Copyright(c) Pierre Ossman [ 2.633718] Synopsys Designware Multimedia Card Interface Driver [ 2.640072] dwmmc_exynos 12200000.mmc: IDMAC supports 32-bit address mode. [ 2.646446] dwmmc_exynos 12200000.mmc: Using internal DMA controller. [ 2.652776] dwmmc_exynos 12200000.mmc: Version ID is 250a [ 2.658166] dwmmc_exynos 12200000.mmc: DW MMC controller at irq 81,64 bit host data width,64 deep fifo [ 2.667591] dwmmc_exynos 12200000.mmc: allocated mmc-pwrseq [ 2.672963] mmc_host mmc0: card is non-removable. [ 2.694191] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63) [ 2.715285] dwmmc_exynos 12220000.mmc: IDMAC supports 32-bit address mode. [ 2.720736] dwmmc_exynos 12220000.mmc: Using internal DMA controller. [ 2.727127] dwmmc_exynos 12220000.mmc: Version ID is 250a [ 2.732508] dwmmc_exynos 12220000.mmc: DW MMC controller at irq 82,64 bit host data width,64 deep fifo [ 2.757214] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63) [ 2.778967] ledtrig-cpu: registered to indicate activity on CPUs [ 2.784580] s5p-secss 10830000.sss: s5p-sss driver registered [ 2.789475] hidraw: raw HID events driver (C) Jiri Kosina [ 2.802224] exynos-nocp: new NoC Probe device registered: 10ca1000.nocp [ 2.807487] exynos-nocp: new NoC Probe device registered: 10ca1400.nocp [ 2.814076] exynos-nocp: new NoC Probe device registered: 10ca1800.nocp [ 2.820657] exynos-nocp: new NoC Probe device registered: 10ca1c00.nocp [ 2.827460] exynos-ppmu: new PPMU device registered 10d00000.ppmu (ppmu-event3-dmc0_0) [ 2.835165] exynos-ppmu: new PPMU device registered 10d10000.ppmu (ppmu-event3-dmc0_1) [ 2.839696] mmc_host mmc0: Bus speed (slot 0) = 200000000Hz (slot req 200000000Hz, actual 200000000HZ div = 0) [ 2.843650] exynos-ppmu: new PPMU device registered 10d60000.ppmu (ppmu-event3-dmc1_0) [ 2.860887] exynos-ppmu: new PPMU device registered 10d70000.ppmu (ppmu-event3-dmc1_1) [ 2.870323] exynos5-dmc 10c20000.memory-controller: DMC initialized, in irq mode: 0 [ 2.877322] exynos-adc 12d10000.adc: IRQ index 1 not found [ 2.887467] NET: Registered protocol family 17 [ 2.890456] NET: Registered protocol family 15 [ 2.894897] Key type dns_resolver registered [ 2.899514] Registering SWP/SWPB emulation handler [ 2.904008] registered taskstats version 1 [ 2.907952] Loading compiled-in X.509 certificates [ 2.912808] Key type ._fscrypt registered [ 2.916699] Key type .fscrypt registered [ 2.921412] Key type encrypted registered [ 2.957932] exynos-asv 10000000.chipid: cpu0 opp0, freq: 1500 missing [ 2.962950] exynos-asv 10000000.chipid: cpu4 opp0, freq: 2100 missing [ 2.971509] OF: graph: no port node found in /soc/hdmi@14530000 [ 2.977747] [drm] Exynos DRM: using 14450000.mixer device for DMA mapping operations [ 2.984197] exynos-drm exynos-drm: bound 14450000.mixer (ops 0xc0b6dbe8) [ 2.990753] exynos-drm exynos-drm: bound 14530000.hdmi (ops 0xc0b6e26c) [ 2.997655] exynos-drm-g2d 10850000.g2d: The Exynos G2D (ver 4.1) successfully registered. [ 3.005541] exynos-drm exynos-drm: bound 10850000.g2d (ops 0xc0b6f1b4) [ 3.012150] exynos-rotator 11c00000.rotator: The exynos rotator has been probed successfully [ 3.012665] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 52000000Hz, actual 50000000HZ div = 0) [ 3.020452] exynos-drm exynos-drm: bound 11c00000.rotator (ops 0xc0b6fa40) [ 3.020462] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 3.030813] mmc_host mmc0: Bus speed (slot 0) = 266666666Hz (slot req 200000000Hz, actual 133333333HZ div = 1) [ 3.036990] [drm] No driver support for vblank timestamp query. [ 3.059884] mmc0: new HS400 MMC card at address 0001 [ 3.065931] mmcblk0: mmc0:0001 BJTD4R 29.1 GiB [ 3.069880] mmcblk0boot0: mmc0:0001 BJTD4R partition 1 4.00 MiB [ 3.075737] mmcblk0boot1: mmc0:0001 BJTD4R partition 2 4.00 MiB [ 3.081455] mmcblk0rpmb: mmc0:0001 BJTD4R partition 3 4.00 MiB, chardev (244:0) [ 3.092554] mmcblk0: p1 p2 p3 [ 3.269510] Console: switching to colour frame buffer device 240x67 [ 3.290997] exynos-drm exynos-drm: fb0: exynosdrmfb frame buffer device [ 3.298029] [drm] Initialized exynos 1.1.0 20180330 for exynos-drm on minor 0 [ 3.306180] mali 11800000.gpu: GPU identified as 0x0620 r0p1 status 0 [ 3.311209] mali 11800000.gpu: Protected mode not available [ 3.317213] mali 11800000.gpu: Probed as mali0 [ 3.322625] dwc3 12000000.dwc3: Failed to get clk 'ref': -2 [ 3.327147] xhci-hcd xhci-hcd.8.auto: xHCI Host Controller [ 3.332205] xhci-hcd xhci-hcd.8.auto: new USB bus registered, assigned bus number 3 [ 3.340059] xhci-hcd xhci-hcd.8.auto: hcc params 0x0220f04c hci version 0x100 quirks 0x0000000002010010 [ 3.349234] xhci-hcd xhci-hcd.8.auto: irq 159, io mem 0x12000000 [ 3.355424] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.04 [ 3.363390] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.370578] usb usb3: Product: xHCI Host Controller [ 3.375430] usb usb3: Manufacturer: Linux 5.4.109 xhci-hcd [ 3.380889] usb usb3: SerialNumber: xhci-hcd.8.auto [ 3.386081] hub 3-0:1.0: USB hub found [ 3.389465] hub 3-0:1.0: 1 port detected [ 3.393567] xhci-hcd xhci-hcd.8.auto: xHCI Host Controller [ 3.398832] xhci-hcd xhci-hcd.8.auto: new USB bus registered, assigned bus number 4 [ 3.406458] xhci-hcd xhci-hcd.8.auto: Host supports USB 3.0 SuperSpeed [ 3.412994] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM. [ 3.421146] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.04 [ 3.424709] devfreq 11800000.gpu: Couldn't update frequency transition information. [ 3.429244] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.429248] usb usb4: Product: xHCI Host Controller [ 3.448914] usb usb4: Manufacturer: Linux 5.4.109 xhci-hcd [ 3.454372] usb usb4: SerialNumber: xhci-hcd.8.auto [ 3.459529] hub 4-0:1.0: USB hub found [ 3.462969] hub 4-0:1.0: 1 port detected [ 3.468515] dwc3 12400000.dwc3: Failed to get clk 'ref': -2 [ 3.472941] xhci-hcd xhci-hcd.9.auto: xHCI Host Controller [ 3.478090] xhci-hcd xhci-hcd.9.auto: new USB bus registered, assigned bus number 5 [ 3.485960] xhci-hcd xhci-hcd.9.auto: hcc params 0x0220f04c hci version 0x100 quirks 0x0000000002010010 [ 3.495123] xhci-hcd xhci-hcd.9.auto: irq 160, io mem 0x12400000 [ 3.501296] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.04 [ 3.509279] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.516469] usb usb5: Product: xHCI Host Controller [ 3.521323] usb usb5: Manufacturer: Linux 5.4.109 xhci-hcd [ 3.526780] usb usb5: SerialNumber: xhci-hcd.9.auto [ 3.531925] hub 5-0:1.0: USB hub found [ 3.535375] hub 5-0:1.0: 1 port detected [ 3.539453] xhci-hcd xhci-hcd.9.auto: xHCI Host Controller [ 3.544722] xhci-hcd xhci-hcd.9.auto: new USB bus registered, assigned bus number 6 [ 3.552345] xhci-hcd xhci-hcd.9.auto: Host supports USB 3.0 SuperSpeed [ 3.558883] usb usb6: We don't know the algorithms for LPM for this host, disabling LPM. [ 3.566987] usb usb6: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.04 [ 3.575137] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.582326] usb usb6: Product: xHCI Host Controller [ 3.587177] usb usb6: Manufacturer: Linux 5.4.109 xhci-hcd [ 3.592637] usb usb6: SerialNumber: xhci-hcd.9.auto [ 3.597777] hub 6-0:1.0: USB hub found [ 3.601232] hub 6-0:1.0: 1 port detected [ 3.606039] s3c-rtc 101e0000.rtc: rtc disabled, re-enabling [ 3.610754] rtc rtc1: invalid alarm value: 1900-01-21T00:00:00 [ 3.616578] s3c-rtc 101e0000.rtc: registered as rtc1 [ 3.622941] exynos-bus: new bus device registered: soc:bus_wcore ( 84000 KHz ~ 400000 KHz) [ 3.630251] exynos-bus: new bus device registered: soc:bus_noc ( 67000 KHz ~ 100000 KHz) [ 3.638161] exynos-bus: new bus device registered: soc:bus_fsys_apb (100000 KHz ~ 200000 KHz) [ 3.646550] exynos-bus: new bus device registered: soc:bus_fsys (100000 KHz ~ 200000 KHz) [ 3.654849] exynos-bus: new bus device registered: soc:bus_fsys2 ( 75000 KHz ~ 150000 KHz) [ 3.663190] exynos-bus: new bus device registered: soc:bus_mfc ( 96000 KHz ~ 333000 KHz) [ 3.671191] exynos-bus: new bus device registered: soc:bus_gen ( 89000 KHz ~ 267000 KHz) [ 3.679138] exynos-bus: new bus device registered: soc:bus_peri ( 67000 KHz ~ 67000 KHz) [ 3.687448] exynos-bus: new bus device registered: soc:bus_g2d ( 84000 KHz ~ 333000 KHz) [ 3.695468] exynos-bus: new bus device registered: soc:bus_g2d_acp ( 67000 KHz ~ 267000 KHz) [ 3.703856] exynos-bus: new bus device registered: soc:bus_jpeg ( 75000 KHz ~ 300000 KHz) [ 3.712007] exynos-bus: new bus device registered: soc:bus_jpeg_apb ( 84000 KHz ~ 167000 KHz) [ 3.720399] exynos-bus: new bus device registered: soc:bus_disp1_fimd (120000 KHz ~ 200000 KHz) [ 3.729105] exynos-bus: new bus device registered: soc:bus_disp1 (120000 KHz ~ 300000 KHz) [ 3.737344] exynos-bus: new bus device registered: soc:bus_gscl_scaler (150000 KHz ~ 300000 KHz) [ 3.746223] exynos-bus: new bus device registered: soc:bus_mscl ( 84000 KHz ~ 400000 KHz) [ 3.757656] s5m-rtc s2mps14-rtc: setting system clock to 2021-07-19T10:11:10 UTC (1626689470) [ 3.790351] ALSA device list: [ 3.791839] No soundcards found. [ 3.796229] Freeing unused kernel memory: 1024K [ 3.802031] Run /init as init process [ 3.881987] usb 4-1: new SuperSpeed Gen 1 USB device number 2 using xhci-hcd [ 3.887257] EXT4-fs (mmcblk0p3): recovery complete [ 3.892832] EXT4-fs (mmcblk0p3): mounted filesystem with ordered data mode. Opts: (null) [ 3.910845] usb 4-1: New USB device found, idVendor=05e3, idProduct=0616, bcdDevice=22.23 [ 3.917554] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 3.924654] usb 4-1: Product: USB3.0 Hub [ 3.928585] usb 4-1: Manufacturer: GenesysLogic [ 3.950865] /dev/loop0: Can't open blockdev [ 3.954182] /dev/loop0: Can't open blockdev [ 3.957862] hub 4-1:1.0: USB hub found [ 3.961827] hub 4-1:1.0: 2 ports detected [ 4.033851] usb 3-1: new high-speed USB device number 2 using xhci-hcd [ 4.192603] usb 3-1: New USB device found, idVendor=05e3, idProduct=0610, bcdDevice=22.23 [ 4.199310] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 4.206454] usb 3-1: Product: USB2.0 Hub [ 4.210325] usb 3-1: Manufacturer: GenesysLogic [ 4.277051] usb 4-1.1: new SuperSpeed Gen 1 USB device number 3 using xhci-hcd [ 4.282914] hub 3-1:1.0: USB hub found [ 4.286796] hub 3-1:1.0: 2 ports detected [ 4.302814] usb 4-1.1: New USB device found, idVendor=0781, idProduct=5583, bcdDevice= 1.00 [ 4.309706] usb 4-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 4.317045] usb 4-1.1: Product: SanDisk 3.2Gen1 [ 4.321594] usb 4-1.1: Manufacturer: USB [ 4.325567] usb 4-1.1: SerialNumber: 0101584b1850411093e248f64aaf1786c058a1878ee9fa82adba44f6c2aac72eabc90000000000000000000098b924c2ff89190083558107432b5cdf [ 4.627549] hwmon hwmon0: fan_speeds : set_fan_speed [102 140 178 252] [ 4.632725] usb 3-1.2: new high-speed USB device number 3 using xhci-hcd [ 4.743162] usb 3-1.2: New USB device found, idVendor=05e3, idProduct=0610, bcdDevice=32.98 [ 4.750052] usb 3-1.2: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 4.754061] usb 6-1: new SuperSpeed Gen 1 USB device number 2 using xhci-hcd [ 4.757334] usb 3-1.2: Product: USB2.0 Hub [ 4.782863] usb 6-1: New USB device found, idVendor=0bda, idProduct=8153, bcdDevice=30.00 [ 4.789612] usb 6-1: New USB device strings: Mfr=1, Product=2, SerialNumber=6 [ 4.796736] usb 6-1: Product: USB 10/100/1000 LAN [ 4.801400] usb 6-1: Manufacturer: Realtek [ 4.805492] usb 6-1: SerialNumber: 000001000000 [ 4.821312] hub 3-1.2:1.0: USB hub found [ 4.825171] hub 3-1.2:1.0: 4 ports detected [ 4.831455] udevd[228]: starting version 3.2.9 [ 4.846954] random: udevd: uninitialized urandom read (16 bytes read) [ 4.852043] random: udevd: uninitialized urandom read (16 bytes read) [ 4.858650] random: udevd: uninitialized urandom read (16 bytes read) [ 4.879192] udevd[230]: starting eudev-3.2.9 [ 4.993168] gpiomem-exynos 13400000.gpiomem: Initialised: GPIO register area is 2 [ 4.999815] gpiomem-exynos 13400000.gpiomem: Initialised: Registers at 0x13400000 [ 5.008539] input: gpio_keys as /devices/platform/gpio_keys/input/input0 [ 5.015956] gpiomem-exynos 13400000.gpiomem: Initialised: Registers at 0x14010000 [ 5.031225] usb 6-1: reset SuperSpeed Gen 1 USB device number 2 using xhci-hcd [ 5.102922] r8152 6-1:1.0 eth0: v1.10.11 [ 5.177906] usb 3-1.2.1: new full-speed USB device number 4 using xhci-hcd [ 5.251639] SCSI subsystem initialized [ 5.258262] usb-storage 4-1.1:1.0: USB Mass Storage device detected [ 5.264306] scsi host0: usb-storage 4-1.1:1.0 [ 5.268840] usbcore: registered new interface driver usb-storage [ 5.276823] usbcore: registered new interface driver uas [ 5.295135] usb 3-1.2.1: New USB device found, idVendor=045e, idProduct=028e, bcdDevice= 1.14 [ 5.302292] usb 3-1.2.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 5.309905] usb 3-1.2.1: Product: Controller [ 5.313956] usb 3-1.2.1: Manufacturer: ©Microsoft Corporation [ 5.319738] usb 3-1.2.1: SerialNumber: 065F3FE [ 5.343685] dma-pl330 3880000.adma: Loaded driver for PL330 DMAC-241330 [ 5.348854] dma-pl330 3880000.adma: DBUFF-4x8bytes Num_Chans-6 Num_Peri-16 Num_Events-6 [ 5.357679] samsung-i2s 3830000.i2s-sec: DMA channels sourced from device 3830000.i2s [ 5.367148] odroid-audio sound: snd-soc-dummy-dai <-> samsung-i2s mapping ok [ 5.372776] odroid-audio sound: i2s-hifi <-> snd-soc-dummy-dai mapping ok [ 5.380327] odroid-audio sound: snd-soc-dummy-dai <-> samsung-i2s-sec mapping ok [ 5.387002] dma-pl330 3880000.adma: PM domain MAU will not be powered off [ 5.565882] input: Microsoft X-Box 360 pad as /devices/platform/soc/soc:usb3-0/12000000.dwc3/xhci-hcd.8.auto/usb3/3-1/3-1.2/3-1.2.1/3-1.2.1:1.0/input/input1 [ 5.578677] usbcore: registered new interface driver xpad [ 6.270695] scsi 0:0:0:0: Direct-Access USB SanDisk 3.2Gen1 1.00 PQ: 0 ANSI: 6 [ 6.281190] sd 0:0:0:0: [sda] 240353280 512-byte logical blocks: (123 GB/115 GiB) [ 6.287549] sd 0:0:0:0: [sda] Write Protect is off [ 6.291980] sd 0:0:0:0: [sda] Mode Sense: 43 00 00 00 [ 6.292327] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [ 6.328906] sda: sda1 [ 6.328912] random: crng init done [ 6.333187] random: 5 urandom warning(s) missed due to ratelimiting [ 6.340586] sd 0:0:0:0: [sda] Attached SCSI removable disk [ 6.984094] Bluetooth: Core ver 2.22 [ 6.986528] NET: Registered protocol family 31 [ 6.990741] Bluetooth: HCI device and connection manager initialized [ 6.997003] Bluetooth: HCI socket layer initialized [ 7.001832] Bluetooth: L2CAP socket layer initialized [ 7.006891] Bluetooth: SCO socket layer initialized [ 7.056938] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 7.060831] Bluetooth: BNEP filters: protocol multicast [ 7.066009] Bluetooth: BNEP socket layer initialized [ 7.084508] 8021q: 802.1Q VLAN Support v1.8 [ 7.130559] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 7.168849] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 7.565291] fuse: init (API version 7.31) [ 8.744147] r8152 6-1:1.0 eth0: carrier on [ 10.200256] usbcore: registered new interface driver usbhid [ 10.204365] usbhid: USB HID core driver [ 10.556284] NET: Registered protocol family 10 [ 10.560378] Segment Routing with IPv6 [ 35.806311] vdd_ldo12: disabling #
